Lack of Mic on FB / others

Similar Questions

• 2558 HP HC MONITOR DRIVERS for THE WEB CAM AND MIC AND the OTHER BUILD IN DEVICES CE WHO IS BUILT IN MS7 IS BAD, AND IT SHOWS the errors of devices

  It takes the right drivers for hp w2558hc monitor, is the web cam and microphone and other devices. Now what a windows MS7 is incorrect and when the pc doc runs it says it devive pilot problesm we tried to remove the drivers, that it doesn't always, the only way to solve this is unplu cable webcam, while the device driver goes.  It was working OK in vista and when hp gave me free ms7 upgrade, when the errors started. I still have the thing he had trouble even on vista because of the blue projection. MICROSOFT and HP has to happen to get together and put the correct drivers MS7 or update the old was the last time, she was last updated 2006.  They sstesm now I have is a 64-bit MS7, we tried everything. It works but it does not just because of the problem of driver and the only way to remedy to the webcam cable monitor unplu when not in service.  It gives you 3 errors and it organizations all the internal features of this monitor as a web cam, mic. any suggestions out there?

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/33d7bcee-b0ed-489b-a15d-c087c421cb55 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XPS 1530 internal mic not working not not with Vista

  XPS 1530 internal mic not working not not with Vista

  Hello ThomasBarnette,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

  Download and install the drivers for the Chipset from the link below and check.

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

  Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Firefox for Android, Adobe Flash Player and Samsung KNOX of conflict.

  Hello.
  I have a Galaxy Note 3. If I go on youtube.com in Firefox, play a video, click on full screen, Firefox will crash and a notification will come with description and title 'prevention information' "a request was forced to stop for an unauthorized attempt to access system... ». This notification is generated by 'Knox Notification Manager', an application that comes pre-installed.

  I know that this problem is probably not exactly lack of Firefox and some other browsers are capable of managing the exact situation even without any problem. You can solve this problem, or is there a configuration I can do to fix this?

  My system info:
  Device: Samsung Galaxy notes 3 (T-Mobile)
  OS: 4.3 Android
  Adobe Flash Player version 11.1.115.81
  Firefox for Android version 26.0.1

  Hi feer56,
  Thank you for your response.

  It is interesting that there is no entry about: page of the accident and it's even more bizarre because I can't recreate the situation more crashing! I made some changes in the settings, maybe it somehow have it fixed...

  Anyway, sorry for that.
  PS: I tried to delete this question, but apparently it's not possible.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Keyboard/mousepad does not on Satellite 1110

  I have an old satellite 1110. It is a dual boot with linux and windows XP machine. The Boot Manager is grub.
  When I let the machine start the OS default without touching the keyboard at the stage of grub, about 70% of the time when the finishing of the machine to start the keyboard and mouse will be non-functional. However if I use the upper and down arrows to grub stage, 100% of the time to keyboard and mouse mat work correctly when the machine finishes booting.

  I'm trying to understand why this would be so. It does not seem to relate to the involved BONE, just the physical manipulation of the keyboard. Is it a bad connection due to lack of chip, bios or other software problem?

  Hello
  Are you sure that the touchpad is enabled?
  Check it by using the Fn + F9 key combination. If this combination does not work, try to find the power button function in Control Panel-> mouse control
  By the way; have you tested If reinstalling the touchpad driver could help solve this problem?

• Equium L20 - low microphone volume level

  Hey all, lately it has really been buggin me, I can't work it out.
  I have a high-end headphones for my computer now, problem seems to be with this laptop, the sound is ok, but the micro is far from weak.

  I looked into each frame goes to audio, there is on max and the micro amp is also.
  Really, I can't work what is the problem?

  It's like I have to shout in my microphone for anyone to hear.
  Someone at - it any ideas what this could be? I searched google,

  Thank you all in advance for your help

  Ravvie

  Perhaps you set the volume to a higher level of your headset.
  My headset work as volume control
  Maybe you should also try a different microphone

  To be honest, the only parameters that could have an influence on the microphone are in-> sound and audio devices Control Panel

  My in my settings I enabled the (marked) mute in microphone settings and allowed the Mic2 select and Mic Boost

  Other settings microphone don t exist

• Card connection USB Arduino fails on El Capitan

  USB connection to fail Board Arduino on El Capitan but works on Yosemite. On El Capitan, the Arduino appears in the application of information system, but after connecting the printer 3D (a Robo3D) the window is empty and the connection is broken. Everything works fine on Yosemite.

  Apple makes changes in OS X from time to time. During these changes of El Capitan is called SIP (protection of the integrity of the system) which locks in certain areas of the system. Developers are responsible for providing updates to cope with these changes. You can check to see if they have an updated driver for your hardware and El Capitan with Arduino. OS X manages USB drivers for certain categories of hardware such as sound cards, mice, keyboards and others. Printer manufacturers provide their device drivers directly to Apple. Arduino is a hardware and software company, so I expect that they have their own custom drivers. If you can't solve the problem with Arduino, your only option might be to return to Yosemite. In the future, you can do surveys for you ensure that your equipment works with the new OS X before and then update to find out there are a problem.

  Update...

  A Google search reveals many discussions on this issue on Arduino support forums. Different solutions are available, supposedly there is a updated driver, signed now available to El Capitan. Go to the support of the Arduino forums and see what you can find.

• Drivers fail after retrieving the Satellite A100-285

  I used the recovery disc for the A100-285, but it now lacks the VGA, sound and other drivers who were very well before. any suggestions?

  Hello Vince

  Sorry, but I really don't understand what you are writing about. If you want to reinstall OS and have 'presets' new install OS using {color: #ff0000} Toshiba PRODUCT RECOVERY {color} DVD.

  It must be also written that contains the OS recovery CD/DVD.

• Bluetooth iPhone 6s

  I can't pair my iPhone 6 s to my MacBook Pro using bluetooth, I don't know why. Could someone help me fix this please. Thank you.

  MacBook Pro is not designed to connect to the iPhone via Bluetooth, only speakers, mice, keyboards and others. Here is a list of supported Bluetooth profiles iOS: supported Bluetooth profiles

• [SOLVED] Y580 - unable to connect to Wi - Fi

  http://i.imgur.com/MD6awJ2.jpg

  Here's what it looks like. Yesterday it worked fine, I turned off the computer laptop, is released, he lit the morning and bam, no internet. I reinstalled the drivers, then reinstalled the system, and nothing has changed. I have absolutely no idea of what went wrong. It certainly isn't for lack of the router, since other devices can connect to the Wi - Fi

  EDIT. I solved it, somehow got turned off wireless card and I just figured on Fn + F5 prompts a window where I could turn it back on.

  Thanks for getting back to us and I'm glad you solved it!

• Agilent U2722A linear voltage ramp

  I am currently writing a LABVIEW VI to interface with an Agilent U2722A. I want to measure current constantly while maximum increase of voltage of 0V to a defined use specifying the step size and no time (a linear scan of tension).

  I downloaded the driver for this device which also includes an example used for output and then take action. My first problem is that when I run this unit VI is to expire. I think that this issue MAY have something to do with the entry "triggered the level". Happened to configure voltage channel VI. I have included the example and the voltage setting channel Sub VI.

  My lack of understanding for the other SubVIs (which are based on being passed SCPI commands by VISA as strings) also prevents me from making progress. Especially the scan configures and configure trigger screws

  Scanner Confgiure takes the values for the number of points and the timestep. I don't know how I'm supposed to make use of this VI. Should I put the values you want, and then use a loop to pass different values to the chain tension set up with each iteration. Also, how is the measured timestep? I need to set up a trigger to measure the time between the points or the scan function takes care of that? I've included the sweep set up VI as the Timestep VI as well.

  Looks like that you've got another error in connection with the IO instrument. Here are some references for this error,

  -420, "request not COMPLETED;

  This error occurs when you addess the instrument to talk and he has nothing to say.

  The most likely causes are:

  1. do not send a query. You must send a valid request to the instrument before talking to talk to him. This is true even of the instruments of measurement, such as the 2001 model. You can not get a reading from 2001 until you send him a request.

  2 send an invalid request. If you sent a request and still get this error, make sure that the instrument treats the query without error. For example, send a bad request that generates an error - 113, "Undefined header" and then treat the instrument to speak will generate an error-420, "Request not COMPLETED" as well.

  3 query invalid due to an invalid command.

  Currently I do not have an instrumetn in hand so I can't understand what is exactly what's wrong, but would you mind to paste your code so that we can look into it together?

  The most accurate method is absolutely one provided by the material itself. Here is "Interval" in configure Sweep.vi.

• Why should I pay for hackers and illeagel software when all the I'm authentic.

  I have never recopyed any software of mic. or any other software. I DON'T EVEN KNOW HOW DAAAAaaaaaaa

  Hello

  1. what version of Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2. what exactly is the problem you encounter on your computer?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  See the link below on how to ask questions or help on the Forums.

  Suggestions for a question on the help forums.

  http://support.Microsoft.com/kb/555375

  You can try the link below.

  Protect your PC

  http://www.Microsoft.com/security/PC-security/piracy.aspx

  Hope this information helps you.

• try to take the EXAM a + 220-702

  I'M MOVING MY REVIEW OF THE SECOND PART OF A + LACK BY 10 POINTS OF OTHER BOOKS TO READ?

  From Mike Myers Passport still need to have an overview on the 220-702 A + review. Any help or advice please

  Hello

  You can check the link below:

  http://TechNet.Microsoft.com/en-us/library/default.aspx

  This link contains information on various topics

  Hope that information was useful

• hard ultimate carnage. I can't chat with my microphone. absolutely tried everything... WHY!

  I bought a new HP Pavilion a6803w Desktop PC model.  Installed a webcam, microphone, fax / scanner-printer etc..   I downloaded the game Flat Out Ultimate Carnage of Direct2Drive.com.  The game plays very well. I had to sign up for windows LIVE to play the game.  Everything about the game works... but I can't chat with anyone using my microphone,... its all just impossible,... I tried all the options before you contact these people in Helsinki in Finland!    Maybe it's what I have to do eventually.  Everyone in any given room can discuss "verbally" over their pickups, if they want, but I can not... I contacted specialists computer and even could not understand...!      I have Microsoft Vista Edition home premium 64... Just don't find this stupid micro bit!   Someone who knows someone who knows this problem... I would be very pleased to entrance!  Pullin my hair out here... Thank you!!! Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  xxfuzznutzz77,
  After reading your post, it seems that your headset\mic works with other programs, and you have only one problem with FlatOut.  If this is the case, then you can try a few things.  You can perform a clean boot on your system.  This will help determine if other software can be the cause of the problem.  If you do not have to uninstalled\re the game you can also try it as well.  Remove the game from your system, use The Windows Installer Cleanup utility , and then restart your system and re - install the game.  Check also that all your hardware drivers are up to date.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.