LabVIEW stopped working after windows update

Similar Questions

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• X 500 - 10W QOSMIO webcam stop working after Windows updates

  Hello.

  I have a Toshiba QOSMIO X 500 - 10W PQX33E-00R00CIT.

  When I format my laptop and you reinstall the operating system Windows 7 Ultimate 64 bit, the webcam works perfectly.
  After I updated windows via windows update webcam stops working. Also with Windows 10 company LTSB. What should I do? Thank you.

  P. S.
  According to me, is just a problem of software, not hardware. The webcam works perfectly until I do the windows updates! ' * ' Microsoft!

  I find the problem. Do not install the latest version of Microsoft Silverlight. I hope that I formatted my computer for the last time!

• Outlook 2010 has stopped working after Windows updates

  November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).

  After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.

  I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.

  Was it something wrong with the Windows updates?

  The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.

  He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »

• Broadcom Wireless stopped working after Windows updates

  Hello, everyone!

  I have a Pavilion dv6000 with wireless network. Everything was OK, but last Monday the blue wireless light was suddenly always amber and me did not have wireless access. These are the facts about my problem:

  * I reset my laptop to factory - wireless configuration works very well

  * Windows Update all installed, but one, updates - wireless works fine

  * I installed the new Windows Live Messenger - WIRELESS STOPED working

  * I uninstalled Windows Live Messenger - wireless works fine

  * Windows Update installed .NET Framework 3.5 (it was the update of Windows I jumped at step 2)-without WIRE EFFONDRES WORKING

  And now, my problem is that even if I try to "roll back" to a "restore point" before installing .NET, I get an error and I don't seem to be able to "Uninstall".NET 3.5. On the other hand, the pilot "Broadcom Wireless 802.11 g" has disappeared from the Device Manager and I don't seem to be able to reinstall it, or not reinstalling patches 'HP Wireless Manager' the problem.

  Can you help me, please?

  Thanks in advance,

  Nuno

  Work on laptop of my boss's son is having the same issue... I got to work by going into safe mode device manager and delete all references to pci bridge and restart... xp detects the wireless card as well as all pci bridge components and everything is golden... update XP sp3 now and go see if only the pipes still wireless card... will put in day this post when finished... im on xp, but I'm sure it would work for vista too many... questions you can email [email protected]

  * Update *.

  Installation of XP Service Pack 3 has made clear the wireless card again... is returned in Manager mode and the security apparatus and remove all references to the PCI subsystem devices except Bus PCI and ISA standard PCI bridge and rebooted and bam wireless card is back... it is quite boring... my recommendation would be to turn the builtin wireless power off and go buy a wireless usb card and do with it...

  Message edited by Akrifay on 02/20/2009 14:16

• Task Scheduler stopped working after Windows updates

  This just happened to one the many updates just installed.  Microsoft does not identify the Console as being updated but I did a restore + the task manager has been fine.

  Installed November put up-to-date and Scheduler of tasks is still a Virgin is in one of the updates. hidden of course.  If someone found the number of update, please send along!

  Hello

  Unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Satellite L350-262 - WLAN stopped working after Windows update

  Hi - help please!

  Everything was fine until an automatic update on windows 7 applied about 14/15 December 2010. After that I turned off the wireless LAN to save battery while off line, then the wire will not pass on, I am currently connected via a cable connection 10/100.

  I tried a restore when this problem first occurred, and it worked. However, the updates have applied new themselevs and I cannot now restore the update that seems to have caused the problem before the date on which took place.

  I updated the driver that the adapter is realtek adapter and I have applied this update - realtek_wlan_win7_20100702, it did not work.

  I ran the diagnostics which indicates the following:-Please note the wireless switch on the before the computer is on, and shows on the page of diagnostic, Diagnostics tool recognizes also when the switch is off, so it doesn't seem to be a physical problem with the wireless LAN switch, but something software related that has disabled the wireless LAN

  Network card diagnostics information:

  Network adapter wireless network connection driver information:

  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Reference of the manufacturer.... : Realtek Semiconductor Corp.
  Provider of...: Microsoft
  Version...: 6.1159.323.2009
  INF file name... . : C:\Windows\INF\net8187bv32.inf
  Date of the INF.... July 13, 2009 20:46:35
  Name of the section.... : RTL8187B.ndi
  Hardware... ID: usb\vid_0bda & pid_8198 & rev_0200
  Instance... state flags: 0x180200a
  Status code of Device Manager. . : 0
  IfType...: 71
  Type of physical support...: 9

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  Information for a diagnosis of connection
  The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
  Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Interface type: Native WiFi

  Connection incident diagnosed

  List of visible access points: 0 item (s) total, 0 article (s) poster

  History of connection

  Information for Auto Configuration ID 1

  List of visible networks: 0 item (s) total, 0 article (s) poster

  List of favorite networks: 0 item (s)

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  For all the info on this session, see the event information of wireless connectivity.

  Helper class: Auto-Configuration
  Initialize status: success

  Information for a diagnosis of connection
  The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
  Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Interface type: Native WiFi

  Result of diagnosis: problem found

  Root cause:
  WiFi is disabled

  Detailed root cause:
  Radio is off (SW switch)

  Repair option:
  Turn on wireless capability

  Network Diagnostics log
  File name: 3E316BFA-A7C3-496A-8FF9-810B3E247842. Diagnose.0.ETL

  Collection information
  Computer name:
  Windows Version: 6.1
  Architecture: x 86
  Time: Wednesday, December 29, 2010 08:56:08

  Anyone has any ideas I would be very grateful, thank you

  Hello

  as I remember, there was the user with the same question in this forum. I don't know if he could solve it... I recommend:

  1 remove all WiFi drivers installed on your system and restart the round, then. Afterwards, go to the driver page and download wlan driver http://aps2.toshiba-tro.de/wlan/?page=downloads
  2. If it still does not, restore to previous operating system

• The mouse scroll wheel stopped working after windows updates

  I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down.  It was a huge time saver, and I was used to it.

  I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center.  The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.

  In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works.  Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer.  It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.

  Should I uninstall MS Mouse and keyboard Center?  I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...)  It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...

  Thanks for any help,
  A.J.

  Hello

  What is the number and the model of the computer?

  I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:

  Method 1:

  Step 1:

  Update driver mouse

  a. click on start.

  b. click on Panel.

  c. using the drop down next to the opinion of: in the upper right, select large icons.

  d. click on mouse.

  e. click on hardware tab, click the Properties button.

  f. click on the driver tab, click set to update driver.

  Step 2:

  Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Method 2:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  I hope that helps!

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.

• Canvio Basic 2 TB suddenly stopped working after Xbox update?

  While to say that the title of the hard drive has stopped working once an update has taken place on the Xbox one a few days ago.

  Now I tried it on a different Xbox one (didn't read), and also tried on a computer laptop windows 10 has yet no chance, at first he tried to install it but only got up then stopped, but even after having passed, still nothing, now its there if I go to device management (depending on whether its fine) but I can not even open the hard drive itself.

  I've had it for about 6 months maybe a little more, but still is it safe, placed just behind the xbox connected, never needed to move it.

  I hope someone can help or suggest something, but im now puzzled.

  Thanks in advance.

  I have the exact same problem mate

• Keyboard does not work after windows update

  The keyboard of my laptop S series suddenly stopped working after that she completed an update of windows. Another strange thing is that the wireless only turns off even when the laptop is turned off. Everything else seems to work fine except for two things.

  First thing I did was to restore the system back to before the update of windows, but nothing has changed. Then I tried to uninstall the keyboard driver then by restarting the computer, after which it automatically reinstalled the driver but the keyboard still did not work.

  Then I "refreshed" system, but nothing has changed then either. And finally, I reset the factory settings and for a little while, the wireless light turns off, but then he came back even if I had not turned on the laptop. (Update: I just changed the laptop and the wireless light disappeared so... If all goes well he will not return as a sign of improvement.) There was no change to the keyboard.

  Additional details on my laptop that may or may not have something to do with the problem:

  It is currently running Windows Pro 8 on a 64 bit system and is less than a year.

  I accidentally spilled tea really diluted on the laptop a month ago, but the laptop was working again fine until windows update a few days ago. There is no significant problem caused by the spill other than a few sticky keys who take off on their overtime and that the sensors of the keyboard backlight no longer works correctly.

  Any advice on what else I might be able to try to try to again take the keyboard in a usable state would be great.

  Hi rhel!

  If the keyboard still does not work while in the BIOS, then it means that you have here a hardware failure, and the only way to solve that is to have the repaired computer. You can visit this page to start the repair process.

  -Tim

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• Visual studio 2005 application stopped working after windows 7 32 bit OS update to service pack 1

  Hi support them.

  I did tutor which is used to record the Windows Application to the learning process. It is a 32-bit application that works fine in Windows XP and Windows 7 32 bit OS operating system. But after the upgrade of Windows 7 Service Pack 1, it doesn't now. When we try to record something, it's giving the guardian has stopped working and program disappears.
  Any product from Guardian:
  1. it is a Visual Studio 2005 application.
  2. in execution of tutor, turn us the key to register PEHOOK.
  3. some of the DLLs we use are: Interop * and other user defined dlls.
  4. it can be used to record any application Windows 32 bit OS.
  When searching I got a solution in the forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/application-has-stopped-working-error-on-Windows7/82b6fbcd-ABA7-49e5-833d-51ce42e6ef42
  But after installing it too, the problem exists.
  Could you please help me solve this?
  Thank you very much in advance.
  Best regards
  Manu.

  Hello Manu,

  Thanks for the updates.

  Since then, enforcement, guardian, uses Visual Basic, please post this question in the Forums of Visual Studio for assistance.

  If you have any other questions about Windows operating systems, please get back to us.