LAN not working after sleep

Similar Questions

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Satellite A110 - 228 LAN not working after hibernation

  Well, subject says it all, really. Network (wired) LAN does not work after hibernate.

  It seems that it cannot find the DHCP server, so after a while, he gets a 169.* address.

  After a reboot, the network works as usual (Gets an IP address from the DHCP server)

  Tried the usual things, disconnect the cable, disabling the device LAN, the battery or the AC adapter, the behavior is reproducible.

  The wireless network will be restored after a hibernation.
  He needs a little help (right-click on the icon and 'recover' or whatever it is called in English)

  Any suggestions?

  Wilm Boerhout

  In Device Manager, you will find the Lan card. Then, you can select the properties of LAN card. In the local network, properties of the map please select the Advanced tab
  Here you can activate some interesting functions and change for optimal performance.
  You can try to change some changes. Maybe it will work

• Display MX30 satellite will not work after sleep or resume - SOLUTION implementation

  Below I give an answer to this question asked by Eddy_Stock in 2006. I would like to thank and can't get in touch with.
  HIS answer is below and I hope it helps someone who has the same problem... wow... cured!

  Re: Satellite M30X: screen doesn't work after sleep mode

  I had the same problem with a satellite A100. I did the following:

  1. go in Control Panel
  2. in the system select Classic view
  3. go to the Hardware tab
  4. Select Device Manager
  5. open the 'USB bus controllers' (via)
  6 double-click on USB root hub
  7. Select the tab: "Power management."
  8 deselection allow the computer to turn off this device to save power
  9. my computer has several USB root hub. I repeated at 07:54 for all
  10. I rebooted the computer, but do not know if this is necessary.

  After that, the problem was gone. Enjoy

  Thanks for sharing this info with us

  I think that you thread and the solution could help other users with similar problems

  Thanks again

• Qosmio G30-195 - infrared receiver does not work after sleep

  Hi all!

  I have a problem on my laptop after Exchange of service of the motherboard.
  Once I booted Windows (Microsoft eHome transceiver) IR receiver works well in all programs, but when the system resumes from sleep mode, the IR receiver unloads from memory and can not find the search for material.

  If the remote control does not work until I have to restart Windows. Windows XP SP2 and Windows XP MCE behave the same. Before the exchange of motherboard I didn't you have a problem.

  What can I do with this?

  > What can I do with this?
  Contact service again and tell them the same thing. They need to know why this happen.

  By the way: you can use other USB devices connected after waking from sleep mode?

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Satellite U940 - backlit keyboard does not work after sleep

  If my computer goes to sleep the light most of the time does not work. CTRL-Z is nothing.

  I have reset the values by default and still no luck. I need to reboot to get it to work again.

  I see it as one problem for others:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70512

  Looks like you have created several post on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71599
  Recommend to follow a thread to avoid misunderstandings.

• L540: Microphone is not working after sleep 10 Windows

  I'm new in the thinkpad family and I recently had a L540.

  I decided to put my system with W10. My problem is that of the object.

  When the laptop awake the microphone does not work. It is recognized by Windows, but the cannot hear anything.

  I tried to reinstal the drivers or dissable the unit, but nothing.

  It only works after the restart.

  Any suggestion?

  Thanks in advance.

  Problem solved with the BIOS update!

  Thank you very much.

  Bests.

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however

• Wireless LAN not working after restart

  Hey

  My all new laptop suddenly deleted earlier today and when I restarted it I noticed that my wifi is not working. It is also asking me to install a new driver, the network controller? I'm confused that everything worked well and all of a sudden it's not. Someone at - it ideas? :-/

  Before you try to install any test pilot to roll back OS to an earlier time using System Restore tool.

• X 240, fingerprint reader not working after sleep or lockscreen

  Hi all

  I have a new X 240, and the fingerprint logon no longer works when the computer comes out of standby or a lockscreen (screen saver). I checked other solutions here and on other sites, namely:

  1 uncheck the option of the power of the drive in the Device Manager, fp

  2 and waiting for 30 days of switching within the parameters of Lenovo

  None of these solutions have worked. I have the latest version of BIOS and FP driver. I did ensure that the public Service has been enabled in the BIOS, and I even changed the settings to only allow internal reader to FP. Yet, the public Service will work when I first power on the laptop, but not after the stand-by recovery. I checked in Device Manager after you manually enter the password, and it is said that the PC is up and running.

  I am at a loss, and I want to exhaust all possibilities before calling tech support. Any suggestion would be appreciated.

  Fixed.

  I usually use system update to check for new versions of software from Lenovo. Don't take SU that he had a new version of the reader of the public Service. Just to be sure, I checked on the Lenovo Web site and now there is a newer version of the player FP. I had to download and manually uninstall the previous version. He is fine now. However, I do not understand why Lenovo-why doesn't SU hang updates? It is not the first time this happens, moreover, neither is it limited to this laptop (I own or have owned a T60, X 61, X 200, X 201, X 230, T410 and now the X 240).

  In any case, the public Service works correctly now. I hope this helps someone else.

• Tecra S1 keyboard does not work after sleep

  I started using an edition of comfort Office Microsft wireless as an external keyboard and mouse.

  When my Tecra s1 will switch to standby mode standard internal keyboard stops working. So, I can not enter the startup password.

  The external keyboard is listed as connected even when it is not.

  Any ideas?

  Hello

  Has this issue occurred until you used the external keyboard?
  My suggestion is the edition of Office Microsoft Wireless comfort has a bad influence on the internal keyboard.

• Satellite Pro L20 - LAN not working after install OS re -

  Recently, I replaced my hard drive and I used the drive recovery product etc.

  WXP loaded perfectly and now my wired LAN doesn't seem to work. What it gives me limited connectivity or none.
  I tried to uninstall and reinstall the drivers, manually enter the IP settings and still nothing will work.

  I was wondering if anyone else has had this problem before and that he could offer me any advice.

  Thanks in advance

  M8KWR

  Maybe you should check your settings to your router. Maybe some bad DNS, subnet mask, etc.

  Already checked the cable? Maybe the cable is defective. Any overlap it with another cable.

  Would like to get feedback on your part.
  Also what operating system are you using?

  Greetings

• Mute does not work after sleep/hibernate in Windows Media Player

  I put Windows Media Player to mute. The little volume icon has the circle with the line through it.

  Volume cut appropriately.

  When I put my computer in hibernation and wake him up then again once the icon has yet the circle with the line through it, but DESPITE the volume being set to mute, he plays audio at full volume!

  I tried Windows Media Player in the mixer Volume of inhibition, but the 'secret' setting it seemed to return to reactivated after waking from hibernation.

  I ran to the resolution of the problems of audio playback, but he could not find any problems.

  Conducted a search for the update drivers but all drivers are up to date.

  My sound card is integrated "Realtek HD audio".

  Any ideas?

  Hello R,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This issue has started happening recently?
  2. You did it of any significant changes to the computer before this problem?
  3. You get a related on Windows Media Player (WMP) error message when you wake the computer after hibernation?

  I appreciate your efforts to solve the problem and suggest you try the following methods to diagnose problems with the Windows Media Player (WMP) and check if they are useful.

  Method 1:

  Run the troubleshooter in Windows Media Player and check if that helps. This utility checks the configuration settings and network for Windows Media Player to ensure that you can play the content you downloaded and saved on your computer, or content streaming over a network or the Internet.

  Here are the steps to run the troubleshooting Windows Media Player settings Troubleshooter:

  a. press the Windows key + X , and then select Panel.
  (b) in the search box, type Troubleshooting , and then click on troubleshooting.
  c. click on show all and then click on settings of the Player Windows Media.

  If the problem persists, try the following method.

  Method 2:

  Try to run WMP on and off the media feature and check if the number is reproduced.

  1. Press the Windows key + X.
  2. Click programs and features.
  3. Click Windows turn on or off features.
  4. Extend the functionality of media.
  5. Clear the check box for Windows Media Player.
  6. Click Yes in the warning message.
  7. Reboot your system.
  8. Repeat steps 1 to 4.
  9. Check the box for Windows Media Player.
  10. Click Yes in the warning message.
  11. Reboot your system.

  Check if the problem persists now after the wake up the computer after hibernation.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.