"Lack of function external lvanlys.dll ' when executing EXE

Similar Questions

• Lack of function external nivissvc

  Hello

  Could you help me solve this error message?

  

  This error occurred when I run my application. The exe and the installer is created with LV and the RTE of LV + Vision RTE is also attached to the installer.

  Sorry for the duplicate,

  I tried searching for my previous post but it did not...

  The problem is resolved,

  Platform: Win764Bit,

  All updates must be installed to the BONE and the error gone!

• Error when executing the function ocx

  Hello

  When I trty to perform functions ocx (which work when she is called to do not use LV) then I get error popup attached.

  Fatal internal error 2832 oleautomgr.cpp line

  What cani do to make it work?

  With the help of LV 8.5

  Thx for any help

  His works now. The problem was recorded inside the ocx or OCX not correct.

  But thanks for the info.

• Interopterability: Call PeakD in lvanlys.dll

  Hello

  So I've been trying and trying to get the two different parts of my project to work together and now it is call a LabVIEW Analysis feature (namely, PeakD) in a C/C++ executable. I made sure to include all of the necessary header files in the resources folder and set all the structures, in addition to playback on the TD1/TD2 data types and the prototype header, but I cannot yet understand what I am doing wrong! Here is the code I wrote:

  // PeakD.cpp : Defines the entry point for the console application.//#include "stdafx.h"#include  #include  #include "extcode.h"/* Typedefs */typedef struct {    long dimSize;   double elt[1];} TD2;typedef TD2 **TD2Hdl;typedef struct {   TD2Hdl Input_Array; double Threshold;   long Width; unsigned long PeaksValleys; TD2Hdl Peak_Locations;  TD2Hdl Peak_Amplitudes; TD2Hdl Peak_Second_Derivatives; long elt8;  long elt9;} TD1;typedef struct {    long Span;  long Index; long NHistoryPts;   long Len;   long PrevSign;  long unused;    unsigned long RinvQtPointer;    unsigned long FitBufferPointer; unsigned long HistoryPointer;   unsigned long PrevCoeffPointer; unsigned long DataPointer;  unsigned long slackForRinvQt;   unsigned long slackForFitBuffer;    unsigned long slackForHistory;  unsigned long slackForPrevCoeff;    unsigned long slackForData;} TD3;/* Prototypes */typedef void (*MYPROC)(TD1 *PeakApp, TD3 *pPEAKINT, TD2Hdl *SavedData, long *pErr);void _tmain(int argc, _TCHAR* argv[]){  // File: RUNTIME.C  // Sample code that uses LoadLibrary and GetProcAddress to access myFunction from MYDLL.DLL.    // You will need to include stdio.h and windows.h in your project to use this code  HINSTANCE hinstLib;     MYPROC ProcAdd;     BOOL fFreeResult, fRunTimeLinkSuccess = FALSE;  // Get a handle to the DLL module.  hinstLib = LoadLibrary(_T("lvanlys"));  // Function inputs.     TD1 *PeakApp = 0;   TD3 *pPEAKINT = 0;  TD2Hdl *SavedData = 0;  long *pErr = 0;     PeakApp = new TD1;  pPEAKINT = new TD3; SavedData = new TD2Hdl; pErr = new long;    PeakApp->Input_Array[0]->dimSize = 1; PeakApp->Input_Array[0]->elt[0] = 1;  PeakApp->Threshold = 10; // Between 0 and 60 PeakApp->Width = 10; // 0 is Peaks, 1 is Valleys PeakApp->PeaksValleys = 0;   // Process the beginning of data    PeakApp->elt8 = 1;       // Process the end of data  PeakApp->elt9 = 1;   // If the handle is valid, try to get the function address.     if (hinstLib != NULL)   {       ProcAdd = (MYPROC) GetProcAddress(hinstLib, "PeakD");       // If the function address is valid, call the function.         if (fRunTimeLinkSuccess = (ProcAdd != NULL))            //(ProcAdd) ("message via DLL function\n");         (ProcAdd) (PeakApp, pPEAKINT, SavedData, pErr);     // Free the DLL module      fFreeResult = FreeLibrary(hinstLib);    }   // If unable to call the DLL function, use an alternative   if (! fRunTimeLinkSuccess)      printf("message via alternative method\n"); }
  

  I'm supposed to pass pointers (or more precisely, handles) for the ' data objects OR ' who have a long indicating the size (dim_size) and the rest of the elements (in ELTs]). LabVIEW 8 shows the prototype of the function and pointers necessary as being:

  typedef long (* MYPROC) (void * PeakApp, void * pPEAKINT, Array1DDouble * SavedData, long * pErr);

  Does this mean I have to manually go my pointer based on integers in a (void *) when you enter MYPROC (PeakD)? This has not worked for me so far, so I guess the problem lies with my data structures. in any case, I would appreciate your help on this, thanks.

  ~ Ali

  The PeakD function is called by the Detector.vi Ridge and there is a description of the algorithm in the function.

  Because you must have LabVIEW in order to have the lvanlys.dll, it would be simple enough to make a dll of the LabVIEW VI himself.

• What is the right method to access the functions in a DLL compiled with a target of THIS (Arm)?

  I tried without success to access functions in a DLL that is meant for Windows CE.  My Labview application objective is a touchscreen the arm-based device.

  All, thank you very much for all your help.  I was still unable to find a method that did not produce an error when compiling... calls for a vi or a C file to be included.  (ex: [feature] is a missing file vi or C).  I also tried including the import library for the DLL, as shown above in the email from Paul, but I still received the same error.  This has been a problem for me, while testing with Win32 non-targets... in this case a device of THIS 5.0 touch screen based on the arm.

  However, I found a solution feasible and quite simple:

  Instead of trying to register the import library DLL as a file depending on the vi, I changed to build a DLL (and associated import lib) to build a static library (.lib) and included while .lib file as a dependent in the build specification.  This had the effect of linking statically, object code rather than wait for the vi compiler to compile the C source code or link a DLL import for a non-Win32 target library.  It is also not necessary to include an additional step in the installation of the DLL on the target device.  The library, I created is just a simple interface to another DLL already on the target device, which had struggled to interface directly to Labview.  Given that it is only a role of simple interface, this solution of library static woked well because it was not essential to have its available as a separately scalable DLL functions.

• problem with Transition vi measures lvanlys.dll

  I use this 'measure of Transition vi' for a while and had no problems. But now, I suddenly feel that the question of the present vi, transitional measure, gives me an error of-20310. I am assured that these inputs than vi, wfm in and dt, having entered correct. The problem occurred when the vi called for this dll, lvanlys.dll. Here's what I found;

  • "lvanlys.dll" is located in c:\Program NIUninstaller Instruments\LabVIEW 2009\resource, and that it points to the right path in vi (Yes, I'm using LabVIEW 2009)
  • interesting thing is that when I find this dll using the research of a window, he could not find the dll in this path, instead he sought that I used in a different project in the different path (once again, for this project I'm pointing to the right path of the dll - C:\Program NIUninstaller inst...)
  • I tried to change the path of this dll and pointing to this path of vi, but WITHOUT success and gave the same problem
  • I don't think it's the problem DLL loading, I was able to do this by using different path where the dll (at least I do not see complaints of LabVIEW)

  What I'm missing here? I appreciate for all your help.

  'Wavefrm Graph 2' is only for my purpose of troubleshooting, and I'm removing it after all done. But I agree with you on that.

  I ended up re - install LabVIEW and the problem disappeared. I always am furstrated the fact that I still don't know what went wrong and the root cause of the problem has been, and how this re - install the LabVIEW has solved the problem. However, I appreciate your help indeed.

• Windows ME error after installing an Ethernet network card: "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE ".

  I installed 32-bit network card Ethernet 10/100mbps in a tower of E which has Windows Millennium Edition.  When I tried to run the C/D that came with it I got the message, "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE' in the network configuration panel it lists the network adapter as a TCP/IP Protocol, but could not get on the internet. In the past, the only way this computer connected to the internet was through a dial-up access. Any help would be greatly appreciated.

  original title: problem of setting up a network of maps by ME

  Hello

  Windows ME (Windows Millennium Edition) is a Microsoft product.

  There is more support available for Windows Millennium Edition.

  
  Reference: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

• Core of CBWMS JavaScript error: "when executing translateCustomControl in ExternalRenderers.htm...". »

  Since the October release upgrade I get this dozens of times a day error. It seems to happen when changing window that is developed to another program, while in the middle of saving a file in DW. There is a JavaScript error IN the code base of Dreamweaver, it has nothing to do with any file that I am trying to change, sometimes little any type of file, I work in and/or save.

  Here is the error message: "when executing translateCustomControl in ExternalRenderers.htm, a JavaScript error occurred." It is not always the translateCustomControl function, but it is always in the file ExternalRenderers.htm.

  I use Dreamweaver CC 2014 on Windows 8.1

  Any help is appreciated... Thank you!

  I remember well, it is a bug, and someone mentioned previously.

  If I were you, I would like to send a bug report to:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&loc=en

• When executing inspectSelection in cf_select.htm, a Javascript error occurred.

  I get this error delayed 3 times in a row when I put in a cfselect box.

  When executing inspectSelection in cf_select.htm, a Javascript error occurred.

  It makes me click on 'OK' 3 times before continuing, so it appears each time I have to make a change to the page.

  What is going on?

  That's what fixed it for me.

  c:\Program files\adobe\dreamweaver CS5\configurations\inspectors\cf_select.js

  Went to the line 231 canInspectSelection() function.  Changed to return (false);  instead of true.

  Something to do with the property inspectors.

  http://help.Adobe.com/en_US/Dreamweaver/CS/extend/WS5b3ccc516d4fbf351e63e3d117f508c8de-7FF b.html

• Creating external Tables using the EXECUTE IMMEDIATE in PL/SQL

  Hi guys,.
  
  I am trying to create an external Table using the EXECUTE IMMEDIATE in a procedure and I managed to compile and no errors were generated. But when I try to run it from sql using the exec command I get the following error:
  
  ------------------------------------------------------------------------
  ERROR on line 5:
  ORA-00911: invalid character
  ORA-06512: at "GEO. TEST_DDL', line 4
  ORA-06512: at line 5
  
  -------------------------------------------------------------------------
  
  I tried to check the whole statement to create the external table, but I can't find where is the error. Surprisingly, if I simply run the command table create external on sqlplus it works, but not a procedure.
  
  If anyone can help with ideas or experience?
  
  Geoffrey Kossami

  The error means that there is an identifier somewhere that starts with a nonalphanumeric. This is a typical mistake of editing. A procedure compiles correctly is not of course because the underlying dynamic sql running is OK. Which of course only be resolved when you try to run it.

  There is certainly a problem with the text you provide to be run as a piece of dynamic sql code. You should try to watch it with dbms_output and run this code in sqlplus. But your problem is with the code you run as dynamic PL/SQL, it is not itself compilable.

  Jack

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• has received the error when executed OR .exe to install software OR wihout PC application

  The error received when it .exe application (with references NOR) is run on a PC.

  So I've changed the property NOR references: local copy-> true

  relating to the compilation, always test it, get error if I use another PC without software OR installed.

  After copy / paste all the dll files required in the directory where .exe is located, it works correctly on the machine without MSudio installed.

  I removed the NationalInstruments.NetworkVariable.dll of my project to simply this process.

  then copy all the dll files based on measure XCOPY deployment files Studio .NET

  You don't have to copy/paste the following files (not 3d)

  msvcp80.dll 8
  MSVCR80.dll 8
  Msvcrt.dll 8

  

• What is lvanlys.dll?

  I have a build that always wants to include lvanlys.dll.

  What he calls? How do iremove it?

  Go to your project and find in the dependencies section. So, try the following:

  • find... appellants
  • Why is - that point in the dependencies section?

  

• Multiple copies of lvanlys.dll is at the origin of the construction problems.

  My project is to use multiple copies of lvanlys.dll.   It is the origin of the generation conflict.  One knows the solution to this?

  Mass we compiled, established libraries of the project packed and removed unused (lower level) code disable structures.  In the end, what helped was last updated of VISION the driver on the target computer.

  More information in this thread

  http://forums.NI.com/T5/LabVIEW/the-full-development-version-of-LabVIEW-is-required-to-fix-the/TD-p/...

  So I'm not sure what exactly to correction of the problem of multiple copy, but I think that just read the code cleaned up helped.  Now we have more multilple copies of lvanlys.dll.

  Thanks for your help.

• Error loading lvanlys.dll

  Hi all

  2 days ago my PC starts to send this message: error loading lvanlys.dll. Inavalid access to memory location. I use winidows 7 and LabView 2010.

  To fix that I do every thing and finally I reinstall windows and labview, but nothing change. I need your advice.

  Thank you.

  Ah. Ok. Hey, I have the same machine!

  It's quite extraordinary material and you should probably mention that.

  There is a bug in the old intel MKL library of known on machines with many cores. Are you really sure it worked before on this same machine with the same version of LabVIEW?

  You should probably update LabVIEW to make it work correctly with 32 virtual cores. This is an old discussion.

  See also my report here. If you disable hyperthreading in the bios, things should work. Would be - that you had it disabled before?