LAN causing the reboot of the Satellite Pro P300

Similar Questions

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Satellite Pro P300 - 13 M - how to replace the network card?

  Hello I have the Satellite Pro P300 - 13M.

  My sister fell on my UTP cable and so he was taken out by force and because of that "holding-pings" on the front of the port are bent or broken, so whenever I put in a cable with traction slightess or accidental poke I'm new offline...

  I'm out of my warranty period, is it possible to fix this? Can I replace it myself?
  USB network adapters are a viable solution to replace if I can't replace it?

  Help > _

  To resolve this issue, you must replace the motherboard. The network card or a network location is soldered on the motherboard and cannot be traded.

  In addition, it would be not covered by warranty. This isn't a matter of Toshiba, this is caused by the customer.

  However, if you want to repair you must contact an ASP or search you on eBay for a card mother of second hand.

• Satellite Pro P300-1EC - cannot get wireless to work

  Hello!

  First of all. Excuse me for my English!

  TEC Spec.

  Toshiba Satellite Pro P300-1EC
  Intel WiFi Link 5100
  Windows XP Pro SP3

  I have a big problem. I can't get the wireless LAN working properly.
  And the customer has purchased this computer because his old computer stopped working with WLAN...

  I tried everything I can. And I am a person of educated tech, so I think I should have the knowledge of this, but I do not have.

  Short version.

  1. install the latest drivers. (Also tried more aged)
  2 restart the computer.
  3 WNIC takes about 10 min to find WLAN.
  4. While working perfect with 130Mbps on project N.
  5.i can user logout and change and all.
  6. when I restart I'm back at number 3.

  Long version:

  I installed XP pro since the XP downgrade Cd included and wireless drivers wasn't on that CD so I downloaded them. (And Yes. "This is the correct drivers.)
  After that I installed the driver and restart my computer, I could not find wireless networks. Kind of weird because I have 4 routers/points of WLAN on my company with the range 60-100% and about 3 other public routers without security. I tried to update the drivers to windows update, and WU has found an update for me. I installed driver and the wireless highlight function. I scream YES and restart the computer. Then it stopped working. N° !!!
  I was a little tired on the problem and began installing some other computers that I bought and when I looked the Toshiba computer that I saw that it was connected to my WLAN. Weird, but I thought it worked then I restart the computer again and then his does not work... again! Now, I have analyzedthe problem and it's like that.

  When I start the computer the my WNIC does not any WLAN.
  About 10 min (10m32s) after starting the wireless started working.
  I am able to disconnect and change the user and it still works, but as soon as I restart the computer it stops and I have to wait another 10 minutes. And so on.

  Anyone been trough something like this even if it is not not toshiba or my model?

  Hello

  What is the Satellite Pro P300 - 1EC BIOS is up-to-date?
  Please check everything first.

  You said you are using Draft N did you tried to establish the WiFi connection using other standard WLan as 802.11 A or G?

  I also recommend changing the WiFi channel and try other channels.

  In addition, you can change a WLan option that affects the WLan functionality. You can find these settings in the Device Manager-> card WLan-> properties-> Advanced tab

  Good bye

• What RAM is compatible with Satellite Pro P300?

  Hello

  I have the Satellite Pro P300 (PSPC1E - 002002GR).
  What are the specifications of the RAM?

  Currently, there are 2 GB of RAM
  I want 4 or 8 GB of RAM.

  I have this possible?

  Greetings

  You can upgrade the RAM to 4 GB of RAM
  So you can use additional DDR2 667 MHz 2 GB RAM module (i.e. PA3513U-1M2G).

  Specifications are:
  DDR2 SODIMM 667 Mhz PC2-5300
  Pins: SODIMM 200
  Voltage: 1, 8V

• Satellite Pro P300 has NO stereo Mix in Vista with Realtek sound card

  Hello.

  I have a P300 with Realtek internal sound card and drivers updated.
  I NEED a stereo mixer in the recording devices, but I currently get only a MIC input, even after checking "Show offline and disabled devices."

  Yes, I updated the drivers HD Audio of this site Web and Realtek and still nothing.
  The only other thing that could affect this, but I don't see how I use ASIO4ALL drivers audio in conjunction with the Realtek drivers.

  I'm running Vista 32 bit Edition Home Premium

  your

  Hi mate

  I confused m do you know why?
  Because you talk about audio driver Realtek and sound chip and my knowledge, that the Satellite Pro P300 was equipped with the audio chip Conexant!

  It s NOT the Realtek chip! It s Conexant!

  According my Conexant audio chip experience can't stand stereo mixer in the recording devices!

  Good bye

• Satellite Pro P300-19 q - Windows 7 driver for x 86 ACPI system device

  I am trying to upgrade to Windows 7 Vista professional - he told me that to install Toshiba x 86 acpi - compliant value device for general and logical use - help!
  Where can I get it from? I searched for the last 3 hours - my laptop is the satellite Pro P300-19 q - I am a novice to this - thanks a lot in anticipation

  Hello

  You have already installed the drivers? All what you need you can download on the Toshiba site.

  In addition, you must install Toshiba Value added Package. It contains all the necessary tools Toshiba you need.

• Satellite Pro P300-26U - can I use a second HDD?

  Satellite P300 obligations food raid0 and double HARD drive. All models? Manual of 26U don't say a word on the subject. Model as P300-1BP has double HARD drive.
  Can someone help me? I want to buy a P300-26U in Italy.

  Thank you.
  Guido

  Hi mate,

  Who said that the Satellite Pro P300 takes supported RAID? AFAIK P300 series don't have RAID controller and in the specifications detailed on the Web from Toshiba site I can't find anything about this

  Satellite P300 it of only possible to use a second HDD if it has a second HARD drive connector. You can check it if you remove the second HARD drive. If you can see a second HARD drive connector, you can use a second HDD.

• Satellite Pro P300 - 13 m - boot problem: black screen with 3 beeps

  Hello

  Satellite Pro P300 - 13 m, I bought a few weeks ago and in time, I had about 5 - 6 times the same rear screen when I tried to start the system. When he does this notebook gives 3 loud beeps (not sure what that actually means).

  When he does this I have to press the power button for 5 seconds and after several times doing this that it will show the Welcome screen toshiba... then sometimes it will automatically restart again and I get this annoying black screen again. Most of the time when I wait about 10 minutes and try to do as well the system starts as usual... Yes... very strange thing here.

  To be honest, I don't want to send the laptop for Toshiba once again, as I could use for my business...

  Then. What could this be? I've already updated the latest version of the BIOS.

  Thnx in advance

  Carl

  Hello Carl

  I have the Satellite Pro P300 (PSPC1E). I installed Windows XP Home edition and my Vista. Use the two operating systems with success and everything is OK.

  What operating system do you use?
  Have you noticed that on the first day?
  Your laptop is placed correctly on the desktop without cooling vents?
  When you start Notepad you see every time that Toshiba welcome screen?

• Satellite Pro P300: external resolution 1024 x 768 instead of 1680 x 1050

  Hello

  I run my Sat P300 on XP and this laptop screen is fine (1440 x 900 pixels on radeon HD 3650).

  Now, I want to connect the laptop to an external monitor flat screen, a Samsung, which requires an optimum resolution of 1680 x 1050 pixels.
  The samsung monitor works fine on my laptop more old: I close the lid of the laptop and the screen changes to the Samsung with good resolution of 1680 x 1050.

  Now, when I connect the P300 and close the lid, the screen switches to the Samsung, but the actual screen resolution is 1024 x 768, despite the fact that the 1680 x 1050 is set in the display properties windows.
  In fact, the screen is probably 1680 x 1050, but sees only the monitor 1024 x 768 (i.e. the desktop is bigger than the monitor can show, and I can push the office left/right or up/down with the mouse.

  So it appears (Hey, it's just a guess) that the radeon sends a screen 1680 x 1050 with the wrong frequency (48.2 KHz instead of 64.4 KHz as my monitor watch)!

  The Samsung drivers are installed, and I've updated the BIOS to 3.40 win, but not a solution.

  Someone at - it an idea?

  Hello!

  Have you checked the manual of the Satellite Pro P300?
  I think you should do this because there you can read why the screen resolution of 1680 x 1050 doesn t work.

  The Satellite Pro P300 supports the following screen resolutions:
  800 x 600
  1024 x 768
  1280 x 800
  1280 x 1024
  1600 x 1200
  1920 x 1440
  2048 x 1536

  Do you not see where is the problem? ;)

  Good bye

• Satellite Pro P300-19 q and WXP downgrade

  Hi all

  I need to buy a new laptop with windows XP on it. I was initially attracted by the Satellite Pro P300-19 q because of its ability to be downgraded to XP. However, I decided to do a quick serach first to see if someone had encountered problems and I saw a few posts where people are having problems with the wifi on them after decommissioning.

  The Satellite Pro P300-19 q isn't my first choice of PC Toshiba laptop and if the downgrade xp disc is not very effective, so I'd probably rather use my own copy of xp and downgrade a portable me (as long as the drivers are on the Web site). Anyone had any experience with these Toshiba recovery DVD to downgrade?

  Thank you

  Hello

  Satellite Pro P300-19 q belongs to the portable model PSPCDE and if you check download Toshiba and support under http://eu.computers.toshiba-europe.com page, you will see that this model of laptop is taken WXP supported.

  I don't know if you will get the recovery media of Windows XP Home edition with this laptop, but Toshiba offers all the necessary drivers, tools and utilities and you can install your own version of Windows XP Home edition.
  You can ask your local dealer if the Windows XP Home edition recovery media is delivered with this media.

• Is it possible to install Vista 64-bit on Satellite Pro P300-1CS?

  Is it possible to install vista 64-bit on the Satellite Pro P300-1CS?
  Best regards
  DUP

  Hello!

  It should be possible to install Vista 64-bit on the laptop but I could be that you will get not all drivers.
  For now, doesn t support and 64-bit drivers Toshiba offers but you can search on other sites:

  Here are some examples:
  -Intel chipset: [www.intel.com]
  -Realtek sound chip: [www.realtek.com]
  -WLAN driver: http://195.182.196.33/wlan/
  -Bluetooth: http://195.182.196.33/bluetooth/

  Good luck!

  Good bye

• Satellite Pro P300 restarts a few minutes after the stop

  Hello

  I'm unable to download the update of the BIOS for a Toshiba Satellite Pro P300 PSPCDE (WIN 3.00), the reason being that I wonder a user name and password to download the file!

  The laptop has this annoying problem to revive a few minutes after the laptop has stopped, and that's why I want to update the BIOS to see if it suits him. Laptop is running XP Pro (downgraded from Vista).

  Ideas how I can get the update of the BIOS and will it solve the strange rebooting problem?

  Paul

  Where are you trying to download the BIOS?
  I always download my updates on the official website of Toshiba and if it doesn't work maybe you should wait a day.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  To be honest, I doubt that the BIOS update will solve this problem. I often read about this problem and you can solve if you disable the wake on LAN function in the BIOS and Windows (properties of the wireless network card).
  Check it!

• Satellite Pro P300 - 23L - horizontal lines on the taskbar

  I have a portable Satellite Pro P300 - 23L.
  Last night it suddenly appeared, about 30 horizontal thin white lines on the taskbar (actually on the bottom half inch of the screen).
  The top 3 or 4 of these lines seem to pulse in a fast and regular way.

  Now, I can barely see the icons in the taskbar, or the button to start in the lower left corner.

  I read on another forum that the problem may be due to a problem of "grounding".
  The charger plug is actually broken and repaired the wiring myself, but that some time previously, so it is possible that a connection is loose or is now was something shorting causing this effect.

  I had to order a new charger but in the meantime would appreciate any assistance in order to confirm or deny that this could be the problem.

  Any advice on how to remedy this?

  Hello

  If the problem would be with the power adapter this lines should NOT be visible using the laptop with the battery. Right?
  Therefore, it would be really interesting to know if the same lines are visible if the AC adapter is not plugged in.

  But I think that this is unrelated to the power adapter. In my opinion its a display issue or a graphics card problem.
  Therefore, you must connect an external monitor to check it out.
  If the same lines are visible on the external monitor, the graphics chip is assigned the case, it could be a display problem.

• Satellite Pro P300 - hot to get the WLAN driver in my device manager?

  I have a Toshiba Satellite Pro P300 with xp pro. My wlan driver atheros AR9281 does not work. I uninstalled it as suggested by Toshiba
  and downloaded a new. How can I get the download open and in Device Manager?

  Prior to do any create new folder on the desktop.
  Download driver driver and start TC00147200C.exe Toshiba will start extraction of archive
  Click on Options
  Click Browse, and then choose new folder on the desktop
  Click next
  Click Start
  When finished open the new folder and go to the folder XPDrv
  Start the installation with setup.exe and the installation should start

  Can you please confirm if it works?