lack of iecont.dll, iecontlc.dll, msencode.dll, ieuinit.inf not available

tryng to find missing files and cannot? Help

Hi mschanda2000,

-When exactly you receive this error message?

-Is to start the computer or while trying to launch a particular application?

As you seem to do face many questions, it would be better that you perform scanning of auditor of file system (CFS) on your computer and check if that helps you at fixing these issues.

SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% system root%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

Tags: Windows

Similar Questions

  • When I turn on my computer, he told me that the program cannot start because ash.dll base is not available in my PC.how I can solve it this issue.

    Thank you for allowing me to ask my question.

    My question is about the message poster on my PC window indicating that the program cannot start because ash.dll base is missing in my PC.

    So how I can solve this issue.

    This program is for AVAST ANTIVIRUS

    Ash.dll is usually associated with an infection.

    Install/run these two free utilities

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    http://www.Malwarebytes.org/products/malwarebytes_free/

    It could also be the case that Avast detected & removed the infection but left a remnent, this being the case closely check the entries in the msconfig Startup tab

  • Error message: iecont.dll and iecontlc.dll are missing?

    Original title: where to go when the file version and iecont.dll iecontlc.dll are absent?

    need to know where to recharge the missing files

    If you research Information System, Internet, Internet Explorer, Versions of the files settings and these folders are listed as not available:

    iecont.dll
    iecontlc.dll
    ieuinit.inf
    MSENCODE.dll

    The files listed as "missing" in your resume generally lack on all systems and have nothing to do with your problem not specified.

    They are part of Outlook Web Access that if you do not, you will not have installed (most people aren't and don't).  They are not yet on the XP installation CD.

    Note to the SUPPORT ENGINEER all THE "experts" hired by Microsoft:

    These files are not covered by the Windows File Protection and run sfc/scannow will not replace the.

    Please know how the auditor system and XP files generally work and stop suggesting your ideas with your links to KB articles that you have not tried yourself to see if they work, don't make sense, don't work, will never work and wasting time.

    If you need to learn how to work the System File Checker and why your ideas are ridiculous, I'll be happy to explain it - once again.

  • lack of PIDOCOB6.dll cannot open the program

    lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

    lack of PIDOCOB6.dll cannot open the program of old software from microsoft for photos

    =========================================
    The article Microsoft Knowledge Base that address the
    Question of PIDOCOB6.dll are no longer available, but I think
    the fix was to uninstall/reinstall Picture It!.

    Also... the error could be related to a printer driver... If you
    recently installed a new printer or your printer driver update
    It is maybe at fault.

    Sorry that's all I have on the subject.

    There is a Picture It! Group on Yahoo Groups... maybe
    could someone offer a few ideas:

    A_Picture_It_Help · Creative with Picture It & SOAK!
    http://tech.groups.Yahoo.com/group/A_Picture_It_Help/

  • Trial version of LR 6.4 crashing on launch. lack of libcef.dll [Please can you help...]

    I just installed the trial version of the RL... However, I get the following error when opening of LR.

    Adobe Photoshop Lightroom has stopped working.

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: lightroom.exe

    Application version: 6.4.0.10

    Application timestamp: 56a2e8ef

    Fault Module name: libcef.dll

    Fault Module Version: 3.1750.1805.0

    Timestamp of Module error: 53eb9d68

    Exception code: c000001d

    Exception offset: 00000000020f5fa3

    The system version: 6.1.7600.2.0.0.256.1

    Locale ID: 1033

    Information additional 1:1849

    More information 2: 1849c65267ce2967d89f315e1c3c4b82

    3 more information: 95b 7

    Additional information 4: 95b7e9ed49fb3657956fc9b27015606a

    Read our privacy statement online:

    http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

    If the online privacy statement is not available, please read our offline privacy statement:

    C:\Windows\system32\en-US\erofflps.txt

    Hi prasad,.

    Installation of Service Pack 1 for Windows and who should pay attention to the issue above.

    Download link: download Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) official Microsoft Download Center

    Let us know if that helps.

    Kind regards

    Mohit

  • run dll error loading C:/users/mike/AppData/Local/uwamocin.dll module could not be found...

    I am running windows vista Home premium. When my screen, I get an error loading c:\Users[user-name]\Music\iTunes\iTunes/mike/AppData/Local/uwamocin.dll module could not be found. My internet explore continues to mess up and running slow, I had other problems too, I think it's related. Is there a way to obtain another dll to replace this lack?

    Hello

    A Google search has nothing on "uwamocin.dll", which suggests that it is associated with Malware.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    If the problem persists after scanning, take these startup entries:

    "How to use MSCONFIG in Windows Vista"

    http://www.netsquirrel.com/Msconfig/msconfig_vista.html

    You can also use this free program to do, too:

    "Autoruns for Windows V11.32"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    See you soon.

  • stop Java download with bin\awt.dll problem, file not found

    bin\awt.dll: old file not found however a file of the same name were found no update because the contents of the file do not match.
    Java update fails to apply the changes to your system.
    Java, set up the error # 1722.
    These are the messages I get when I try to update java.

    If all else fails then I uninstall Java and download it from scratch

    Try to uninstall Java versions installed via the "Control Panel > Add and Remove Programs".

    Install the latest version of Java .

    See also http://raproducts.org/javara.html RaProducts - JavaRa documentation

  • Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

    Original title: how to fix browseui.dll without original windows disc?

    Hello

    Well, kids, here's the deal.

    I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

    There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

    NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

    Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

    I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

    We are this:

    1. is there a way to correct this file without the disc?

    2. can I get another copy of the disk without having to buy it?

    3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

    If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

    If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

    Explorer.exe - bad Image
    The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

    You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

    If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

    You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

    Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

    From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

    Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

    You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

    Explorer.exe

    Click OK to launch the Explorer and your office must return.

    Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

    If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

    Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

    If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

    You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

    Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

  • Tsp1.dll TPMauth.exe not found error

    At the start of my computer (Windows XP SP3) I get an error message TPMauth.exe tsp1.dll not found. I saw an answer for that rack on Windows 7. What is the procedure for XP?

    If this does not work from above you can try to save the dll file by clicking on start > then in the run box type

    RegServ c:\windows\system32\tsp.dll

    Do not know if this will work, but worth a try.

    MyPcHealth - free tools

  • I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

    I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

    Please can you help me?

    Original title: AdvrCntr6.dll

    Hello.

    There is a guide for fixing here:

    http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

  • patch W32.dll DSI is not a valid windows image

    While the upgrade of my Quicken10 I found that an upgrade was necessary so I had downloaded on my computer, but when I try to install the message following application dll C:\documents and settings \all users\application data\int.it\quicken\net\common\patch\update\patch w32.dll poster is not a windows image invalid - please check install floppy what about this and I have not received a disc of Quicken for the upgrade , but a download. Is there a problem with windows?

    While the upgrade of my Quicken10 I found that an upgrade was necessary so I had downloaded on my computer, but when I try to install the message following application dll C:\documents and settings \all users\application data\int.it\quicken\net\common\patch\update\patch w32.dll poster is not a windows image invalid - please check install floppy what about this and I have not received a disc of Quicken for the upgrade , but a download. Is there a problem with windows?

    These errors can often be attributed to malicious software. Therefore, the first step is to make sure that you are not infected. The error can also be caused by incomplete or corrupt download.

    Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. A quick, analysis in quarantine found anything yet.

    You can uninstall Malwarebytes if you wish after the scan. SuperAntispyware is portable and does not install. It will be deleted when you delete temporary files. Post back with the results.

  • "error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module is not found" I'm cluelss and generally ignore this message. Should I try hard or leave?

    Original title: error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module could not be found

    I'm cluelss and generally ignore this message. Should I try hard or leave?

    Thank you

    This link may be a little more useful:

    http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  • Error at startup of Windows 'msseces.exe - bad image. the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image... »

    MSSECES. EXE

    My mini HP netbook 110-1000 has now two screens same when I start, I am running windows xp. When I boot I get a box that says msseces.exe - bad image, it says inside the box of the application or dll program files\ microsoft security client\ sqmapi.dll c:\ is not a valid windows image. Please check this against your installation diskette. the netbook came with a floppy disk. programs are in the partitioned hard disk. the other thing, I noticed that it's my icon for security essentials is missing and I can't uninstall security essentials because it crashes when I try to uninstall, and then he asks me if I want to report to microsoft. e help thank you Gary.

    Hi Gary,.

    It seems that Microsoft Security Essentials has corrupted on your computer. You can uninstall and reinstall the program to check the issue.

    Step 1: Since you are facing problems of removal of the program, you can check the following thread and check if it helps.

    Uninstallation of MSE - Microsoft Answers

    Step 2: To reinstall, refer to the following.

    Virus, spyware & Malware Protection | Microsoft Security Essentials

    See also:

    Checklist for installation of Microsoft Security Essentials - Microsoft Answers

  • Your version of obsolete Microsoft DLL components is not compatible with this version of Windows.

    I ran the report of problems and Solution of control panel and I get an alert saying that ' Your version of obsolete Microsoft DLL components is not compatible with this version of Windows. "Does anyone know what this means and what to do to fix.

    I went to report problems and Solutions, because my PC started crashing about 10-15 minutes after the launch of Windows Media Center. I don't know if these two things are related.

    Any help or advice would be much appreciated.

    Thank you

    Hello PTLUK,

    I suggest you make the SFC scan.

    File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

    b. click on continue or provide administrator credentials if prompted.

    c. in the type in the following command prompt window and press ENTER:

    sfc/scannow

    d. you should see the following message on the screen:

    From the analysis of the system. This process will take time.

    Start of the phase of verification of the scanning system.

    % Of verification complete.

    e. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

    For more information, see the article:

    http://support.Microsoft.com/kb/929833

    Also take a look at the link that talks about the same question below:

    http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/895e0fcb-045b-4166-BFBB-bc302a26820b

    Kind regards

    Savan - Microsoft technical support.

  • ConnAPI.DLL in does not work - how can I reinstall it?

    Frequently, I get a message that ConnAPI.DLL in does not not and I should reinstall I don't know how I lost him and certainly do not know how to install it.   Help!

    ConnAPI.dll error message when you start your computer:
    http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb403011 Carey Frisch

Maybe you are looking for

  • Bing adds on a messed up in Firefox. How can I remove it?

    I received a notice to update 31/01/12 suggesting I have add Bing to my Firefox. I've always been happy with Firefox and frequently recommend it to others. I added Bing as suggested and now Firefox and Bing does NOT RESPOND when I connect. Bing does

  • Convert the string of 32 bits to a hexadecimal number of LV 7

    Hello!! I have a 32 bit string I need to convert a hexadecimal number, what program I can do? Can someone help me? Thank you

  • HP Envy: Mouse scrolling

    I have a HP wireless mouse with my desktop computer. Why the screen scrolls on its own? Sometimes it hits me a website and takes me in my office. It's as if he's possessed. This does not happen everytime I use, but often enough to where it's very fru

  • Business Structure - case specific error

    I'm in my case Structure (T/F) with a line simple mistake... but when I leave the Structure of the case, I want to go the direction that the case sends me.  For example, if my case is true, I want my merry way, luggage in hand until the error line ju

  • Cannot remove the battery? E1 572

    How on Earth to remove the battery of an E1 Aspire 572? I don't see any release on the laptop at all and tried to find a way without success throughout the day. What I saw through the box, before he came, but there is no manual as a guide on how to I