LAN 4402 wireless controller

Similar Questions

• Helps to configure a Cisco 4402 wireless controller

  Hello

  I need help setting up a Cisco 4402 Wireless Controller. I want to have users automatically connect to the wireless network, but not to have access to all the resources network until they open a web browser and provide their domain user name and password or a guest account provided by the receptionist.

  I tried many different configurations but can't seem to make it work properly. More time then not when I put on the WIFI network security it causes my wireless network to disappear from the list of wireless avaialbe.

  Here's my network configures:

  1 - 4402 wireless LAN Controller

  2 - Aironet 1130AG antennas

  1 - 5510 cisco ASA

  1 - 4503 core Router\Switch

  8-2960G switches

  Windows domain Server 2003 with RADIUS running on the domain controller.

  Thanks in advance for the help.

  Glad you got it working...

• 4402 wireless controller and the 1130AG access points

  I have a bunch of 1130AG (35) and 1231 points of access. I just bought a controller 4402 so I could handle these much easier access points. I currently have the offline access points, so I could control. With the wireless in the mix controller, that I have to fix these to light mode or can I leave them offline.

  We know not the operating instructions so I can leave them in stand-alone mode. Most of them is in the rafters in our warehuse, and I didn't have to pull of these if I have to. If I can use them offline, how can I do that?

  Thanks much for any info!

  Dave

  Hi Dave,.

  A WLC manages autonomous APs.
  So if you want to centralize the management of your APs through the WLC, you will need to convert it to light and enter them on the WLC.

  To convert the lightweight access points, you can choose between several options:

  1. thanks to a specific upgrade tool that you could install on a PC:
  http://www.Cisco.com/en/us/partner/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html

  2. [the most evolutionary] by WCS, with a model of migration that could apply to several APs:
  http://www.Cisco.com/en/us/docs/wireless/WCS/7.0/Configuration/Guide/7_0apcfg.html#wp1054876

  3. [not in any book] by the following steps:
  3 (a) download the CEC lwapp recovery image and store it on a TFTP server.
  3 (b) Telnet to the stand-alone PA and issuing the following command:
  Archive Download-sw / overwrite/reload tftp: / // [lwapp recovery image file path]

  As a general recommendation, before to convert the lightweight access points, you can be sure that the wired infrastructure behind is ready to direct them to the WLC for recording.
  It's suggestions explained in the link on the above option #1.

  Hope this helps,

  Fede

  --
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• 4402 wireless Controller - Source of IP Communications - what is - this?

  My client has a controller 4402, which seems to be at the origin of a TCP request on the port of 2006.

  Their edge router blocks the communication with an acl.

  Here are two entries in the router log:

  Apr 26 16:30:55: % s-6-IPACCESSLOGP: list of inside denied tcp 192.168.1.5 (2006)-> 66.227.171.165 (64344), 3 sachets

  Apr 26 16:32:55: % s-6-IPACCESSLOGP: list refused tcp 192.168.1.5 (2006)-> 124.115.11.71 (42315), 6 packs of college

  192.168.1.5 is the management on the controller interface.

  The destination is not always the same.

  Any thoughts would be helpful.

  Thank you

  Fred

  What is the virtual IP address?

  Definitely looks like this bug then it comes in from the IP Address of the service:

  CSCsw93671 Packets from the service port sent by wlc when not connected

  It has not yet been resolved.

• Upgrade of Cisco Wireless Controller 4402

  We have a 4402 WLAN controller with a bunch of AP in 6 locations. The software is installed on a Windows Server 2003 server - since our society must be in accordance with various compliance agencies, we are in the process of getting rid of all 2003 servers in our infrastructure as they will be supported are more early next year.

  I created a new server (2012 R2) and tried to install, but get the error that it is only supported on Server 2003 or Red Hat.

  Is there a way to get this installed on one different platform other than 2003?

  Thank you!

  Yes, you can keep the same equipment (WLCs and AP).

  I was just saying about upgradation WCS to the CNS / prime infrastructure

  NCC/WCS are just a management for wireless LAN controllers APs. so if you change the WCS to the CNS, then it will affect any service.

  Concerning

  Remember messages useful rates

• 2504 versus 3850 wireless controller

  We are just beginning to look at wireless on our secure networks. We have a 2504 and some WAP 36xx but never installed. We also ordered a couple of 38xx WAP and group the 3850 templates which included the wireless controller. We plan use our Cisco ACS with CERT and AD for authentication.

  We're finally going wireless at several sites of fiber attached if cela pans.

  To save time by going down the wrong path, I have some basic questions to ask.

  My questions are... what (2504 versus 3850 WC) approach is better?   I know the 3850 series may have mulitgibit connections to WAP with the newest 3850 model x, which can be a more thereafter. I also don't know the process of how data is placed the user wireless via the WAP to the local network. Data must tunnel through a tunnel of IPSEC for the 2504 and then placed on the local network to the location of 2504?  Or is this just tunnel for authentication and wired LAN between WAP and switch allows direct data flow?   We have a few wireless on our network, but we use a totally different method.

  What bothers me is that if there is a certain wireless access to a corporate network and servers I think 1 GB for the WAP connection could be a bootleneck... esp if the data can not be placed right on the local network to the WAP connection to the switch.

  A 3850W model controls the only devices on the local stack or it may go beyond this restriction too? I mean, it's can support 3850W THAT connected to another WAP stack too?

  I would not use the 3850 unless your environment is weak, that being said, the 3850 and the AP must be on 3850 or 3650 in your environment. I'd go with the 2504 his stable and you will not regret it :)

  -Scott

  Please evaluate the useful messages *.

• Wireless controller Cisco 526 & AP AIR-AP521G-A-K9-Question

  Hello

  We have several AP 521 in our headquarters main building as well as our remote branches, totalling about 16 AP, four in our main headquarters office and one in each brachh distance.    All AP at this moment are stand-alone devices.

  We are contemplating centralized management of ALL our AP devices implementing this controller 526, where we can handle easy to access list of mac or other parameters.

  Here are my questions based on reading some documents based on 526 controllers:

  1. I undersland these models AP and 526 controller model are EOL, - what are these end of Support - at this time we are not planing to migrate to the new AP devices yet, maybe in 2-3 years on the road, but definatetly SmartNET is a must on these.

  2. for 526 be able to handle any device of AP, is the peripheral access point must be converted on KNEES, is that correct?

  3. as I read, 526 controller can support up to 6 devices AP 521, if this is the case for example... I can say install a 526 to the main AC controller which has only FOUR peripheral wireless AP and be able to manage also the 2 more devices AP of REMOTE offices that are not directly connected to main office switches HQ but to have connectivity that are across our links WAN MPLS or (wireless AP) should be directly connected to the LAN so that the 526 be able to manage devices, if possible, then that would allow me to implement 3 526 controllers in the HQ Office to handle all 16 devices AP of our entire company... Please correct me if that's not true.

  4. and finally, for example, say I have MAC ACL applied to each AP devices, now with the 526 controller if we go about using centralized management would be that I could create a MAC acl and indicate to the Scheduler to propagate the ACL to the devices all THE AP which are under its management?

  Thank you for your help

  Concerning

  1. This is the end of life announcement:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/end_of_life_c51-568040.html

  2. Yes, LWAPP APs are easier to manage from the 526:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7306/ps7320/ps7339/product_data_sheet0900aecd8060c22b.html

  3. you will be well on MPLS for AP to join a remote control. You may need to change the MTU if you have problems with the junction of AP.

  However, remember that if you are MPLS connection goes down, you lose connectivity, so it is a design decision to make.

  4. in the list of features, you should be able to:

  http://www.Cisco.com/en/us/docs/wireless/controller/526/1.5/configuration/guide/A3_feature_list.html

• 2000-2314TU HP: not able to connect to the LAN and Wireless network

  Hello

  I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

  You are the very welcome.

• Cannot install drivers LAN and Wireless Lan on my Satego P100-10U

  Hi people =)

  II just reinstall WIndows XP Professional on my Toshiba Satego P100-10U.
  I downloaded all the drivers from the Toshiba page and he burned them on a CD.

  I inserted the CD in my computer and installed most of the pilots. But for
  a stranger strange reason drivers network such as LAN and Wireless Lan
  drivers do not work!

  Can someone help me?

  Don't work or you can not install them?

  LAN driver must be installed manually because there is no setup.exe file. Go to an unknown device in Device Manager > properties > driver installation and navigate to the folder where you extracted the driver files.

  Please let me know if it works.

• How to know ULTIMATE HORIPAD game wireless controller have full powers?

  How to know ULTIMATE HORIPAD game wireless controller have full powers? It works very well, the only thing is, I have 3 hours of charging with the USB lighting power cable, the cable is working fine, but the led on the controller always alone on (the first). supposed to be four lights right? It of my first game controller, just bought today, so I don't know how my game controller something bad or something do not know how to look.

  Please help me

  ULTIMATE HORIPAD game controller

  There isn't really anything to do with Apple TV, but I'll try to help

  There are 4 LEDs on the controller?

  The manual for controller tells how long it takes to fully charge?

  Have you tried to load all night?

• Where is the serial number Xbox 360 Wireless Controller?

  Where can I fint Xbox 360 Wireless Controller serial number?

  Hello

  Click on the link and see if it helps.

  How to find the Xbox product serial numbers

  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-Setup/serial-number

  You can also contact Xbox support.

  Welcome to the Xbox support

  http://support.Xbox.com/en-us/

• Xbox wireless controller not connecting with PC, please help

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Hello

  Setting up Windows Media Center

  To use Windows Media Center with the Xbox 360, you must have a computer running Windows Media Center. Windows Media Center is included with the following versions of Windows:

  ·         Windows 7 Home Premium or full, professional edition

  ·         Windows Vista Ultimate or Home Premium

  ·         Windows XP Media Center Edition 2005

  Step 1: Get the key Setup of Xbox 360

  1. on your console, go to My Xbox , and then select Windows Media Center.

  2. follow the on-screen instructions.

  3. write down the 8 digit Media Center Setup key.

  Step 2: Add an Extender on your computer

  1. start Windows Media Center.

  2. click on tasks, and then click add Extender.

  3. When prompted, enter Xbox 360 8-digit setup key.

  4. complete the configuration of the Extender

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Xbox 360 Wireless Controller is compitable with Windows?

  Hey, I have a question, does the Xbox 360 Wireless controller compitable with Windows too?

  Please help me.

  Hi Destinyhope,

  Yes. Xbox 360 wireless controller is compatible with Microsoft Windows.
  For more information and assistance on the Xbox 360 wireless controller, click on here.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Battery wireless controller

  OK, I admit, I am not too clear, but this is the first time that I have been unable to figure out how to install a battery. I just got a camcorder VIXIA HF G30 and was beaten by the wireless controller battery compartment. No matter what I try, I can't get access to insert the battery. You would be grateful for the help, thanks.  Ted

  Hello tevans9129,

  The WL - D89 uses a CR2025 button-type battery.  It is located behind the battery tray which slides down.  To open, hold the remote in the right hand (covered on his back) and hang the nail of your left index finger in the small lot, which acts as a spring and pull toward you.  At the same time, use your right thumb nail to pull down the battery broke.  This will allow you to change the battery.

• 6030a HP MFP: HP Wireless Controller (map) pcb for HP 6030 has

  Can I install

  HP Wireless Controller (PCB) on a HP 6030 MFP printer?

  If Yes, what would the model/serial number please

  Stephen is correct.  See the link below this map works with your printer.

  http://h10010.www1.HP.com/wwpc/pscmisc/VAC/us/product_pdfs/3662193.PDF