Lag with WRT160N

Similar Questions

• Constant lag with Apple TV 3rd generation

  Hello

  Bit of a ' first world ' issue, but really boring. I have Apple TV 3rd generation and also Google Chromecast. I can broadcast anything on Chromecast from a generation iPad 2, iPhone 6 Asia, my iMac 2011, without any problem. But whenever I try to play on Apple TV (including directly from the Apple TV menu), it lags horribly, plays a minute, again with wrong definition (like the old standard through the rain definition), improves and then lagging once again.

  I guess Apple to Apple would be the best, but this is the worst. Makes me wonder why I bought the Apple TV. Chromecast works perfectly, so I'm sure that's not the wifi at home.

  Any ideas?

  Thank you

  Chuck

  You should check the network configuration of your ATV. He seems to be struggling to reach the internet servers. The more reliable configuration tends to be wifi with DHCP and DNS set to automatic. Make sure that the ATV will connect to the best available wifi network. Note that, when you play back video on ATV, it connects directly to the server. This is true even for AirPlay, but not for mirroring. I don't know how it works with Chromecast, but I wonder if other devices have internet access and ATV is somehow private.

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Problems of lag with Safari/Youtube

  Hey guys, I had this problem for a while:

  When I close the Youtube tab (normally with a video) to get to the next tab, tab Youtube sometimes freezes for a few seconds before closing completely.

  Then Safari starts getting lag, "restless" and slow, even when I'm on Facebook or other websites in general. I noticed that my Mac starts to slow down too.

  The only way I have temporarily resolve this problem is to remove the story and the datas of Safari and start over. Or what Mac is becoming seriously lag is to restart (it happened seldom).

  This problem has occurred before the update to OS X El Capitan 10.11.3 (I thought that it improved...)

  Clues or suggestions on what to do?

  • I have never installed readers flash, adobe etc...
  • I don't have a plugins, web extensions installed.
  • I décliqués Plugin Internet on Safari, thought preference that he touched it...
  • This Youtube problem never happens with Chrome
  • I have a Macbook Pro OS X El Capitan 10.11.3, retina

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

• Will be wireless G range expander router work with WRT160N wireless

  I have a WRT160N wirelesss router set up in my house.  I recently moved the router into the garage for a cable internet and VoIP phone installation.  Now my wireless printer in my basement that allows to print properly is to get an unacceptable signal. Probably due to a density of wall in concrete or something that does not ask before.  I want to install an Expander store but I have WPA2 security enabled on all my wireless devices.  The amplifier Wireless G does not mention if it can use the WPA2 security.  Only WEP.

  I have to downgrade my router security to WEP to use the Extender to put away or will it be compatible with my current security?  Information about the product and FAQ does not cover this subject.

  Thanks for any help.

  You can use WRE54G with router WRt160N... However, WRE54G Range Expander don't support WEP and WPA WPA2.

• Issue with WRT160N v2 and victory. 7

  First of all all good morning to you all - I'm new here

  OK, here's my problem.

  I have WRT160N v2 at home and his job very well.

  Two desktop (wired) and two laptops (wi - fi) worked very well until I decided to try the new Windows 7.

  Now I have a laptop (Dell Studio 1735 with Windows 7) even not see my wireless network, while the other (Dell Inspiron) work very well - as usual. Also, desktop computers connected by cable have a problem with the router at all.

  I don't have any idea what's going on, but any help would be great.

  Best regards

  Vedran

  Have you ever tried setting level or flashing of the firmware on the router?

• Problems with WRT160N and Xbox 360 - please help

  Hello

  I recently bought a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes about 10 minutes to find a game then that in the Hall. I didn't put in the door or disconnected from my profile, there's just a lot of time. It says that my NAT type is open. I've isolated the problem is the router because if I plug in an ethernet cable from the 360 to the DSL modem I find games instantly. I examined the port forwarding and open ports on the 360 and specifically for modern warfare 2 and it was actually my NAT type go as strict, ironic. I have spent 5 hours trying to mess with this and can't seem to make it work right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.

  As your ISP is a provider DSL, most providers DSL has setup their modem in DHCP Mode, so your Modem acts like a router. So, right now, your Setup is NAT behind NAT. So if you try to open the Ports on your Linksys router it does not work as your Modem Hangs only ports.

  So the best way to work is to convert your Modem in Bridge Mode and it will solve all your problems.

• Duplicate name on the network with WRT160N v1

  I get the error "a duplicate name exists on the network" on all my computers.  I just started getting this error about a week ago.  I don't change anything on the network and have had this router WRT160N v1 (with the latest version of the firmware) for about 6 months now.  I spoke with Linksys support and they told me to rename all my computers and reboot the router... which only bypassed the question for 1 day.    In addition to the inconvenience of the error, the only thing it crashes me to connect to any other computer via a mapped network drives.  Print on network printers and internet work very well.

  I wonder if a Windows Update is the cause of this, but not sure.

  Here is my network configuration:

  I have a simple network of peer to peer with 5 workstations and 1 portable wireless.

  All workstations use DHCP except 1 which behaves like a file server with a static IP address.

  All the workstations are XP Pro and laptop is Vista professional.

  WRT160N v1 router DHCP running

  Help or direction would be great!

  I guess when you renamed your computers, you have given a different name to each computer and restarted the entire network after the name change.  If this isn't the case, it is the cause of your problem.

  What LAN IP address static (fixed) do you use for your server?   What is your range of DHCP server?    If you use "DHCP Réservation" to give your server a static LAN IP address, then the address must be within the range of the DHCP server.  However, if you have assigned manually your server an address LAN IP fixed, by entering information in the server, then this fixed LAN IP address must be outside the range of the DHCP server, and it may not end with 0, 1 and 255.

  At least part of your problem (drive mapping) sounds like a problem with computer software firewall.  Go to the software firewall for computer on each computer and set it to "trust", other computers on your network.

  Using an unsecured wireless network?  If so, maybe your neighbor put his computer to use one of your computer names, and it connects to your network (accidentally or intentionally).   If you have an unsecured wireless network, secure it.

  In addition, check the MAC addresses on all your cards, ethernet and wireless adapters and see if both is the same.   Surprisingly, some manufacturers do not give MAC addresses unique to their network devices and perhaps is to confuse the router.

  In addition, you use a wireless Repeater in your network?  Sometimes this problem with duplicated names occurs when a wireless Repeater is used.  Yet once, if you have an unsecured wireless network, maybe your neighbor runs the Repeater of fire!

  Do one of the computers that are connected to the router, also have a wireless adapter?  If so, make sure it's off.

  If you would like more information, please state the brand and exact model of the card number wireless laptop.

• Trouble connecting to internet with WRT160N

  I have problems with internet on my mac mini.  The mac mini is connected via ethernet and is really slow.  Sometimes, it works very well.  Other times looks like 3 tries to load a page.  Sometimes it does not.  You never know.  The thing is my macbook is connected wireless and works perfectly.  The mac mini is even when my macbook is disabled.  He didn't get it until I bought the router, and it worked very well the first days of use of the router.  Any suggestions?

  Is your router WRT160N v2 model? Then check if your firmware is build 11. If so, you should downgrade to build 8. We will be happy to help you with that.

• M4800 Precision: Input lag with a log in, Switchable graphics does not, fan GPU "chirp" when it starts.

  I recently bought a new M4800 for an i7 quad, and a m5100 over-pants GPU. So far, I was rather satisfied with the purchase as it is what I need it to do. However, there are a few quirks that prevent from being 100%:

  When I run the map only descrete, the journal of windows 7 in a such shift except if I move the screen does not refresh: you can type things and no. * display symbols in the password box. If you move the mouse continuously when you type the * poster in real time? It's a weird kind of lag, that I have never experianced before in my life.

  This does not happen with the integrated card. HOWEVER, the computer will not dynamically switch between Intel processors and AMD gpu (amd Enduro / express power) as advirtized. When running in switchable graphics mode drop-down lists of global settings are 100% Virgin in the Panel of the CCC.

  If you manually set for each application: it performs either one of two things:

  (1) most games seem to run fine, however he follow up with ESTR indicates its operation on the intel HD GPU and performance decreases significantly in the reflection of this...

  or (2) launches a professional software as Chief Archetect x 6, or SolidWorks2014 causes the display to hang, fans of cut and the computer did nothing until a hard reboot via the power button.

  * I disabled the Integrated GPU in the bios and run only the AMD card as a work-around. Is there any solution for this other than to ignore the Intel card? Googling around leads me to a resource that graphic dell switchable disbling in BIOS are the only work around. All the programs work very well in this way, but sometimes say on a trip or during a course of reading, I don't see a reason to keep the amd WHAT GPU powered.

  Soruce to work around www.dell.com/.../EN

  Is this fixed in a future bios or update driver?

  and finally: the computer is dead silent most of the time, even the fans are pretty quiet. However when the GPU kicks fan on after being off for a long time, there is sometimes a noise, I can only describe as "electronic chirping/scraping" until the fan whirrs to life, it affects not at startup, but randomly as you use on battery and plugged. the configuration management thermal "maximum performance" to keep the fan on all the time to a certain extent eliminates noise. Is this normal? or is this a problem?

  My personal experience has been a long and trying a.  First, they sent a technician to replace the graphics card with an another week.  Has not made a difference.  While they had tech replace the motherboard.  No difference.  So, I insisted on a new m4800 with the nVidia processor.  That's how I got mine.  BUT I think that if you pushed, maybe they could send a technician to change your graphics card.  Or at least send you a different model (for which you need of course a different driver), then you could install or take to a repair technician.

  For what it's worth, Dell knows they have a problem with this hardware configuration and told me that they raised the question to their experienced engineers.

• Reduce lag with WOT

  I have a problem with lag during playback of World of Tanks online. Is there anyway to improve the performance of Windows 7 by changing the settings?

  The more you can do with Windows is to run an optimized system. That basically means reducing the number of starting applications and Services you do not use. Turn off unnecessary startup Apps is the best tweak of the two.
  You can find these articles by typing - msconfig - in the command run from the start menu.
  For more information on the Services go-
  Start-Administrative Tools-computer management and find the Services tab.
  Each Service has a brief description of what it does. Only disable or stop the services, you are sure that your system does not use.

  The boot using minimal is a means of diagnosing background processes that might slow your machine down or conflict with games/software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Also, be sure to keep your HARD drive defragmented and run frequent disk cleanup to keep the Temp folder to become too large.

  My understanding is that WOT is a cpu intensive game, so you need a good processor if you want to transform a part of the in-game settings.
  Of course your graphics card must also live up to start the game with some settings you use.
  If you have mouse lag and V-sync turned on, do not forget to enable Triple Buffering in your profile cards chart for this game or simply to turn off V-sync in the games settings.

  A great possibility for delay could be servers online games are not the traffic they get, or your own internet connection is not fast enough or you play the "ping" the server is too high.

  The forums of World of Tanks would be a good place for more information specific to the game.

  .

• Problems to use LAG with 2504 and 3560

  Hello, we recently bought a 2504 wireless controller, and I can't using the aggregation of links (LAG) to connect the WLC to the network.   I was able to connect properly to the contoller using a single link, but as soon as I activate LAG (on the switch and wlc) I'm unable to access the controller.  I think that I have the correct position of the switches as the port channel is active and shows active on the controller via cdp.

  I can't do a ping of the controller, but I see it via cdp.

  The controller runs 7.4.100.0 with bootloader 1.0.18

  The switch is a WS-C3560G-48PS and running 12.2 (25r) SE

  The controller is 10.10.10.202.

  No access-lists on interface vlan switch

  Note that I have currently the 2nd stop of the port as the first member of the Association is active.

  Thoughts?   Any help would be appreciated.

  Thank you

  Bryan

  #sho ip arp 10.10.10.202

  Protocol of age (min) address Addr Type Interface equipment

  Internet 10.10.10.202 143 5478.1aad.1f0b ARPA Vlan1

  #sho address mac-address-table 5478.1aad.1f0b

  Mac address table

  -------------------------------------------

  VLAN Mac Address Type Ports

  ----    -----------       --------    -----

  1 5478.1aad.1f0b m 1 DYNAMIC

  Total of the Mac addresses for this criterion: 1

  #sho cdp neighbors detail

  -------------------------

  Device ID: wubc_wlc

  Workshop / entry:

  IP address: 10.10.10.202

  Platform: AIR-CT2504-K9, capacity: host

  Interface: GigabitEthernet0/40, ID of Port (outgoing port): GigabitEthernet0/0/1

  Hold time: 153 s

  Version:

  Name of the manufacturer: Cisco Systems Inc.  Product name: Cisco Controller Product Version: 7.4.100.0 Version RTOS: Erro Bootloader Version: 1.0.18 Type of Build: DATA + WPS

  version of the announcement: 2

  Duplex: full

  Workshop / management:

  -------------------------

  Device ID: wubc_wlc

  Workshop / entry:

  IP address: 10.10.10.202

  Platform: AIR-CT2504-K9, capacity: host

  Interface: GigabitEthernet0/40, ID of Port (outgoing port): LAGInterface0/3/1

  Hold time: 148 s

  Version:

  Name of the manufacturer: Cisco Systems Inc.  Product name: Cisco Controller Product Version: 7.4.100.0 Version RTOS: Erro Bootloader Version: 1.0.18 Type of Build: DATA + WPS

  version of the announcement: 2

  Workshop / management:

  # sho etherchannel summary

  Flags: D - low P - port-channel

  I have - autonomous s - suspended

  H Eve (LACP only)

  R - Layer 3 S - Layer2

  U - running f - cannot allocate an aggregator

  u - unfit to tied selling

  w waiting to be aggregated

  d default port

  Number of channels: 1

  Number of aggregators: 1

  Protocol for the Port-Channel port group

  ------+-------------+-----------+-----------------------------------------------

  1 Po1 (SU) - Gi0/40 (P) Gi0/42 (D)

  #sho run IM int 0/40

  Building configuration...

  Current configuration: 123 bytes

  !

  interface GigabitEthernet0/40

  switchport trunk encapsulation dot1q

  switchport mode trunk

  channel-group mode 1 on

  end

  #sho run IM int 0/42

  Building configuration...

  Current configuration: 133 bytes

  !

  interface GigabitEthernet0/42

  switchport trunk encapsulation dot1q

  switchport mode trunk

  Shutdown

  channel-group mode 1 on

  end

  #sho run int port-channel 1

  Building configuration...

  Current configuration: 92 bytes

  !

  Interface Port - Channel 1

  switchport trunk encapsulation dot1q

  switchport mode trunk

  end

  Make sure that your markup of the wlc management interface.

  Sent by Cisco Support technique iPhone App

• Chronology of Lag with AVCHD (MTS) files

  We have been editing with AVCHD MTS files for years without any problems.  In the last week we have timeline lag when editing.  When the timeline scrub the video pauses for 30 seconds before starting again.  He's playing very well until you stop it.  Move to another part of the timeline and you sit and wait.

  We test and all passed: processor, hard drive, RAM, video card

  System:

  Windows 10

  OS & software on SSD, media on separate disk

  CPU Intel I7 4930K

  T.I. card video GeForce GTX 780

  32 GB OF RAM

  Hello

  Please go to Edit Menu of Premiere Pro > Preferences > Media and uncheck the option "Enable accelerated h.264 decoding Intel."

  Once done restart Premiere Pro and check the performance.

  Vinay

• ESXi 5.5 nic teaming/LAG with trunking does not but it works on ESX 4.0.  Both are on the same switch. What gives?

  I have two hosts (vhost1 = ESX 4.0, vhost2 = 5.5 ESX) both are configured for the Group and both connected to a switch of 1544 Adtran L3 (named sw01).  vhost1 has been in production for several years with the config below and has been solid as a rock.  I'm trying to reproduce the installation of grouping/collage on vhost2 and it does not work when are associated but will work when you are using a single NIC (with or without aggregation).

  To be more specific about what does not work, two virtual servers have "Network server" (vlan 8) defined as a group of ports. Both physical and virtual servers on the same vlan cannot ping or resolve queries arp for virtual machines on vhost2.    Everything that is sent from a different subnet can connect to the virtual machines on each virtual server.

  So the question is this: why not ESX 5.5 works as ESX 4.0 when the configs are also near identical, as I can make them and they are connected to the same switch?

  Thanks for any input you can provide!

  S

  This is the configuration for vhost1

  switch 1 (sw01)

  SW01 #sho run int port 3

  Building configuration...

  !

  !

  interface port-channel 3

  Description LAG for vhost1

  no downtime

  switchport mode trunk

  switchport trunk allowed vlan 1.8

  !

  end

  SW01 #sho run int 0/23 concert

  Building configuration...

  !

  !

  0/23 gigabit-switchport interface

  Vhost1 vmnic2 vswitch1 description

  no downtime

  channel-group mode 3 on

  !

  end

  SW01 #sho run int concert 0/24

  Building configuration...

  !

  !

  0/24 gigabit-switchport interface

  Vhost1 vmnic1 vswitch1 description

  no downtime

  channel-group mode 3 on

  !

  end

  vhost1

  [root@vhost1 ~] # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 03:04.00 tg3 up to 1000Mbps Full 78:e7:d1:5f:01:f4 1500 Broadcom Corporation NC326i PCIe Dual Port Gigabit Server Adapter

  vmnic1 03:04.01 tg3 up to 1000Mbps Full 78:e7:d1:5f:01:f5 1500 Broadcom Corporation NC326i PCIe Dual Port Gigabit Server Adapter

  [root@vhost1 ~] # esxcfg - vmknic - l

  Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type

  vmk1 VMkernel - Server NetIPv4 10.1.8.31 255.255.255.0 10.1.8.255 00:50:56:78:9e:7e 1500 65535 true STATIC

  VMkernel - SAN Net IPv4 10.1.252.20 vmk0 255.255.255.0 10.1.252.255 00:50:56:7 c: d8:7e 9000 65535 true STATIC

  
  

  [root@vhost1 ~] # esxcfg - vswif - l

  Port Group/DVPort IP IP family name address Netmask Broadcast Enabled TYPE

  Service vswif1 - NetIPv4 management 10.1.1.12 console 255.255.255.0 10.1.1.255 true STATIC

  
  [root@vhost1 ~] # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  32 4 32 1500 vSwitch0

  Name PortGroup VLAN ID used rising Ports

  0 3 VM network

  Switch name Num used Ports configured Ports MTU rising ports

  vSwitch1 64 12 64 1500 vmnic1, vmnic0

  Name PortGroup VLAN ID used rising Ports

  Server network 8 7 vmnic1, vmnic0

  Console - management service vmnic1 Net0 1, vmnic0

  VMkernel - server 1 vmnic1 Net8, vmnic0

  On the Load Balancing vSwitch it Hash IP value.

  This is the configuration for vhost2

  switch 1

  SW01 #sho run int 4 port

  Building configuration...

  !

  !

  interface port-channel 4

  LAG description for vhost2

  no downtime

  switchport mode trunk

  switchport trunk allowed vlan 1.8

  !

  end

  
  

  SW01 #sho run int concert 0/17

  Building configuration...

  !

  !

  0/17 gigabit-switchport interface

  Description vhost2

  no downtime

  channel-group mode 4 on
  

  !

  end

  
  

  SW01 #sho run int concert 0/18

  Building configuration...

  !

  !

  interface gigabit-switchport 0/18

  Description vhost2

  no downtime

  channel-group mode 4 on

  !

  end

  vhost2

  ~ # esxcfg - NICS - l

  Name PCI Driver link speed Duplex MAC address MTU Description

  vmnic0 e1000e up to 1000Mbps Full 00:25:90:e7:0e:9 0000:08:00.00 1500 c Intel Corporation 82574 L Gigabit Network Connection

  vmnic1 0000:09:00.00 e1000e up to 1000Mbps Full 00:25:90:e7:0e:9 d 1500 Intel Corporation 82574 L Gigabit Network Connection

  ~ # esxcfg - vmknic - l

  Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type

  Management 10.1.1.15 IPv4 network vmk0 255.255.255.0 10.1.1.255 c 1500 65535 real STATIC 00:25:90:e7:0e:9

  ~ # esxcfg - road - l

  VMkernel itineraries:

  Interface of network gateway subnet mask

  10.1.1.0 255.255.255.0 subnet local vmk0

  by default 0.0.0.0 10.1.1.1 vmk0

  
  

  ~ # esxcfg - road - n

  Expiration type neighbor Interface MAC address

  10.1.1.1 00:a0:c8:8 has: ff: 3 b vmk0 19m13s unknown

  ~ # esxcfg - vswitch - l

  Switch name Num used Ports configured Ports MTU rising ports

  vSwitch0 4352 7 128 1500 vmnic0, vmnic1

  Name PortGroup VLAN ID used rising Ports

  Server network 8 1 vmnic0, vmnic1

  Management network 0 1 vmnic0, vmnic1

  On the Load Balancing vSwitch it Hash IP value.

  Hello

  Do you share the vmnic for ESXi management and network of the VM?

  Try to follow the steps in this KB: VMware KB: NICs using EtherChannel grouping allows intermittent network connectivity in ESXi

  Trying to team adapters using EtherChannel, network connectivity is disrupted on an ESXi host. This problem occurs because grouping NIC properties will not propagate to the network management portgroup in ESXi.

  When you configure the ESXi host for grouping of NETWORK cards in attributing to the road based on ip hashload balancing, this configuration is not propagated to the portgroup management network.

  Workaround

  Note: to reduce the possibility network loss please change the route based on the hash of IP using this method of balancing load vSwitch

  1. Close all ports in the physical switch team leaving a single port as active.
  2. Change the Route based on ip hash vSwitch and load balancing management Portgroup.
  3. Set up the physical switch port channel.
  4. Activate the physical switch ports.

  Notes: Using this method will avoid a loss of connection when you switch to a port channel. Also make sure that under the properties for vmk portgroup # used for network management you tick the box "Enabled".

• Windows lag with P20 / P25

  Hello!

  I have an environment that is running well. but I have an annoying problem, and it's when you drag a window on the screen as the pointer, and then the window (choppy and yes)

  However, when you run the same office with a view all Client software is smooth!

  How is that? Shouldn't the P20 / P25 be better?

  I wish I could explain it better, but I hope someone has a solution...

  Finally, now Teradici has found a solution to my (and other) problems regarding windows lag compared to the chipsets TERA1!

  SCENARIO:

  Although there are many factors that determine the performance of office (for a list, see troubleshooting steps general - poor performance on virtual desktop (15134-932)), lower performance of window drag can be observed in the following scenario:

  • Virtual desktop VMware view Horizon 5.2
  • APEX 2800 is not installed or hardware acceleration is not enabled for the virtual computer
  • Tera2 double zero display customers running firmware 4.1.0

  In some cases there may be PCoIP zero client journal entries such as: LVL:1 RC: MGMT_IMG-500: (pkt_rx_resource_check): lack of Imaging Resource. Removal of imaging data. Workaround: This will be addressed in a future firmware release.  To work around this problem, determine if the codec of color is the issue, configure the following registry as shown below key to see if the problem goes away. PCoIP.enable_new_color_coding 0 The registry key is a DWORD value. Note: Make sure that you have the necessary safeguards in place and are familiar with editing the registry before proceeding. To change the registry key:

  1. Click the Windows Start button and type regedit in search programs and files.
  2. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Teradici\PCoIP\pcoip_admin.
     (If you do not see the "Teradici' key and the following keys, you will need to create them)
  3. Add the new DWORD value and name it pcoip.enable_new_color_coding.
  4. This gives a data of 00000000 and click OK.
  5. SE disconnect/reconnect your PCoIP session for the change to take effect.

  In my case I also had to disable Image caching, same location: pcoip.enable_temporal_image_caching REG. DWORD 0

  Now, the TERA2 behaves and works as well as does the TERA1!