lack of 3g after system update
Hello :-)
That's the problem with Xperia E double
A few days ago I updated the system to the 4.1.1 version (build 11.3.A.1.39).
Unfortunatelly after update I discovered this smartphone works with 3G. On the screen, I have only the icon 'E '. Before the update there was generally "H". Of course, now, the transfer is slower that before and of course, I'm not happy about that.
I'm trying to solve this problem - choose from the list of the menu of the available provider and... There are only 2 G nets. Because I work always in the same place in life and the problem occurred after the update, I'm sure she is tightly bound.
Is there any solution for this?
Another problem is trying to call. After the system update in general twice a day, I have to restart the smartphone because it's totally hooked. No one can connect with me and I can't call anyone. Smartphone looks normally and does no siglan that something is wrong. But when I try to connect me to someone I have Royal the number and... There's no signal at all. After a few seconds, phone go back to the main menu. Also, there is no record of this test of connection in the list of the connections made. It's a very uncomfortable situation.
Of course, there are also some advantages with the system update, but the problems mentioned above are really annoing.
Do you have any solutions for this?
Thanks in advance.
Rafal
You put your phone on WCDMA/GSM? Settings > more > mobile networks > network mode.
Please note that you can set the preferred network for SIM 1 mode. SIM 2 only works with GSM.
Tags: Sony Software
Similar Questions
-
Inspiron 3000 series with Ubuntu LTS 14.04 - Kernel panic after system update
Does anyone have a solution to the panic of the kernel at startup after an update of the system? The only 'solution' is to choose a previous version of the kernel in grub or reinstall the system from scratch. Frustrating.
Apparently I'm not the only one with this problem.
Thank you
The best way to solve the problem is to upgrade to 14.04.2 or 14.04.3 - it worked for me
sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid
This updates the kernel to 3.16 series (14.04.2) or 3.19 series (14.04.3) Good luck -
No. SD Card after system update
Last week there was an update of Android on my HP Slate 7 system. Since it is not the external SD card, which previously worked perfectly as my music store.
What can I do?
Hi!, HPSlate728000:
Welcome to Forum!
Do not worry!. Be happy!.
Please, visit this link... http://h30434.www3.HP.com/T5/Android-tablets-e-g-HP-slate-7/fix-for-the-slate-7-28xx-46XX-SD-card-issue-after-OTA/TD-p/5171080
-
Can't connect to wireless 5 GHz Lenovo W510 after system update
A system of recently updated with the following changes
- Power manager driver v1.65.05.21
- Intel chipset SAupport for Windows XP/vista/7 v9.3.0.1020
- ThinkVantage Fingerprint software for Windows 7 64-bit v5.9.7.7226
- WiFi driver for Intel for Windows 64-bit v15.02.0000.1258 cards
After that I can not connect to my 5 GHz wireless network more. In the connection manager, 5 GHz networks are no longer visible.
Any thoughts?
Enter the matrix of driver and download and install 5.93
-
HP Envy 17 built-in screen went black after system updates.
Hello!
Earlier today, after updates monthly to Win 7 Home Prem (64 bit, Engl.) I had the problem with the display of colors with my HP Envy 17. It turns out that caused Windows Silverlight (?) to indicate only a few 256 colors (?). So I plugged another screen (Samsung 22 inch SyncMaster) as external monitor to the computer. This worked OK. So, I removed the updates of windows outside one by one, starting system after each file. After the removal of Silverlight, the built-in screen returned to original resolution and colors (1910 * 1080, 60 Hz, 32-bit). Then I reinstalled all the other updates and started the system. So far, I was happy. The original problem has been resolved.
Then, I checked the status of HP Support Assistant. He suggested the update of the program itself and some 5 other updates. I've updated the HP Support Assistant first. That went well, I guess. After the system start, I checked the other updates the new version of HP Support Assistant suggested. This includes for example. update the BIOS and 4 other updates. After download and installation of these, system startup has produced, triggered by the update. OK to start the system, and Windows started a little. But then the screen integrated (HP laptop) do not continue to see the picture more, external only display gave the image. I used the double at this stage display mode. -Only when you start Windows in safe mode, the screen seems to work, but with a limited resolution and properties.
I tried to change display modes (dual Extended display, disconnect, projector only), but the screen does not appear. Or, if we turn off the lights (black room), one can imagine to be able to see a light screen Veery also (built-in display) - so some photos also forms in this case (the built-in screen of HP Envy 17). Remove the external display and the system startup without it does not help.
Please help me and teach how to bring back the computer screen in life!
BR, Alfa68
Hello.
Just letting you know that the screen of my HP Envy 17 2050ea now works fine! What helped was a call to the local HP support; Today, I managed to pass through. He suggested to delete the display driver that I did in Safe Mode, as the built-in screen still worked. I've done the following:
* I started the system using Windows Mode safe mode with networking (press F8 to get there after startup)
* The I went to the Device Manager (you can use the start search to find)
* There, I chose the graphics cards. With the right button of your mouse, I have selected to uninstall the display Radeon (TM) driver. In my case it was Radeon (TM) HD 6850 M.
* After the driver has been uninstalled, I started the system. System booted normally (complete Windows).
* Now the display settings were a little strange, but the screen has worked
* After a minute or two, automatic update of the display driver has occurred. System infomed me to this topic. Then I rebooted, to allow the driver to use.
* After reboot my screen was back to normal, as it was before the problem.
Summary: The problem has been resolved through resettlement of the display driver. Fortunately, heavy recovery or reinstallation of the entire system was not necessary.
WKR, Alfa68
-
800 b 0100 Windows Update error even after system update readiness tool
The last time I tried to install updates, an update installs with update error 800b0100. I have downloaded and run the system tool in the proposed aid system but I still get the same error. I use 32 bit Windows Vista Home Premium Service Pack 2 on a dual-boot Apple iMac. What should I do now?
Hi Michael,
1 update you are trying to install?
2. have you tried to install the update manually?
Method 1:
You can run scanning of the file system [SFC] checker on the computer which will replace missing or corrupt files & try to install the stand-alone update package.
For more information, you can consult the following link.
Method 2:
After you run the analysis, you can try to download and install the standalone update package.
a. to download updates from the Microsoft Download Center
b. Enter the item number in the field search and download the same.
c. double-click on the downloaded file.
d. click on run and follow the wizard to install it.
Hope this information is useful.
-
Windows 7 is more authentic after system update...
Hi guys & gals,
I see this problem has been posted to many, but I saw that each case may be different and deserves so its own post...
Recent Background
I just install minor updates of system for Windows 7 Home Premium and restart, it seems that my copy of Windows appear more authentic.The last few months
About 6 weeks ago, I replaced the hard drive of my laptop with an SSD alternative. As my laptop came with Windows pre-installed, but did not contain a Windows installation disc, I tried to clone the content of the hard drive. It did not work so I downloaded Windows 7 from the Microsoft site and some software to find the key in my system. I used this key to activate Windows and everything worked without problem until today.Any help would be greatly appreciated.
Kind regards
SamEDIT - Here is the output of the tool of diagnosis of Microsoft.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0x0
Windows product key: *-* - 73CQT - WMF7J-3Q6C9
Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
Windows product ID: 00359-OEM-8992687-00010
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {73DECFBA-60B2-4D67-AD4D-9F5B2C9976C1} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.120830 - 0333
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{73DECFBA-60B2-4D67-AD4D-9F5B2C9976C1} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-3Q6C9 00359-OEM-8992687-00010 2 S-1-5-21-160700763-823014696-3111187809 Hewlett-Packard Compaq Presario CQ71 Notebook PC Hewlett-Packard F.23 20101221000000.000000 + 00014203B07018400F8 0809 0409 GMT Standard Time(GMT+00:00) 0 3 HPQOEM SLIC-MPC 100 100 12 64BC76978749586 GW6PzcEVEDTVKeO5Ym5UUm41dBk = Microsoft Office Enterprise 2007 89388-707-0441865-6513214 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800010-02-2057-7601.0000-3222012
Installation ID: 002141165945531935072590212685587150365845661983617290
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 3Q6C9
License status: Notification
Notification reason: 0xC004F063.
Remaining Windows rearm count: 3
Trust time: 17/11/2012-21:39:25Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 10:30:2012 19:50
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current Hash HWID: NgAAAAIAAgABAAIAAQACAAAAAgABAAEAeqjcwjqqFT96fxI32njix + ALd / Z + H9RfXLcQDkbKActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-MPC
HPQOEM FACP SLIC-MPC
HPQOEM HPET SLIC-MPC
START HPQOEM SLIC-MPC
MCFG HPQOEM SLIC-MPC
ASF! HPQOEM SLIC-MPC
SLIC SLIC-MPC HPQOEM
SSDT PmRef CpuPmNotification reason: 0xC004F063.
for some reason, your computer is not properly communicate with it's slictable.change your product key to the one on your COA.Click Start, type slui 3, press on enterAdditional information:
Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:
OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)
COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)
-
USB mouse stopped working after system update
I'm running Windows 8 here and it updates automatic system has run and disabled use my connected USB mouse (manufacturer: Targus | model: AMU4201EUK)
When I search the drivers in Device Manager tells me I'm using the latest drivers available and can't seem to find a driver for this specific mouse online.
I use an external keyboard connected via USB and works without problem so I'm lost as to why the mouse would stop working. He able to go to the mouse as the LED inside turns on when it is plugged. Windows made his usual sounds when its connected and disconnected from.
This happened last week and to work around, I restored windows since the eve of the update and it worked without problem. Windows tries to install the updates again after a few days, then the mouse will become unusable. I've lost the ability to return to this State, now I'm sure that Windows has replaced something in this update.
The mouse uses of Microsofts HID drivers that are up to date and I confirmed the mouse works on other systems and on my laptop USB ports are functioning normally.
Any suggestion is appreciated.
See this similar post semi for some additional options open to you.
After update, windows 8 pro will not be closed or sleep with connect to internet
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/after-update-Windows-8-Pro-wont-shut-down-or-sleep/24bdbd5a-AEEE-4ADB-B470-7ef5685acb99Have you had a look in Device Manager for errors with USB devices?
Use the Device Manager and uninstall the concentrators root USB and devices which show now on your machine. Restart and let XP rediscover and see if that solves your problem.
If you uninstall the mouse in Device Manager, then reboot, Windows should find the mouse and install the appropriate drivers.
Uninstall or reinstall a device
http://TechNet.Microsoft.com/en-us/library/cc725782.aspx -
I saw the first time this question after automatic ubuntu updated about 2 weeks - Zorine Linux.
So yesterday, I built a new Linux MINT. Went straight to sverigesradio.se and when I clicked on the image of radio at the bottom of the page, the link to CHARLES IN, it worked OK - it was offending him. Example ASPX I have problems with on the other pc.
Then the PC has received 243 automatic updates and today, I have the same problem as the PC Zorin.
When I try to open an ASPX link I wonder what application can use.
I am the only one in the world with this problem?
No problem with Chrome.
Thank you
MauriceUsing Web Matrix Beta 2 under Wine?
Try the User Agent Switcher extension, as some Web sites don't want to recognize channels useragent for Linux Firefox also installs.
-
How to delete contacts on my iPhone double 5 after system update?
How can I remove duplicate contacts from the iPhone to my and my husband 5 after update to version 9.21?
If you synchronize your Contacts via iCloud, the best way to remove duplicates is via the Contacts on your Mac application. The Contacts open, then under the map in the main menu option, select "Look for duplicates. Allows you to remove them quickly, and they must push the info updated for your devices. If she does not push it back, then on your device, go to settings > iCloud and turn off the Contacts and then turn on again.
I found that my Mac showed a duplicate of almost all contacts, I had. Once I did the above, they are all cleared up.
See you soon,.
GB
-
Table of RAID5 degraded after system updates
I have a D20, I did a 'fresh install' W7 on a RAID5 array I have set up in the bios (ctrl + m). Now that the system has updated, restart the bios says "degraded" table. Entry (ctrl + m) shows a drive's "rescue", second disk as 'free' and two other "assigned." (It is a RAID5 with four discs). I can't locate instructions to access the MRU. Lenovo solution center the table is 'good '. When installing, I put the first HDD as "backup" and the other three as "affected". Why updates fall (or release) one of the disks? How do I enter MRU? (MRU is the last installed version of Lenovo source.) Suggestions?
Interesting. It must have only deflated the package and does not not through an installer to put in your Program Files directory.
Glad that worked for you. Let us know if you need assistance with your table. I hope that all rebuilt without problem.
-
Satellite P200 - 1FC: no sound after system update
Yesterday my laptop did an update of the system for Windows and when I restarted the computer, my speakers did not work, my ATI graphics card was not found and that the reader has stopped working.
I don't know what happened, but I don't think that the update installed correctly.
I had a similar problem on my old laptop with XP and I due simpy reinstalling the update.For some reason I can't do this on my current.
I use a SATELLITE P200 - 1FC.
Is now SP1 for Vista installed?
I ask this question because I got message on Vista updates and SP1 was who listed there. I'm afraid, it can have a negative influence on the good OS and I'm quite skeptical about it. For now, Toshiba does not support Vista with SP1.
-
Help with e-mail setting blackBerry Smartphones after system update
I did an update on my phone last night and he deleted my email account. When I return to reactivate my account, it asks for my password but will not activate. How can I reactivate the e-mail account?
Please try this, using your BlackBerry browser...
- Go to mobile.blackberry.com
- Scroll down to Communication and e-mail.
- Choose the appropriate email, configure the options.
It works for you?
-
Invoke VMScript fails after system updates.
I've updated my vsphere 4.0 to 4.1, tools, my powershell Toolkit, and I noticed that now I can't invoke the script. Everything has been updated.
Now, I have a few scripts using Invoke-VMScript this error the same on all installed them PowerCLI, if I type in this command (the virtual machine IS running for sure and tools are running and vsphere client shows his power and all good):
$vm = get - VM myVM
Root of HostUser - invoke-VMScript - VM $vm ScriptText-"dir" HostPassword - Director of CorrectRootPass - GuestUser - GuestPassword CorrectGuestPass
I get this error:
Invoke-VMScript: 01/02/2011-13:22:50 Invoke-VMScript 197B3453-9367-4270-26CF-88A793C3B284 during operation 'wait to connect to the VMware tools on VM hosts' myVM "the following error occurred:"the virtual machine must be powered.
On line: 1 char: 16
+ Call VMScript < < < < root VM - $vm - ScriptText "dir" HostUser - HostPassword - CorrectRootPass - GuestUser - GuestPassword CorrectGuestPass administrator
+ CategoryInfo: OperationStopped: (:)) [invoking-VMScript], VimException)
+ FullyQualifiedErrorId: Client20_VmGuestServiceImpl_VixWaitForJob_VixError, VMware.VimAutomation.Commands.InvokeVmScriptI have a couple of different clients, that I run the box tool and they both fail with the exact and same error no matter which command is executed.
If I echo $vm, he also says that the virtual machine is running as well.
A VIX upgrade so that you have installed the new version of PowerCLI on clients?
You should see 1.10.0.12331 with PowerCLI 4.1U1 VIX.
-
T560 keyboard and mouse no longer works after the Lenovo system update
Hi all
ThinkPad T560, W7 64 bit.
I volunteered software Lenovo (I forget which) do the system update.
I did, it installed and claimed restart.
After restarting, the mouse and keyboard not responding. Tried the mouse USB and keyboard, no difference.
Tried to recover from a backup - no luck.
Tried to put in the dock - no luck.
Any ideas?
Alex
SOLUTION - had to remove McAfee antivirus using "McAfee Removal toll"!
Common uninstall through Control Panel / Add Remove & Programs problem
After his withdrawal with the tool, all good.
Shame Lenovo and McAfee have allowed this question coming in first place.
Maybe you are looking for
-
Firefox and Thunderbird are suddenly not accept keyboard input
Keyboard shortcuts, simply enter in any field of work continues to fail so I can still use ctrl + C / CTRL + V to somewhat use firefox and Thunderbird, but all fields are completely insensitive to the entries to the keyboard The problem occurred sudd
-
Is it possible to extend the internal storage of 5400 RPM 2000 to SSD HHD internally for iMac 4 k?
-
How do you get the top left corner, orange to appear button
Some how I lost the orange button with Mozilla Firefox printed inside of the it in the upper left corner. I think I have tried everything I know how to get it back without success. Need help.
-
How to create a Firefox 3 profile from the command line?
I would like to create a new profile on a FreeBSD 7.2 - amd64 machine using Firefox 3.5 under the CONSOLE. When I type: Firefox3 - CreateProfile "foobar".Error: no display specified No there is NO way to create a profile without having a viable displ
-
Re: Deskjet 3070 - replaced the cartridges but does not now print!
I have the same problem with my printer Officejet 6700 Premium. I just replaced all the cartridges with HP new ones. The printer is now going through the motions but does not print blank pages. This happens for all what I am trying to print including