Lack of VPN Pool by default Gate-Way!

I set up Vpn Remote Client, and I give an ip 192.168.1.10 pool - 20 / 24 so when my remote Vpn Cleint is connected and try to cathc my IP for the IPCONFIG command, it only shows me

IP address is 192.168.1.10

subnet mask 255.255.255.0

gateway 0.0.0.0

It's not a problem it works like that, and all packages are in the tunnel.

Thank you

Ajay

Tags: Cisco Security

Similar Questions

Lack of 'hp34970a' utility by default instrument setup.vi when download Agilent 34907 A driver from the Web site OR

The link of the driver is

http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E961C659CE034080020E748...

There are many examples on AGILENT 34970, but the lack of "hp34970a" utility by default instrument setup.vi which belonged to the 'reset hp34970a '.

Could kindly supply me?

Thank you.

I found it in the project of Agilent model.

Lack of physical schema by default for the DataServer name

Hello
I have two ODI environments:
1. DEV - where all development activities are made and scenarios are generated here
2. The other is TEST environment, in this context, we import DEV scenarios and run here, no source code is kept here.
During execution of an interface on the TEST, I get below error, the same interface works very well in the DEV environment:
Is the stage where the interface fails
- Control - remove previous checksum
A Tab:
ODI-1228: failed task CUREBUILDINGSHUTDOWN (control) on the connection target Staging BAR BOSS.
Caused by: java.sql.SQLException: parameter IN or OUT to missing index: 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
Tab Code (Code that is put in check):
delete, with the exception of getObjectNameDefaultPSchema ("L", "SNP_CHECK_TAB", "W"): lacking the physical schema by default for DataServer named ' BOSS of BAR of staging '
where CATALOG_NAME = "
and SCHEMA_NAME = 'BARBOSS.
and ORIGIN = ' (2558001) Transactional_BARI.INT_BAR_OMP_BOSS_CUREBUILDING_SHUTDOWN'
and ERR_TYPE = 'F'
The interface is unable to recognize the physical schema of the database server. Even if only it is set correctly.
The database server created the TEST is the same as that of DEV.
I am unable to follow the reason for this kind of behavior.
Any help wolud be very useful. Thanks in advance.
Thank you
Shilpa

You can go to the topology

In the physical Architecture select technology where the BOSS of BAR of staging is set the and check if at least one of the physical schema is marked as the default value for the root.

Thank you.

VPN site to Site one-way traffic

Hi all

I set up a Vpn site-to site and everything works well in the remote site to the corporate site, but since the site of the company asa 5510, I can't access to the remote site asa 5505. I checked the logging on the SAA and I can see the packets being fallen but I can't find what I need to do to allow this traffic through. Here are most of my 5510 config, I'm sure it's something simple I'm missing, but I can't run it please help.

REMOTE network is 192.168.72.0

: Saved

: Written by enable_15 at 10:29:17.163 GMT/BDT Thu Jun 10 2010

!

ASA Version 8.0 (5)

!

host name Casa

uk domain name

activate the encrypted password of VgZT0UwPdkSV9l7N

zlo5ImUVRkHl4lcl encrypted passwd

names of

name 192.168.103.14 description of Appliance CITRIX CITRIX Appliance

name 192.168.3.12 description villages villages

DNS-guard

!

interface Ethernet0/0

nameif outside

security-level 0

IP address x.x.x.123 255.255.255.224

!

interface Ethernet0/1

nameif inside

security-level 100

192.168.3.254 IP address 255.255.255.0

!

interface Ethernet0/2

nameif dmz

security-level 50

IP 192.168.103.254 255.255.255.0

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

nameif management

security-level 100

IP 192.168.1.1 255.255.255.0

management only

!

boot system Disk0: / asa805 - k8.bin

boot system Disk0: / asa707 - k8.bin

passive FTP mode

clock timezone GMT/UTC 0

summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS server-group DefaultDNS

uk domain name

object-group network ExternalAccess

Description hosts allowed direct web access

network object-SVR-01 255.255.255.255

SVR GIS 255.255.255.255 network-object

host of network-object cient

host villages network-object

the ExternalAccessFromDMZ object-group network

Description hosts allowed direct web access to DMZ

CITRIX-device 255.255.255.255 network-object

network-object IRONPORT1 255.255.255.255

worker of the object-network 255.255.255.255

MitelUDPinternet udp service object-group

Description Mitel UDP services on the internet

20000-27000 object-port Beach

port-object eq sip

port-object eq 5064

MitelTCPinternet tcp service object-group

Description Mitel TCP services on the internet

port-object eq 2114

port-object eq 2116

port-object eq 35000

port-object eq 37000

port-object eq 3998

6801-6802 object-port Beach

port-object eq 6880

port-object eq www

EQ object of the https port

port-object eq 6800

EQ object Port 3478

port-object eq sip

EQ port ssh object

MitelTCPinternetOpt tcp service object-group

Description Mitel TCP optional services on the internet

port-object eq 3300

6806-6807 object-port Beach

36005 36005 object-port Beach

36005 36006 object-port Beach

EQ object Port 3478

port-object eq sip

MitelUDP2LAN udp service object-group

Description Mitel UDP for the local network of services

object-port range 1024-65535

port-object eq sip

MitelTCP2LAN tcp service object-group

Description Mitel TCP for the local network of services

port-object eq 2114

port-object eq 2116

port-object eq 35000

port-object eq 37000

port-object eq 1606

object-port 4443 eq

port-object eq 3998

port-object eq 3999

6801-6802 object-port Beach

port-object eq 6880

port-object eq www

EQ object of the https port

EQ object Port 3478

port-object eq sip

acl_outside list extended access permit icmp any any echo response

acl_outside list extended access allow all unreachable icmp

acl_outside list extended access permit icmp any any source-quench

acl_outside list extended access permit tcp any host Mail_Outside_AGH eq smtp

acl_outside list extended access permit tcp any host Mail_Outside_AGH eq https

acl_outside list extended access permit tcp any host x.x.x.123 eq ssh

acl_outside list extended access permit tcp host x.x.x.x host Icritical_Outside eq ssh

acl_outside list extended access permit tcp any host Citrix_Portal_outside eq 8088

acl_outside list extended access permit tcp any host Citrix_Portal_outside eq https

acl_outside list extended access permit tcp any host Citrix_Portal_outside eq 8081

acl_outside list extended access permit tcp any host Mail_Outside_AVON eq smtp

acl_outside list extended access permit tcp any host Mail_Outside_AVON eq https

acl_outside list extended access permit udp host x.x.x.x host Icritical_Outside eq snmp

acl_outside list extended access permit udp host x.x.x.x host Icritical_Outside eq snmp

acl_outside list extended access permit tcp any host teleworker_outside MitelTCPinternet object-group

acl_outside list extended access permit udp any host teleworker_outside MitelUDPinternet object-group

acl_outside list extended access permit tcp any host teleworker_outside MitelTCPinternetOpt object-group

acl_outside list extended access permit tcp host x.x.x.x host Icritical_Outside eq ssh

acl_outside list extended access permit udp any host ESX-PAL-01 eq ntp

acl_outside list extended access permit udp any host ESX-PAL-02 eq ntp

acl_outside list extended access permit udp any host ESX-PAL-03 eq ntp

inside_outbound_nat0_acl to access ip 192.168.1.0 scope list allow 255.255.255.0 172.30.100.0 inactive 255.255.255.224

inside_outbound_nat0_acl list of allowed ip extended access all 172.31.1.0 255.255.255.0

inside_outbound_nat0_acl to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.103.0 255.255.255.0

inside_outbound_nat0_acl to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.72.0 255.255.255.0

inside_pnat_outbound list extended access allowed object-group ip ExternalAccess everything

acl_dmz list extended access permit ip host host IRONPORT1 Mail_Inside_AGH

acl_dmz list extended access permit udp host field of pal-svr-22 eq IRONPORT1 host

acl_dmz list extended access permit tcp host IRONPORT1 host pal-svr-22 eq 3268

acl_dmz list extended access permit udp host host IRONPORT1 ARM-SVR-01 eq field

acl_dmz list extended access permit tcp host IRONPORT1 host ARM-SVR-01 eq 3268

acl_dmz list extended access permit udp host host IRONPORT1 Pal-Svr-17 eq field

acl_dmz list extended access allowed icmp host host IRONPORT1 Mail_Inside_AGH

access extensive list ip 192.168.103.0 acl_dmz allow 255.255.255.0 any

acl_dmz list extended access permit tcp host host CITRIX-device-CITRIXCSG-lan eq https inactive

acl_dmz list extended access permit ip any host CITRIXCSG-lan idle

acl_dmz list extended access permit tcp host IRONPORT1 eq Mail_Outside_AGH smtp

acl_dmz list extended access permit tcp host teleworker host 192.168.20.1 object-group MitelTCP2LAN

acl_dmz list extended access permit udp host teleworker host 192.168.20.1 object-group MitelUDP2LAN

dmz_pnat_outbound list extended access allowed object-group ip ExternalAccessFromDMZ all

access extensive list ip 192.168.103.0 dmz_nat0_inbound allow 255.255.255.0 192.168.3.0 255.255.255.0

dmz_nat0_inbound list of ip host 192.168.20.1 telecommuter host allowed extended access

access extensive list ip 192.168.21.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

access extensive list ip 192.168.22.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

access extensive list ip 192.168.23.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

access extensive list ip 192.168.24.0 inside_pnat_outbound_AVON allow 255.255.248.0 all

inside_pnat_outbound_AVON to access extended list ip 192.168.32.0 allow 255.255.240.0 everything

access extensive list ip 192.168.48.0 inside_pnat_outbound_AVON allow 255.255.248.0 all

access extensive list ip 192.168.56.0 inside_pnat_outbound_AVON allow 255.255.252.0 all

access extensive list ip 192.168.60.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

allow any scope to an entire ip access list

inside_nat_AVON_Marshall list extended access permit ip host Mail_Inside_AVON all

dmz_pnat1_outbound list of ip telecommuter host allowed extended access any

outside_1_cryptomap to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.72.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

logging e-mail notifications

uk address record

exploitation forest-address recipient [email protected] / * / critical level

Outside 1500 MTU

Within 1500 MTU

MTU 1500 dmz

management of MTU 1500

IP local pool vpnpool 172.31.1.1 - 172.31.1.254 mask 255.255.255.0

no failover

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ICMP allow no dmz echo

ICMP allow all dmz

ASDM image disk0: / asdm-625 - 53.bin

ASDM location SVR-01 255.255.255.255 inside

ASDM location svr-02 255.255.255.255 inside

ASDM location IRONPORT1 255.255.255.255 dmz

ASDM location 194.81.55.226 255.255.255.255 dmz

ASDM 255.255.255.255 inside server location

ASDM location CITRIX-device 255.255.255.255 dmz

ASDM group ExternalAccess inside

ASDM group dmz ExternalAccessFromDMZ

don't allow no asdm history

ARP timeout 14400

Global x.x.x.121 2 (outdoor)

Global 1 x.x.x.125 (outside)

Global Mail_Outside_AVON 3 (outside)

Global Mail_Outside_AGH 4 (outside)

Global teleworker_outside 5 (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 2-list of access inside_pnat_outbound_AVON

NAT (inside) 3 access-list inside_nat_AVON_Marshall

NAT (inside) 1 access-list inside_pnat_outbound

NAT (dmz) 0-list of access dmz_nat0_inbound outside

NAT (dmz) 4 access-list dmz_pnat_outbound

NAT (dmz) 5 access-list dmz_pnat1_outbound

static (inside, outside) tcp ssh Icritical ssh netmask 255.255.255.255 Icritical_Outside

static (inside, outside) tcp https Mail_Outside_AGH Mail_Inside_AGH https netmask 255.255.255.255

static (dmz, outside) tcp smtp smtp IRONPORT1 netmask 255.255.255.255 Mail_Outside_AGH

static (inside, outside) tcp https Mail_Outside_AVON Exchange_Inside_AVON https netmask 255.255.255.255

static (inside, outside) tcp smtp smtp Mail_Inside_AVON netmask 255.255.255.255 Mail_Outside_AVON

static (inside, outside) udp snmp Icritical snmp netmask 255.255.255.255 Icritical_Outside

static (dmz, outside) device-CITRIX-Citrix_Portal_outside netmask 255.255.255.255

static (inside, outside) Mail_Outside_AVON Mail_Inside_AVON netmask 255.255.255.255

static (dmz, external) teleworker_outside netmask 255.255.255.255 teleworker

Access-group acl_outside in interface outside

Access-group acl_dmz in dmz interface

Route outside 0.0.0.0 0.0.0.0 X.X.X.254 1

Route inside 192.168.0.0 255.255.0.0 192.168.3.3 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

oner http 255.255.255.255 inside

http 192.168.1.0 255.255.255.0 management

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs Group1

card crypto outside_map 1 set r.r.r.244 counterpart

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

No encryption isakmp nat-traversal

Telnet timeout 5

SSH x.x.x.x 255.255.255.255 outside

SSH Mail_Inside_AGH 255.255.255.255 inside

SSH timeout 5

Console timeout 0

management of 192.168.1.2 - dhcpd address 192.168.1.254

enable dhcpd management

!

a basic threat threat detection

statistical threat detection port

Statistical threat detection Protocol

Statistics-list of access threat detection

a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

prefer NTP server SVR - DC1 source inside

internal VPN group policy

attributes of VPN group policy

value 192.168.x.x 192.168.x.x WINS server

Server DNS value 192.168.x.x 192.168.x.x

enable IPSec-udp

value by default domain-ACE

username, password pmmPwcDD/inpnNfB VPN encrypted privilege 0

attributes of VPN username

Strategy-Group-VPN VPN

VPN Tunnel-group type remote access

General-attributes of VPN Tunnel-group

address vpnpool pool

Group Policy - by default-VPN

Group-tunnel VPN ipsec-attributes

pre-shared key *.

tunnel-group r.r.r.244 type ipsec-l2l

r.r.r.244 tunnel ipsec-attributes group

pre-shared key *.

by default-group r.r.r.244 tunnel-Group-map

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns migrated_dns_map_1

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the migrated_dns_map_1 dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the netbios

inspect the tftp

inspect the sip

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:8360816431357f109b3c4b950d545c86

: end

This route is duplicated with the remote network

Route inside 192.168.0.0 255.255.0.0 192.168.3.3 1

I suggest to make this more specific subnet or add something like

Route outside 192.168.72.0 255.255.255.0 outside_default_gateway_ip

Internal, if above not in fact help, put a trace packet to simulate traffic even that fails on the 5510.

http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/p.html#wp1878788

Kind regards

IOS SSL VPN any given by the way

Hello

I currently use a router 1841 with T4 AdvSec IOS 12.4 (24) on this subject. I used to have a configuration in tunnel SSL work working, but for some reason, it was gone and I rebuild the configuration. Unfortunately, I was able to configure the router to perform the SSL tunnel, but I am not able to transmit data over the VPN. I am only able to ping the inside interface of the router and that's it. If I try to PING the router scope to the remote PC, I am able to get answers. Trying what on the PING remote network does not provide all the answers back. I think there is some kind of routing does not here or I'm missing some sort of configuration to allow VPN pass data through properly. Here is an excerpt of my setup. I tried to use the CCP and the configuration that it provided did not provide a solution.

Any help is appreciated.

Kind regards

Karim

Null0 interface
no ip unreachable
!
interface FastEthernet0/0
Inside description
IP 192.168.254.254 255.255.255.0
IP access-group-BLOCK ACCESS to
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
no ip mroute-cache
automatic duplex
automatic speed
No mop enabled
service-policy output family
!
interface FastEthernet0/1
Outside description
bandwidth 100000
dhcp customer_id FastEthernet0/1 IP address
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
No mop enabled
!
IP pool local VPN_Pool 192.168.254.33 192.168.254.43

!

WebVPN gateway SSL_gw
hostname remote.counterstrike.ca
IP address port 443
SSL trustpoint TP-self-signed-697360447
development
!
WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2019-k9.pkg sequence 1
!
WebVPN install svc flash:/webvpn/anyconnect-macosx-i386-2.5.2019-k9.pkg sequence 2
!
WebVPN context remote_access
login-photo SECURITY.jpg file
logo file csns.jpg
Black color
secondary-color red
title-Red
text-color black
SSL authentication check all
!
connection message 'access restricted to authorized users.
!
Group Policy SSL_policy
functions compatible svc
SVC-pool of addresses "VPN_Pool."
SVC Dungeon-client-installed
SVC split include 192.168.254.0 255.255.255.0
virtual-model 1
Group Policy - by default-SSL_policy
AAA authentication list default
Gateway SSL_gw
Max-users 2
development

The best practical config will use an IP pool that is not associated with logical interfaces and physical on the router. For example, you can use 192.168.253.0/24. You will then need to make sure your internal routing knows how to get the traffic destined to the 192.168.253.0 pool to the SSL gateway router. Finally, you will want to ensure that exempt you traffic 192.168.254.0/24->192.168.253.0/24 your outgoing NAT process.

Todd

Difference between keep pool Vs recycle pool vs default

Good morning experts;
I have need of a few differences between keep pool recycle Vs vs default pool.
How it is differ from each other.
Thanks in advance...

8f953842-815B-4D8C-833d-f2a3dd51e602 wrote:

Thanks for your reply Marg.

If I pin an object in the shared pool, the whole object (all blocks) is in the buffer pool.

but you say depending on the query plan,

Oracle will place only parts of objects in the cache of the buffers at any time.

Example:

> To pin a table

SQL > alter table emp storage (USER_TABLES) keep;

This table with 1 million record and it contains "n" columns.

Consider that I need o/p of columns name, emp_id, salary only.

i.e. which receive salaries over $ 8000.

----------------------

Oracle will show required o/p. According to your explanation, I can't guess...

Question: How oracle will place only parts of objects in the buffer instead of the object in its entirety?

-------------------------------

Please explain a little more.

Oracle uses blocks. The lines are in blocks. When you request a column in a row, Oracle must get the block. When you ask a couple of columns from several lines, Oracle must obtain several blocks. Oracle makes copies of blocks. Oracle must manage maybe a lot of people to access the rows in the same or different blocks. Everyone must have the block appear as if it did at the start of the transaction.

Oracle has several ways to get the blocks. It can look in the SGA, if appropriate is not it be read from the disk, or it may decide to read the many blocks both a disc, or it could even decide to read just as much as he can in PGA a user, maybe also will cancel in any of these ways to make a consistent copy of reading for the user.

So when you look at the statistics for a session, you might see gets sequential or gets scattered. The first is often the index access, then a single block is obtained from anywhere and placed in the SGA. The latter is often the analysis, and the blocks are scattered, they don't necessarily have to be obtained in order. Remember, an Oracle block can be a number of operating system blocks and a multi [-oracle]-read block can be a lot of data.

So with all these blocks to enter the LMS, it must decide what remains and what is happening. It uses an algorithm (LRU) least recently used to eject blocks and can read blocks in the middle or the end of the list, according to. This is why the default buffer pool works so well, whatever it is continuously available in the grand scheme of things will stay warm and stay there. SGA was much smaller, it's much easier to have things isn't everything in fact so hot get ejected and written, only to be read in a short time after, for the pools of spare would allow these places to be kept, or recycled, as arbitrarily defined.

So do blocks like the passage of objects in the SGA. There are usually several copies of the blocks.

site2site distance-VPN and access-PIX - no way?

I have,

I have a problem wrt site2site & VPN remote access on a PIX:

My setup is as follows: PIX (6.3) puts an end to two a site2-site VPN and also should the remote access service clients using the client VPN Cisco (4.0.x).

The problem is with remote access VPN clients, obtain an IP address on their VPN interface, but customers cannot reach anything. (Please note that the site2site VPN runs without problem)

To be precise (see config-excerpts below):

The customer, who has 212.138.109.20 as its IP address gets an IP 10.0.100.1 on his card-VPN which comes from the "vpnpool of the pool.

configured on the PIX. This customer relationships to reach servers on interface 'inside' of the PIX as 10.0.1.28.

However, the client cannot achieve * nothing *-a server on the inside or anything like that (e.g. Internet) outside!

Using Ethereal traces, I discovered that the packets arrive inside interface coming 10.0.100.1 (IP address of the)

VPN - client). I also see the response from the server (10.0.1.28) to 10.0.100.1. However for some reason any package does not thanks to

the PIX to the customer. PIX-newspapers also show packets to and from the VPN client to the inside interface - and * no. * drops. So to my knowledge the packets from server to the VPN client really should be done through the PIX.

I have attached the following as separate files:

(o) the parts of the PIX config

(o) packets showing PIX-log between the VPN client and the server (s) on the interface inside

(o) ethereal-trace done inside the watch interface also packets between VPN client and server (s)

I have really scratched my head for a while on this one, tested a lot of things, but I really don't know what could be a problem with my

config.

After all, it really should be possible to run site2site - and on the same PIX VPN remote access, shouldn't it?

Thank you very much in advance for your help,.

-ewald

I think that your problem is in your ACL and your crypto card:

access-list 101 permit ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

access-list 101 permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0

access-list 101 permit ip 10.0.3.0 255.255.255.0 10.0.2.0 255.255.255.0

access-list 101 permit ip 10.0.1.0 255.255.255.0 10.0.100.0 255.255.255.0

correspondence address 1 card crypto loc2rem 101

This means that this map correspond to these addresses. But your dynamic map is one that must match 10.0.100.0, 10.0.1.0 traffic because your pool local ip is 10.0.100.x. I think what is happening is that the return traffic from the lan to vpn clients trying to get out of the static tunnel, which probably does not exist (for the netblocks - you probably have a security association for each pair of netblocks, but not for vpn clients) and so do not.

I would recommend adding these lines:

access-list 105 allow ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

access-list 105 allow ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0

access-list 105 permit 10.0.3.0 ip 255.255.255.0 10.0.2.0 255.255.255.0

no correspondence address 1 card crypto loc2rem 101

correspondence address 1 card crypto loc2rem 105

Then reapply:

loc2rem interface card crypto outside

Cisco 1841 how vpn tunnels? default 100vpn?

Hi everyone, I have read the previous posts and I read that the cisco 1841 can manage up to 100 default VPN tunnels.

1. is this true? (I enclose my worm of show)

2. this version of IOS support SSL VPN tunnels as well?

SH ver
Cisco IOS Software, 1841 (C1841-ADVSECURITYK9-M), Version 12.4 (3i), VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Thursday 28 November 07 18:48 by stshen

ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

Uptime SPAREROUTER is 7 minutes
System to regain the power ROM
System image file is "flash: c1841-advsecurityk9 - mz.124 - 3i.bin".

... Output omitted

Cisco 1841 (revision 7.0) with 234496 K/K 27648 bytes of memory.
Card processor ID FTX1151Y0BQ
2 FastEthernet interfaces
1 module of virtual private network (VPN)
Configuration of DRAM is 64 bits wide with disabled parity.
191K bytes of NVRAM memory.
62720K bytes of ATA CompactFlash (read/write)

Configuration register is 0 x 2102

SPAREROUTER #.

Thank you

Randall

Hello

I guess that means that the total number of vpn ipsec tunnels taken in charge by the router of SSL VPN AIM is 800.

If you want only a SSL VPN without the AIM module can it be based on the license.

Kind regards

Anisha

P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

2651xm (IOS 12.4(9T) VPN server - default route

When my clients connect to the VPN server, their default route prepared to go through the VPN. If they resemble the State of the connection, it shows "0.0.0.0 0.0.0.0" under the secure routes. I want to do so that one class C subnet is in the list. How can I do this?

Thank you!

This is called "split tunneling". For maximum security, you should not use it.

Never done on IOS myself, but this would contribute to the code snippet:

access-list 150 permit ip 30.30.30.0 0.0.0.255 any

ISAKMP crypto group of hw-client-name client configuration.

HW-client-password key

DNS 30.30.30.10 30.30.30.11

WINS 30.30.30.12 30.30.30.13

domain cisco.com

pool dynpool

ACL 150

Of http://www.cisco.com/application/pdf/en/us/guest/products/ps6659/c1650/cdccont_0900aecd80313bd6.pdf

Only way ASA Vpn access

Hello:

I have configured ASA 5505 to acept Cisco VPN Clients on IP-SEC and access internal subnet of tuneling (added a rule exempt NAT too) and the VPN Clients can connect and work without problems.

But no internal network or the ASA I can ping or conect to the VPN Clients.

My configuration:

Internal network: 172.26.1.0 255.255.255.0

The VPN Clients network 172.26.2.0 255.255.255.0

Can you help me?

Here is my configuration:

: Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name ftf.es enable password xxxxxxx encrypted passwd xxxxx encrypted names name 217.125.44.23 IP_publica name 172.26.1.100 Servidor name 192.168.1.3 IP_externa name 192.168.2.3 IP_Externa2 name 172.26.2.0 VPN_Clients ! interface Vlan1 nameif inside security-level 100 ip address 172.26.1.89 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address IP_externa 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 switchport access vlan 12 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 13 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name ftf.es same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group service terminal-server tcp port-object eq 3389 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list FTFVPN_splitTunnelAcl standard permit 172.26.1.0 255.255.255.0 access-list FTFVPN_Group_splitTunnelAcl standard permit 172.26.1.0 255.255.255.0 access-list outside_access_in extended permit tcp any host IP_externa eq 3389 access-list outside_access_in extended permit object-group TCPUDP any host IP_externa eq www access-list FTF_ADSL2_splitTunnelAcl standard permit any access-list inside_nat0_outbound extended permit ip 172.26.1.0 255.255.255.0 VPN_Clients 255.255.255.0 access-list inside_nat0_outbound extended permit ip 172.26.1.0 255.255.255.0 host 172.26.1.199 access-list outside_nat0_outbound extended permit ip VPN_Clients 255.255.255.0 172.26.1.0 255.255.255.0 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool vpn 172.26.1.180-172.26.1.200 mask 255.255.255.0 ip local pool vpn2 172.26.2.100-172.26.2.200 mask 255.255.255.0 ip local pool vpn3 172.26.3.100-172.26.4.150 mask 255.255.255.0 ip local pool vpn4 172.26.1.240-172.26.1.250 mask 255.255.255.0 ip local pool FTFVPN_Pool 176.26.1.150-176.26.1.170 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 3389 Servidor 3389 netmask 255.255.255.255 static (inside,outside) tcp interface www Servidor www netmask 255.255.255.255 access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 172.26.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 40 set pfs group1 crypto dynamic-map outside_dyn_map 40 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 60 set pfs group1 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 80 set pfs group1 crypto dynamic-map outside_dyn_map 80 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 100 set pfs group1 crypto dynamic-map outside_dyn_map 100 set transform-set TRANS_ESP_3DES_SHA crypto dynamic-map outside_dyn_map 120 set pfs group1 crypto dynamic-map outside_dyn_map 120 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal  20 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 172.26.1.90-172.26.1.217 inside ! webvpn enable outside url-list FTFVLC "DYNAMICS" cifs://172.26.1.100 1 port-forward TEST 3389 172.26.1.100 3389 Terminal Server group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes banner value Bienvenido a la red de FTF dns-server value 172.26.1.100 80.58.32.97 vpn-tunnel-protocol IPSec l2tp-ipsec webvpn split-tunnel-policy tunnelall default-domain value ftf.es group-policy DfltGrpPolicy attributes banner none wins-server none dns-server none dhcp-network-scope none vpn-access-hours none vpn-simultaneous-logins 3 vpn-idle-timeout 30 vpn-session-timeout none vpn-filter none vpn-tunnel-protocol IPSec l2tp-ipsec webvpn password-storage disable ip-comp disable re-xauth disable group-lock none pfs disable ipsec-udp disable ipsec-udp-port 10000 split-tunnel-policy tunnelall split-tunnel-network-list none default-domain none split-dns none intercept-dhcp 255.255.255.255 disable secure-unit-authentication disable user-authentication disable user-authentication-idle-timeout 30 ip-phone-bypass disable leap-bypass disable nem disable backup-servers keep-client-config msie-proxy server none msie-proxy method no-modify msie-proxy except-list none msie-proxy local-bypass disable nac disable nac-sq-period 300 nac-reval-period 36000 nac-default-acl none address-pools value vpn2 smartcard-removal-disconnect enable client-firewall none client-access-rule none webvpn   functions url-entry   html-content-filter none   homepage none   keep-alive-ignore 4   http-comp gzip   filter none   url-list none   customization value DfltCustomization   port-forward value TEST   port-forward-name value Acceso a aplicaciones   sso-server none   deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information   svc none   svc keep-installer installed   svc keepalive none   svc rekey time none   svc rekey method none   svc dpd-interval client none   svc dpd-interval gateway none   svc compression deflate group-policy FTFVPN_Group internal group-policy FTFVPN_Group attributes dns-server value 172.26.1.100 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value FTFVPN_Group_splitTunnelAcl default-domain value ftf.es address-pools value vpn2 group-policy VPNSSL internal group-policy VPNSSL attributes vpn-tunnel-protocol IPSec l2tp-ipsec webvpn webvpn   functions url-entry file-access file-entry file-browsing mapi port-forward filter http-proxy auto-download citrix username raul password xxxxxx encrypted privilege 0 username raul attributes vpn-group-policy FTFVPN_Group tunnel-group DefaultRAGroup general-attributes address-pool vpn2 default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultWEBVPNGroup general-attributes default-group-policy VPNSSL tunnel-group DefaultWEBVPNGroup webvpn-attributes nbns-server Servidor master timeout 5 retry 3 tunnel-group FTFVPN_Group type ipsec-ra tunnel-group FTFVPN_Group general-attributes address-pool vpn2 default-group-policy FTFVPN_Group tunnel-group FTFVPN_Group ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect esmtp   inspect sqlnet   inspect skinny   inspect sunrpc   inspect xdmcp   inspect sip   inspect netbios   inspect tftp ! service-policy global_policy global prompt hostname context Cryptochecksum:f5e713652d4a2e2623248d7e49086105 : end asdm image disk0:/asdm-524.bin asdm location Servidor 255.255.255.255 inside asdm location IP_publica 255.255.255.255 inside asdm location IP_externa 255.255.255.255 inside asdm location IP_Externa2 255.255.255.255 inside asdm location VPN_Clients 255.255.255.0 inside no asdm history enable

Raul,

I don't see to apply ACLs inside the interface or as vpn-filter that will prevent the PING of the SAA within the intellectual property to the VPN client.

Are you sure that the VPN client does not have the Windows Firewall on or antivirus software that prevents to respond to PING?

Federico.

Movement of the members of the default pool

I have a band with a PS6210xs and a PS6210x. The x is in the default pool and the xs is in a different pool. Together, they hold more than 26 TB of data, so any member can contain data in itself. We have also a new 6210 x that I'm about to join. I'm hoping to join the new table for the group, but not all have the data move to it at first, so I have a few questions.

6210 x and 6210xs may be in the same pool (putting aside the question of space for a moment)? The hybrid to run raid 6 fast forward and the other just races raid 6.

If they can do in a pool, there's a downside in terms of performance for this?

Back to the question of space, and before reach us the new table, is it possible to move the 6210 x of the pool by default to other basins, if the Member of the other pool doesn't have enough free space in itself?

If I can't do this, it is possible to join the new table for the group, but move to a brand new swimming pool until it begins to automatically get the data from the other Member of the default pool?

Thank you.

Hello

Because they have two members are not in the same pool, I would leave as-is. You can have up to four pools in a group.

When you add a member to a group, it has no RAID assigned level. And so it has no space to provide for the group. He is assigned to the default group, but you can create a new pool and it will install everything first. Then set the RAID type. In addition, you can delay making the space available for the group as an option to create time. That would give you time to move the Member to a new pool.

Kind regards

Don

NAT exempted for pool vpn in ASDM

I read everything I can find it, and I think I understand what is asked of me, but I'm not exactly sure how do within the ASDM

I used the "wizard" to implement the anyconnect VPN and think it's well.

But the wizard reminded me that I had to add a rule to exempt nat ok then the wizard isn't such a wiz after all and cannot put everything in place.

My VPN pool is 10.10.35.1 through 50

My internal networks is 10.10.30.0/24 and 10.10.10.0/24

Do I need 2 nat rules exempt to allow remote desktop windows for internal machines via AnyConnect?

and if so, how do I that in ASDM (I'm totally distraught on the use of the CLI, and if that works better, I would like a step by step)

Thank you

Dennis

Hello

You can insert the following configuration to configure the NAT0 / exempt NAT required

Note of the INTERIOR-NAT0 NAT0 for VPN access-list

access list for the INTERIOR-NAT0 allowed ip 10.10.30.0 255.255.255.0 10.10.35.0 255.255.255.0

the INTERIOR-NAT0 10.10.10.0 ip access list allow 255.255.255.0 10.10.35.0 255.255.255.0

NAT (inside) 0-list of access to the INTERIOR-NAT0

You can use the CLI directly or you can use the ASDM--> tools--> command-line Interface. You can choose the option "several lines" before inserting the commands to send to the ASA.

Hope this helps

-Jouni

Cannot access any internal IPs when you are connected by VPN to ASA5505

Hello

I was able to configure VPN to work a bit on my ASA 5505. I can connect to the VPN and ping some IP addresses within the network. But some IPs don't react, I get "Request Timed Out"

For example:

10.10.0.4 - it works
10.10.0.5 - is not word
10.10.0.10 - it works
10.10.0.11 - it works
10.10.0.13 - does not work

If I ping from the network internally, all works well.

Does anyone have recommendations on how to address the issue?

VPN is the marking of the packages in a way that would trigger a firewall block?

It is the configuration of my ASA:

VPN with the name 'VPN-Remote' is the one I use.

 ASA Version 9.2(2)4 ! hostname ciscoasa enable password NuLKvvWGg.x9HEKO encrypted passwd NuLKvvWGg.x9HEKO encrypted names ip local pool RA_VPN 10.10.1.1-10.10.1.255 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.10.0.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ipv6 enable ! boot system disk0:/asa922-4-k8.bin ftp mode passive clock timezone CST -6 clock summer-time CDT recurring same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network INSIDE-SUBNET object network sb-service-80 host 10.10.0.143 object network sbservicetest object network sb-service-443 host 10.10.0.143 object network dvr_web host 10.10.0.30 object service DVR-Tomcat_port service tcp source eq 8080 destination eq 8080 object network NETWORK_OBJ_10.10.1.0_24 subnet 10.10.1.0 255.255.255.0 object network dvr_mobile host 10.10.0.30 object service DVR-Mobile_port service tcp source eq 18004 destination eq 18004 object network WAN host 98.195.48.88 object service Web80 service tcp source eq www destination eq www object network NETWORK_OBJ_10.10.2.0_24 subnet 10.10.2.0 255.255.255.0 object network NETWORK_OBJ_10.10.0.0_24 subnet 10.10.0.0 255.255.255.0 object-group network sb-service network-object object sb-service-443 network-object object sb-service-80 object-group network DVR-service network-object object dvr_web network-object object dvr_mobile object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit icmp any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit icmp any any inactive access-list Outside_access_in extended permit tcp any object sb-service-80 eq www access-list Outside_access_in extended permit tcp any object sb-service-443 eq https log disable access-list Outside_access_in extended permit tcp any object dvr_web eq 8080 log disable access-list Outside_access_in extended permit tcp any object dvr_mobile eq 18004 log disable access-list Outside_access_in extended permit icmp any any time-exceeded access-list Outside_access_in extended permit icmp any any unreachable log warnings access-list Outside_access_in extended permit icmp any any echo-reply access-list Outside_access_in extended permit icmp any any source-quench access-list global_mpc extended permit ip any any access-list RA_VPN-ACL extended permit ip object NETWORK_OBJ_10.10.2.0_24 any access-list Remote-VPN_splitTunnelAcl standard permit 10.10.0.0 255.255.255.0 access-list AnyConnect_Client_Local_Print extended deny ip any4 any4 access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq lpd access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 631 access-list AnyConnect_Client_Local_Print remark Windows' printing port access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 9100 access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.251 eq 5353 access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol access-list AnyConnect_Client_Local_Print extended permit udp any4 host 224.0.0.252 eq 5355 access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol access-list AnyConnect_Client_Local_Print extended permit tcp any4 any4 eq 137 access-list AnyConnect_Client_Local_Print extended permit udp any4 any4 eq netbios-ns pager lines 24 logging enable logging asdm notifications no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside 10.10.0.111 2055 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-731.bin no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (any,any) source static NETWORK_OBJ_10.10.1.0_24 NETWORK_OBJ_10.10.1.0_24 ! object network obj_any nat (inside,outside) dynamic interface object network sb-service-80 nat (inside,outside) static interface no-proxy-arp service tcp www www object network sb-service-443 nat (inside,outside) static interface no-proxy-arp service tcp https https object network dvr_web nat (inside,outside) static interface no-proxy-arp service tcp 8080 8080 object network dvr_mobile nat (inside,outside) static interface no-proxy-arp service tcp 18004 18004 ! nat (inside,outside) after-auto source dynamic any interface inactive access-group inside_access_in in interface inside access-group Outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL http server enable http 10.10.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server group snmp_g v3 auth snmp-server user snmp_u snmp_g v3 encrypted auth md5 1d:1b:67:96:29:9b:5c:49:42:d5:a4:10:13:e0:b2:ee snmp-server host inside 10.10.0.111 community ***** version 2c no snmp-server location no snmp-server contact snmp-server community ***** crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA ESP-3DES-SHA ESP-DES-SHA ESP-AES-128-SHA-TRANS ESP-AES-192-SHA-TRANS ESP-AES-256-SHA-TRANS ESP-3DES-SHA-TRANS ESP-DES-SHA-TRANS crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0 enrollment self subject-name CN=10.10.0.1,CN=ciscoasa crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 certificate aa711054 308201af 30820159 a0030201 020204aa 71105430 0d06092a 864886f7 0d010105 0500302c 3111300f 06035504 03130863 6973636f 61736131 17301506 092a8648 86f70d01 09021608 63697363 6f617361 301e170d 31353035 32303230 34353137 5a170d32 35303531 37323034 3531375a 302c3111 300f0603 55040313 08636973 636f6173 61311730 1506092a 864886f7 0d010902 16086369 73636f61 7361305c 300d0609 2a864886 f70d0101 01050003 4b003048 024100bc 4278aeda 26601456 0e035bb5 6021adc5 0ac9149a 11d95e72 c5a8509b 514fd50d 7a86bdb3 a00bda84 4e6bda8d 50124c64 1179acc4 b2869092 9a742b52 f97c2302 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014d86a b4f1585d 7d93a0c7 7a1df9dd b37b0051 18aa301d 0603551d 0e041604 14d86ab4 f1585d7d 93a0c77a 1df9ddb3 7b005118 aa300d06 092a8648 86f70d01 01050500 034100a3 f0441214 1add483b 286fa44e 3844acce 27a68b2e 54f21dce 9a917783 1ab394f7 2d87e4d4 bcfcc7ef 6b26d604 bd0ea56f 05a72d0d 6c37413a b60216f3 612e0a quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside crypto ikev1 enable outside crypto ikev1 policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto ikev1 policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto ikev1 policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto ikev1 policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto ikev1 policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto ikev1 policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto ikev1 policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto ikev1 policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto ikev1 policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto ikev1 policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto ikev1 policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto ikev1 policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto ikev1 policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 telnet timeout 5 ssh stricthostkeycheck ssh 10.10.0.0 255.255.255.0 inside ssh timeout 5 ssh key-exchange group dh-group1-sha1 console timeout 0 no vpn-addr-assign dhcp dhcpd auto_config outside ! dhcpd address 10.10.0.5-10.10.0.254 inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 166.70.136.41 source outside ntp server 108.166.189.70 source outside ntp server 63.245.214.136 source outside ssl trust-point ASDM_Launcher_Access_TrustPoint_0 inside ssl trust-point ASDM_Launcher_Access_TrustPoint_0 inside vpnlb-ip webvpn enable outside group-policy DfltGrpPolicy attributes group-policy Remote-VPN internal group-policy Remote-VPN attributes dns-server value 10.10.0.201 8.8.8.8 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Remote-VPN_splitTunnelAcl default-domain value local.prv username snmp_test password Ocwq862v84DTwooX encrypted username VPN_User password KgHsdRdYP0lAyeqPIXn51g== nt-encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes address-pool RA_VPN tunnel-group DefaultRAGroup ipsec-attributes ikev1 pre-shared-key ***** tunnel-group Remote-VPN type remote-access tunnel-group Remote-VPN general-attributes address-pool RA_VPN default-group-policy Remote-VPN tunnel-group Remote-VPN ipsec-attributes ikev1 pre-shared-key ***** ! class-map global-class match access-list global_mpc class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect pptp inspect icmp inspect icmp error class global-class flow-export event-type all destination 10.10.0.111 ! service-policy global_policy global prompt hostname context no call-home reporting anonymous hpm topN enable Cryptochecksum:f249b6940d463cc987b9aa828d8d8282 : end

Hello

If please check windows or any of application firewall PC side. It's less likely the issue VPN or ASA.

HTH

Averroès.

Problems with remote access IPSec VPN

Dear Experts,

Kindly help me with this problem of access VPN remotely.

I have configured remote access VPN IPSec using the wizard. The remote client connects to fine enough seat, gets the defined IP address, sends the packets and bytes, BUT do not receive all the bytes or decrypt packets. On the contrary, the meter to guard discarded rising.

What could be possibly responsible or what another configuration to do on the SAA for the connection to be fully functional?

It can help to say that Anyconnect VPN is configured on the same external Interface on the ASA, and it is still functional. What is the reason?

AnyConnect VPN is used by staff for remote access.

Kindly help.

Thank you.

Hello

So if I understand correctly, you have such an interface for LAN and WAN and, naturally, the destination networks you want to reach via the VPN Client connection are all located behind the LAN interface.

In this case the NAT0 configuration with your software most recent could look like this

object-group, LAN-NETWORKS-VPN network

network-object

network-object

network-object

network of the VPN-POOL object

subnet

destination of LAN-NETWORKS-VPN VPN-NETWORKS-LAN static NAT (LAN, WAN) 1 static source VPN-VPN-POOL

Naturally, the naming of interfaces and objects might be different. In this case its just meant to illustrate the purpose of the object or interface.

Naturally I'm not sure if the NAT0 configuration is the problem if I can't really say anything for some that I can't see the configuration.

As for the other question,

I have not implemented an ASA to use 2 interfaces so WAN in production environments in the case usually has separate platforms for both or we may be hosting / providing service for them.

I imagine that there are ways to do it, but the main problem is the routing. Essentially, we know that the VPN Client connections can come from virtually any public source IP address, and in this case we would need to default route pointing to the VPN interface since its not really convenient to set up separate routes for the IP address where the VPN Client connections would come from.

So if we consider that it should be the default route on the WEBSITE of the ASA link, we run to the problem that we can not have 2 default routes on the same active device at the same time.

Naturally, with the level of your software, you would be able to use the NAT to get the result you wanted.

In short, the requirements would be the following
- VPN interface has a default route, INTERNET interface has a default route to value at the address below
- NAT0 between LAN and VPN interface configuration to make sure that this traffic is passed between these interface without NAT
- Interfaces to special NAT configuration between LAN and INTERNET which would essentially transfer all traffic on the INTERNET interface (except for VPN traffic that we have handled in the previous step)
The above things would essentially allow the VPN interface have the default route that would mean that no matter what the VPN Client source IP address it should be able to communicate with the ASA.

The NAT0 configuration application would be to force ASA to pass this traffic between the LAN and VPN (pools) for VPN traffic.

The special configuration of NAT then match the traffic from LAN to ANY destination address and send to the INTERNET interface. Once this decision is made the traffic would follow the lower value default route on this interface.

I would say that this isn't really the ideal situation and the configuration to use in an environment of productin. It potentially creates a complex NAT configuration such that you use to manipulate the traffic instead of leave the mark of table routing choice in the first place.

Of course, there could be other options, but I have to test this configuration before I can say anything more for some.

-Jouni

IPSec VPN: connected to the VPN but cannot access resources

Hello

I configured a VPN IPSec on two ISP with IP SLA configured, there is a redundancy on the VPN so that if address main is it connect to the VPN backup.

QUESTIONS

-Connect to the primary address and I can access resources

-backup address to connect but can not access resources for example servers

I want a way to connect to backup and access on my servers resources. Please help look in the config below

configuration below:

interface GigabitEthernet0/0

LAN description

nameif inside

security-level 100

IP 192.168.202.100 255.255.255.0

!

interface GigabitEthernet0/1

Description CONNECTION_TO_DOPC

nameif outside

security-level 0

IP address 2.2.2.2 255.255.255.248

!

interface GigabitEthernet0/2

Description CONNECTION_TO_COBRANET

nameif backup

security-level 0

IP 3.3.3.3 255.255.255.240

!

!

interface Management0/0

Shutdown

No nameif

no level of security

no ip address

management only

!

boot system Disk0: / asa831 - k8.bin

boot system Disk0: / asa707 - k8.bin

passive FTP mode

clock timezone WAT 1

DNS domain-lookup outside

DNS server-group DefaultDNS

Name-Server 4.2.2.2

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network of object obj-200

192.168.200.0 subnet 255.255.255.0

Description LAN_200

network of object obj-202

192.168.202.0 subnet 255.255.255.0

Description LAN_202

network of the NETWORK_OBJ_192.168.30.0_25 object

subnet 192.168.30.0 255.255.255.128

network of the RDP_12 object

Home 192.168.202.12

Web server description

service object RDP

source eq 3389 destination eq 3389 tcp service

network obj012 object

Home 192.168.202.12

the Backup-PAT object network

192.168.202.0 subnet 255.255.255.0

NETWORK LAN UBA description

the DM_INLINE_NETWORK_1 object-group network

object-network 192.168.200.0 255.255.255.0

object-network 192.168.202.0 255.255.255.0

the DM_INLINE_NETWORK_2 object-group network

network-object object obj-200

network-object object obj-202

access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any

access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any

OUTSIDE_IN list extended access permit icmp any any idle state

OUTSIDE_IN list extended access permit tcp any object obj012 eq inactive 3389

gbnltunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

standard access list gbnltunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0

BACKUP_IN list extended access permit icmp any any idle state

access extensive list ip 196.216.144.0 encrypt_acl allow 255.255.255.192 192.168.202.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

backup of MTU 1500

Backup2 MTU 1500

local pool GBNLVPNPOOL 192.168.30.0 - 192.168.30.100 255.255.255.0 IP mask

no failover

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any backup

ASDM image disk0: / asdm-645 - 206.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, outside) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25

NAT (inside, outside) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.30.0_25 NETWORK_OBJ_192.168.30.0_25 non-proxy-arp-search of route static destination

!

network of object obj-200

NAT dynamic interface (indoor, outdoor)

network of object obj-202

dynamic NAT (all, outside) interface

network obj012 object

NAT (inside, outside) interface static service tcp 3389 3389

the Backup-PAT object network

dynamic NAT interface (inside, backup)

!

NAT source auto after (indoor, outdoor) dynamic one interface

Access-group interface inside INSIDE_OUT

Access-group OUTSIDE_IN in interface outside

Access-group BACKUP_IN in the backup of the interface

Route outside 0.0.0.0 0.0.0.0 2.2.2.2 1 followed by 100

Backup route 0.0.0.0 0.0.0.0 3.3.3.3 254

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

WebVPN

value of the URL-list GBNL-SERVERS

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

AAA authentication http LOCAL console

AAA authentication enable LOCAL console

http server enable 441

http 192.168.200.0 255.255.255.0 inside

http 192.168.202.0 255.255.255.0 inside

http 192.168.2.0 255.255.255.0 inside

http 192.168.30.0 255.255.255.0 inside

http 0.0.0.0 0.0.0.0 outdoors

http 0.0.0.0 0.0.0.0 backup

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

ALS 10 monitor

type echo protocol ipIcmpEcho 31.13.72.1 interface outside

NUM-package of 5

Timeout 3000

frequency 5

Annex monitor SLA 10 life never start-time now

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto IPSec_map 10 corresponds to the address encrypt_acl

card crypto IPSec_map 10 set peer 196.216.144.1

card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

inside crypto map inside_map interface

ipsec_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

ipsec_map interface card crypto outside

gbnltunnel card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

backup of crypto gbnltunnel interface card

Crypto ca trustpoint ASDM_TrustPoint0

Terminal registration

name of the object CN = GBNLVPN.greatbrandsng.com, O = GBNL, C = ng

Configure CRL

Crypto ikev1 allow inside

Crypto ikev1 allow outside

Crypto ikev1 enable backup

IKEv1 crypto policy 10

authentication crack

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 20

authentication rsa - sig

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 30

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 40

authentication crack

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 50

authentication rsa - sig

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-192 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

authentication crack

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 80

authentication rsa - sig

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 100

authentication crack

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 110

authentication rsa - sig

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 120

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 130

authentication crack

the Encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 140

authentication rsa - sig

the Encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 150

preshared authentication

the Encryption

sha hash

Group 2

life 86400

enable client-implementation to date

!

track 10 rtr 100 accessibility

!

Track 100 rtr 10 accessibility

Telnet 192.168.200.0 255.255.255.0 inside

Telnet 192.168.202.0 255.255.255.0 inside

Telnet timeout 5

SSH 192.168.202.0 255.255.255.0 inside

SSH 192.168.200.0 255.255.255.0 inside

SSH 0.0.0.0 0.0.0.0 inside

SSH 0.0.0.0 0.0.0.0 outdoors

SSH 0.0.0.0 0.0.0.0 backup

SSH timeout 30

SSH group dh-Group1-sha1 key exchange

Console timeout 0

management-access inside

a basic threat threat detection

threat detection statistics

a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

WebVPN

allow outside

enable backup

activate backup2

internal gbnltunnel group policy

attributes of the strategy of group gbnltunnel

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelspecified

greatbrandsng.com value by default-field

Group Policy 'Group 2' internal

type of remote access service

type tunnel-group gbnltunnel remote access

tunnel-group gbnltunnel General-attributes

address GBNLVPNPOOL pool

Group Policy - by default-gbnltunnel

gbnltunnel group of tunnel ipsec-attributes

IKEv1 pre-shared-key *.

type tunnel-group GBNLSSL remote access

type tunnel-group GBNL_WEBVPN remote access

attributes global-tunnel-group GBNL_WEBVPN

Group Policy - by default-gbnltunnel

tunnel-group 196.216.144.1 type ipsec-l2l

IPSec-attributes tunnel-group 196.216.144.1

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

inspect the icmp

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

HPM topN enable

Cryptochecksum:6004bf457c9c0bc1babbdbf1cd8aeba5

: end

When you say that "the external interface is downwards using failover techniques" you mean this failover occurred because the ASA is no longer able to reach the 31.13.72.1? Not that the actual interface is broken?

If this is the case, then the NATing is your problem. Since you're using the same VPN pool for VPN connections the ASA cannot distinguish between the two streams of traffic if the external interface is still in place. The SLA tracking only removes a route in the routing table, but does not affect what happens in the NAT process.

try to change the NAT statement follows him and the test (don't forget to remove the other statements to exempt of NAT for this traffic during the test):

NAT (inside,any) static static source NETWORK_OBJ_192.168.30.0_25 destination DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.30.0_25

If this does not work, I would either turn off the external interface when a failover occurs, or create a second connection profile that contains a separate mass of IP for the VPN connection and ask users to connect using this profile when a failover takes place. Don't forget to create Nat exempt instructions for this traffic also.

--

Please note all useful posts

Lack of VPN Pool by default Gate-Way!

Similar Questions

Maybe you are looking for