LabVIEW with version control

Similar Questions

• What is included when generating with version control on?

  When you use the source control, it is possible to generate a presentation of unique source for an "older version"? For example I wrote documentation for a version of our product that must be released in a few days, but I don't want to not generate it in case of last minute changes. In the meantime, I want to continue to work on things for the next release. Is this possible? Or do what I have until I generate appear?
  I use RH5 right now, but it can be upgraded if necessary.

  Hi codesharing.

  RoboHelp will generate output files that residents on your pc at the moment. At the time of the generation, HR does not check if the files are up-to-date or not; This happens when you open the project, not when you generate.

  Where you're sitting right now, I'd be suspicious of continuous development that you want included in your immediate release. I consider two options to deal with this:
  1. Add your new hardware, but apply tags to build it so that it is excluded from your version. You can remove the tags to build later.
  2. in the alternative, to clone the project source files that are on your pc now. Keep a copy in a safe place like a copy of archive for your release. (It's probably a good idea in any case.) Place another copy in a new directory, and remove the control code source as follows:
  a. delete the following files from the root of the project: mssccprj.scc, projectname.cpd, pblsvrs.sss and projectname.pss.
  b. using Notepad, open projectname.xpj.
  c. remove all entries between and , but let the two tags.
  d. close Notepad, and then save the xpj file.
  You now have a project that is removed from the source control. You can make final changes before your release in this version of the project and build from here. (Please note that these changes must also be added to your 'real' source controlled as well). At the same time, you can continue with new developments in your project under source control.

  Theoretically, you should be able to label different versions of your project in the RSC. However, at this stage of the project, I doubt you want to experiment with it. I would go with one of the two options above.

  I would certainly encourage store this copy archived your project for all milestone version, just for your own protection against the terrible influence of Murphy's law.

  HTH,
  G.

• Assignment card ID when you use Version control

  Hello

  We use RH11 with version control (two of us were allowed to use HR) I am wanting to assign the ID card in our project. I created the card number, but when I assign to a topic, I get the following message.

  "Files in the list below may not be retrieved from version control. Exclusive access to these files is necessary to perform the selected action.
  The file in the list that refers to a the extension .ali

  Is this to say that because there are two of us with HR that can access the project that I can't do this? Or is it because of version control, I can't do this? I really don't understand why? I hope that there is an expert who can enlighten me!

  Thank you, Louise

  There are two reasons that this behavior occurs normally:

  1. The file is extracted by the other author. This occurs when you try to add a new id card at the same time. If the author of other controls throughout the project, you should be fine.
  2. The file is somehow outside the control of source code. In this scenario, your source control link has issues. Try to open the Source code control application to see what is happening.

  You can also try check all of the project, before you add the id of the card. Who help me?

• How to add the large number of RoboHelp docs to SharePoint version control

  I'm on RH11 and some versions of SharePoint, which I'm not sure. I am able to add a document to both HR SharePoint Versioning (file > Version control), but I must have about 49 000 with version control in RoboHelp.  I was able to get the files in SharePoint, but now I have to get RoboHelp to be managing the large number of files.

  How can I get RoboHelp to give version control a large number of documents at a time?

  Are - you're talking about individual files or projects? I guess that the individual, since 49 000 project files can be a bit heavy.

  If you add a project to version control, RoboHelp will add all the files in SharePoint. This will take a little time (set HR to add it before you go out for lunch or before going home). At the end of the day, you can check in the entire project in a single click. Or you see something else?

  You can still manipulate the files .apj of HR to very quickly add loads of files to a project. If you have files in SharePoint, you can update the FPJ files (use the following script: missing subject Fixer). Then remove the CPD and start the project.

• No Version control under the file Menu command

  Version of program:  Adobe RoboHelp 8.0.2 / RoboSource Control 3.1

  Hello!

  I am very experienced with authoring in RoboHelp, but I'm trying to implement the version control for the first time and documentation (PDF version of the manual using Adobe RoboHelp 8, page 29, point 2) says "Choose file > Version Control > add to Version Control.

  I have not found a Version control on the file menu point, even if the menu was fully deployed.

  I found a toolbar icon that seemed to link to the command.

  It is not a big deal, because I could find the icon, but I have other problems with version control (which I will address in a separate post), and I wonder if there is something wrong with my software.  Everyone has the "Version Control" command in the file menu?

  Thank you!

  Andreah

  Hello

  Sometimes it takes to reset a menu. To do this, right click on your menu bar and choose Customize. This should be the tab toolbars at the front. If this is not the case, click it. Then make sure the highlight is on the menu bar. Click on the reset button. Dismiss all dialogs. It shows then?

  Here again, the Source code control is not my cup of witchcraft and I do not use it. So, I've never had a reason to pick up the order. Maybe it's just missing and the docs are wrong.

  See you soon... Rick

  Useful and practical links

  Wish to RoboHelp form/Bug report form

  Begin to learn RoboHelp HTML 7 or 8 days - $24.95!

  Adobe Certified RoboHelp HTML Training

  SorcerStone blog

  RoboHelp EBooks

• I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  I'm a software tester for an internal application to my company. version 10.0.2 is not cmopatible with a few controls within our software. I need the download v9.0.1 whatever works with the controls. Where can I get?

  Well, if you need older versions of firefox you can find them on this site:
  - http://www.oldapps.com/firefox.php

  Best regards, G-Cloud.

• I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for comparability and opening the homepage whenever I starts the browser.

  Windows 7 64 bit
  I want desperately to upgrade Firefox to version 10 of version 9, but whenever I try, I'm stuck with FF10 control addons for compatibility and opening the homepage whenever I starts the browser. I keep having to go back to version 9 to solve this problem.

  Sorry to be a while back! It tried unsuccessfully so this AM, gritted my teeth and deleted the FF programs folder and downloaded and installed FF 10.01. He was still struggling with the same problem. Went in the appdata folder and two files sessionstore.js there. Delete both, restarted the browser and no verification of the compatibility of the modules was done at first upward and the additional tab for welcome to FF was the opening is no longer all seems to work as it should and I did not lose any of my settings... Thanks for trying to help, and I hope that my solution helps someone else who could this experience in the future. Hoping that the next update will smoother!

• With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable.

  With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable, since I do not have rs232 ports. I have two instruments I want for the control in this way. One is a guarantee of strength Imada SPAS with RS232 output. The other is a micrometer Panasonic HL-G103-S-J laser sensor which is RS422. I have done significant programming LabVIEW using GPIB, but I have no experience with devices such as these. No matter what tutorial or examples would be greatly appreciated.

  Thank you.

  When you plug the USB-RS-232 converter, it installs a driver under Windows which makes it look like any other RS-232 port.  You may need to install the driver of everything that came on the CD with the converter.  It will get a Com as Com5 port number according to what is the next available number.

• HR 11 Version Control with Sharepoint do not restrict access to project; Only access section

  Help please. What I am doing wrong?

  We have RH11 and publish webhelp output. A member of the society gave me permission for a sharepoint site so I could implement version control, but we are having all sorts of problems. I'm not a sharepoint user, so I'm fumbling around in the dark. My experience of HR and Doc-To-Help version control is based on the use of a system that someone else has already created for me.

  I thought it would be easy and sold my team on the idea, but now members of the team are overwhelming each other all the time. We do not seem to lock a project so that no one else can edit/replace. We receive messages on a topic where we do not have permission to work on them, but we want the whole of the project should be blocked. Also, another Member of the team keeps opening files on a SharePoint site instead of from their local disk.

  Where detailed information about best practices for setting up and using the HR with SharePoint version control system? Are there options that I need to turn on or off? Are there options on the Sharepoint side, I should turn on or off? I need hand-holding more that I found - thank you!

  If I understand correctly, you want to lock the whole project and want to avoid overwriting one anothers changes, right?

  To block the project, click 'Check out all' on the Collaboration tab in the Ribbon. This will check out the entire project exclusively for you. So no one can make any changes.

  To overwrite the changes, this probably occurs because the authors exceeded versions on their desktop. The simplest way around this (particularly effective as you will check the entire project) is by definition 2 options:

  1. In the options under Version control, check the option always get the latest version of a project before opening. That way, whenever you open a project, you will always have the latest version and won't overwrite one anothers content.
  2. In options, select "Clear DTCS before opening project" to ensure that you'll nave have old stuff in your local cache.

• Integrate SQL Developer with IBM's Clearcase Version control

  Hello

  I explored the part of version control for SQL code by incorporating my SQL with Clearcase from IBM Developer. So far I have not been successful with it, I managed to remove the SVN Version control options, but I am not able to use it for my Clearcase link. Could I know please if there is any plugin available from Oracle for this to do. If it please help & drop your suggestions.

  
  Thank you

  Michael ([email protected])

  Hi Julien,

  There is ClearCase comes available for JDeveloper extension versions, and as any given SQL Developer release some releases JDeveloper, you may be able to find an appropriate version of the extension for your use case.  Looking for ClearCase in the center of update JDev:
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/131167.XML

  Of course, ClearCase is Nolisted in the release notes for SQL Developer as a supported Version control system:

  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/sqldev-releasenotes-v4-1925251.html

  If you want to give it a go, however, here's what I did to install a ClearCase plug-in for my 4.0.1 Developer SQL...

  1. check the SQL Developer Help > about > Extensions for the version of oracle.jdeveloper.vcs (12.1.3.2.41.140207.1351)

  2 downloaded vcs - clearcase_bundle.zip (12.1.2.0.40.66.68 is the closest available JDev version)

  3. in the zip file, modify or replace the value of the property maxVersion in the META file - INF\bundle.xml (from 12.1.2.0.40.66.68 to 12.1.3.2.42.99.99)

  4. install the zip: Tools > features... > Check for Updates (top-right) > install from a Local (radio button) file...

  5. now, ClearCase will be available from the main tool bar: team > ClearCase

  I don't have a ClearCase installed on my machine, so that's as far as I could go.  I hope that you will still make progress.

  Kind regards
  Gary

  SQL development team

• Integration with SharePoint and version control

  We have SharePoint 2013 and that you upgrade to Acrobat Pro DC. I see all kinds of commercials on a better integration of SharePoint, but does that mean, exactly? I also see text of presentation on Version control. Can we now use version control in document libraries in SharePoint to a PDF file?

  How Acrobat DC works differently in SharePoint that Acrobat X?

  Thanks for your help!

  Hello

  Version control is characteristic of the SharePoint document library, if it is enabled in so you can have the version control for any type of word or pdf file. MS office documents can be easily editable in the browser and can create a new version while you can't edit PDFs, but in 2013 of SharePoint, you can view a PDF file in browsers.

  Whenever you download a pdf with the same file, document library will create a new version for it.

  Let me know whether or not your question is disabled.

  Thank you

  Adnan

  URL: MSTechTalk.com

• How to use the version control (CVS) with JDev10.1.3

  Hello
  
  I tried Googling on how to use CVS of JDEV10.1.3 to maitain source and version control. Did not find anything. Help, please...
  
  Thank you

  http://www.Oracle.com/technology/products/jdev/Viewlets/1013/cvs_viewlet_swf.html
  The online help in JDeveloper will have more information for you.
  Also a google for CVS JDeveloper come to this for example:
  http://www.idevelopment.info/data/programming/change_management/jdeveloper9i_source_control/PROGRAMMING_Creating_a_CVS_Module_and_JDeveloper9i_Workspace.shtml

• The best software of version control

  Hello

  It is an open question.

  Could you suggest me a decent software to version control that I can integrate with TS and LabVIEW?

  What do you use?

  Hello

  Here at OR we tend to use Perforce , although there are many other options. Knowledge base below can give a few ideas, but also the discussion of Large LabVIEW Application development community.

  Including third-party Source control providers can use with LabVIEW 8.0 and later versions?

  What Source Code Control do you use?

  Concerning

  Rich

  NEITHER | UK

• How do I run the exe of labview with command line

  I would like to launch an exe of labview with a command line.

  I would like to get advice how to launch the exe of Labview with give values to the control settings?

  You can view the example where x, there are controls

  There is a more detailed guide here, I reference below:

  1. first of all, you can enable it in settings:

  1. open the properties for a version of the application specification

  2. navigate to the Advanced category

  3. check the pass all arguments on-demand command line

  To pass the arguments to command line to request and access in your code follow the same steps as for LabVIEW 7.x.

• QVCS for version control

  Anyone using with LabView QVCS integrated source control utilities? QVCS supports the SCC API and I have set up as my default version control tool, but whenever I try to set it up in LabView (8.6 or 09) I get an error complainig that the specified path is not valid.

  Thanks for the comments. It turns out that QVCS v 3.7 and versions prior work with the integration of LabView. All other subsequent versions are not. I still understand what is the reasoning but I don't want to communicate with Quma and ask for explanations. I found a way to encourage the implementation using QVCS v 3.7 and then replace the old version for Labview 3.9. Here are the steps to follow:

  (1) install QVCS 3.7 but do not set up a project.

  (2) under Admin-> IDE integration, set QVCS as your default version control tool.

  (3) in LabView, go to tools-> of Source code control-> configure source control. and QVCS as provider configuration.

  (4) close to Labview and QVCS. Remove all QVCS 3.7 files from the program files directory. Replace the files with QVCS 3.9 or later.

  (5) restart Labview. The files will check in/out at the most recent help QVCS.

  I had 0 problems with this method until now. LabView problems seem to be not associated with installation of QVCS and not execution.