language in Setup before Windows

Similar Questions

• How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

  I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

  After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

  The only valid technote, I found the issue was http://support.microsoft.com/kb/258496. The below is the list of the things that I tried after reading this technote - but no avail.

  • Of course, I tried to restart.
  • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
  • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
  • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
  • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
  • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

  Everything I try seems to have no effect on the resolution of this problem.

  Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

  Kind regards

  Alex.

  ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

  -Tried but not given to impact.

  ... "Step 2: System File Checker tool"...

  -Tried but not given to impact.

  ... "I would have you check the same DVD on another computer and check if it works. '...

  -The only other machine that I use Ubuntu. My other half uses only his Mac.

  I managed to work around this problem by using the following workaround solution:

  I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

  The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

• problem starting before windows starts

  Hello world

  Recently I bought HP Z220 Convertible Minitowers Workstation which is more than good. Windows starts in 20 seconds. What worries me is that when I bought the computer, the startup procedure was really fast. After a some time during the early (before windows starts) appeared onscreen HP saying "Press any key to Option ROM Messages and ESC to enter the configuration menu". It's really annoying because it is there for 1 minute and then the operating system starts.

  I tried to change in the first menu via the shortcut CTRL + S, but without success. When I clicked on disable, it's just gone, and now I can not ge it most.

  Then I entered in the BIOS and in advanced option, I have managed to disable ROM prompt messages. This one missing at the start, but the second saying "Press ESC to enter the menu setup" is still there. I'm worried that if I disable it, I won't be able to return to the menu setup.

  Is there a possibility to reset these startup options? Restore the default values in the BIOS did not help.

  Thank you

  Joe

  Hello Snakey100,

  Welcome to the forums.

  Your system is one of our business models.

  Your question will be better answered it on our business forums.

  Here is a link to the forums.

• Tecra A3x hangs at "Setup starts windows" during the XP installation

  Hi again
  I posted another thread on this laptop. This question was cured by adjusting the correct CPU.

  So, now everything seems fine. Everything seems to work except very well.
  During the installation of XP, the drivers all will charge them and then we get the text 'Setup starts windows' the lower left of the screen.
  It does not further, just sitting there.

  I googled this problem and read many old threads on the subject, I went to the Microsoft website too.
  So far I tried (on the basis of these old threads)

  Different installation discs
  Different memory
  Disable (in bios) that anything not reqd such as Lan
  Reset the default bios settings
  You press F5 when invited to press F6 for scsi drivers. From there, I tried different setting options.

  The current bios is 1.30, I understand there is a update available for 1.4 but it is a basic installation Win rather than back may be done without THAT installed XP.

  Suggestions for what the problem maybe?

  Hello

  What version of Win XP you try? Win XP contains the SP3?
  Please include to the Win XP SP3 using a tool called nLite and then try to reinstall Win XP.

  AFAIK the Tecra A3x support a common IDE HDD so no driver RAID or SATA is necessary.

  You can also check the HDD of the Tecra.
  Use the tool called Drive Fitness Test to test the HARD drive

  Good luck

• I bought my new laptop exactly a month before Windows 7 was released and standard for all new laptops. Am I entitled to upgrade to Windows 7 for free or at least some discount? __

  I bought my new laptop exactly a month before Windows 7 was released and standard for all new laptops. Can I upgrade to Windows 7 for free, or at least some discount?

  Thanks in advance,
  Donat

  Contact the manufacturer or ask in this forum instead: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP Setup hangs at «Setup starts Windows...» "after all the required drivers on the CD loading.

  My Pentium III 1.0 GHz computer (394 MB of RAM, disk hard 500 GB) crapped out on me after that I loaded soft PicturePerfect of Nikon.  For some reason, the Nikon software ruined my registry.  Now, whenever I turn on my PC, I get the BSOD with error "Unpaginated IPF in space".   I can't start my computer in safe mode or "start Windows normally" as I get the same error msg almost immediately without seeing the Windows logo and progress bar.  I can start my PC using the "last good known Configuration" and he will be starting the Microsoft Windows logo with the progress small downstairs bar, so I know that the hard drive is fine.  Then the screen goes black while WinXP is loading from the hard drive, and then the BSOD with error page comes up.  I suspect that there is incorrect data in a critical area of the drive where Windows requires data start correctly.   In the meantime, I can't boot into Windows at all because all Windows options lead to BSOD with the msg of error page.

  I resigned myself to reloading Windows XP from scratch, but I can't seem to get my original installation CD to not work.  I've reconfigured my BIOS to Boot CD, and then start the original Windows XP CD.  He reads and load it all very well, and then it hangs at «Setup starts Windows...» "I thought he had to test the equipment, but it remained in this State for 3 hours!  The "Welcome to Windows Setup" screen never came.

  I thought to use FDISK to the new drive of 500 GB and formatting on the errors on the hard drive, but I can't do since I can't complete the installation process.  I feel stuck in a bad situation where I can't enter BACK to FDISK and FORMAT my C: drive.

  Pls help!

  Thank you!

  Here's what I did and learned:

  1. I replaced my DVD burner with my CD - R original delivered with the machine and disconnected the 2nd CD - R.

  2. I disconnected my 2nd hard drive, in part to minimize the current of the power supply, but also to keep clean and simple start between a (hard) C: and D: (CD - R) drives.

  3. I re-tested my SDRAM using test mode full and deep.  To my surprise, I found not 1 but 2 SDRAM bad!  I replaced the original SDRAM 128 MB and re-directed tests of memory with the Diagnostocs memory of Windows and Memtest86 +.  All the 512 MB of RAM is perfect now.

  4. I started to new WinXP and have the msg «Setup starts Windows...» ».  This time, I waited for about 15 minutes and to my surprise the configuration screen came!  There is a long period of time between the msg «Setup starts Windows...» "at the start, and when the configuration menu actually comes to the screen.  I was able to partition and format my hard drive.

  Lessons learned:
  -Maintain the number of devices to a minimum so that it keeps unknown hardware failures to confuse the troubleshooting questions.
  -Test the RAM in deep test mode is important and test several times.
  -It could be more than 1 Bank of RAM can be bad so carefully test RAM.
  -Wait for the next Windows installation menu.  It is not instantaneous, but it will come sooner or later.

  Thank you!!!

• the logo of computers manufactures, before windows starts. How is - put it on screen

  the logo of the factory, before windows starts. Hence is it from inside the system? drolnoraa

  Well, if you have a motherboard Intel boot logo & other

  the items can be modified. Try intel.com, search of the Integrator 'Intel' utility, they

  have to versions, it's also free without limitation in time.

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• Initialization of a wireless automatically before windows logon?

  I'm trying to deploy software updates on a network by using active directory.  The update is supposed to install before windows logon.  It works correctly on a computer that is connected through the LAN, but the update does not install when the ethernet cable is disconnected.  I guess that's because it cannot access the network share and that is it connected to the network wireless before opening of session that it would install.

  Question:

  Is it possible to automatically initiate a connection before login?

  Any help would be appreciated :)

  -Brandon

  Hello

  Unlike hardware wire wireless current connection depends on much more than the operating system currently running.

  As far as I KNOW, there is daily work on this issue, because we are talking about and fortunately this will be better in the future with new Chipsets andRradios.

  In any case try to post here also.

  HE the Pro Forums on TechNet.  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Blue screen Windows Setup hanging from the message "Setup starts Windows.

  I have a M2n SLI chipset and my computer came stock with vista 64-bit, after losing all the functions of the operating system because of a problem of .net I have tried to restore without result.  I got down to the wire with whiping the drive and now I am trying install Windows XP Pro Service Pack 1 (old drive, still trying to see if an operating system takes in general).  The BIOS Setup to boot from the disk, I get the blue screen of installation of Windows to pop - up and start installing its drivers.  However once he reaches the message 'Setup starts Windows', the screen freezes it for as long as I'm ready to watch it (left for a long period of time and no difference).

  Other cases that I also noticed when I restart my computer it will not even reach the configuration screen rather right at the point where you could normally see "Press any key to boot from CD" I received a message 'FreeDOS' and it hangs there.

  I'm not experienced with computers at all I'm just regurgitating given to me by my roommate who happens to know more information. I hope this isn't a hardware problem as I firmly doubt replacements will be economically feasible for me.  Any help would be greatly appreciated. Thank you.

  Hi scottycms,

  See the link that provides information on the reasons below the slot problem and the resolution for the same: Windows XP does not meet the "Setup is starting Windows XP" Message: http://support.microsoft.com/kb/310760

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• change a user settings an administrator setup for windows vista windows

  in windows Vista, how to change a user settings an administrator setup for windows vista windows. In the CMD window, I tried running the disturbance of disk of my user ID, he comes back and says it must be run by an administrator. When I log on as an administrator id, it works well. There must be a way to reset my UserID on the admin id. When I try to go into the type of user account modification from standard user to user adminstative. It won't let me., it always defaults to the standard user even when I change ID admin ann.
  Also, when you use the Defragmenter GUI disc on any id and change the time or date, it will show the new race date, but when you click OK and return to annex it always says the next execution date is 'never '.
  Thank you

  Hello

  I suggest you to follow the steps from the links and check out.

  Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  Why use a standard account instead of an administrator account?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-use-a-standard-user-account-instead-of-an-administrator-account

• to change the Polish language to English in windows 7

  I am shankar duct of the Nepal, I recently brought a lenovo laptop g550 of polland having windows 7 Edition home premium, but the language is Polish, which I can't understand so I want to change language to English. give me an idea about it. in the regional icons and time keyboard icon there is no option of installation/unstall why?

  I am shankar duct of the Nepal, I recently brought a lenovo laptop g550 of polland having windows 7 Edition home premium, but the language is Polish, which I can't understand so I want to change language to English. give me an idea about it. in the regional icons and time keyboard icon there is no option of installation/unstall why?

  Hey shankar duct

   
  as you windows 7 Home premium , you cannot change the display language
  you need windows 7 ultimate or windows 7 Enterprise to change the display language ofwindows 7
  http://support.Microsoft.com/kb/972813

  Walter, the time zone traveller

• Windows 7 re-setup on DELL Inspiron 1564 hangs at "Setup starts Windows.

  Hello world

  I have a very serious question because of which my Dell Inspiron Laptop is dead since last one. I bought this laptop in 2010 from the United Kingdom. Everything was ok until last month when first login screen of windows user took the extraordinary time is displayed, and then when I rebooted my laptop Windows refuses to start giving me the following error

  1. Windows could not start. a recent hardware or software change might be a cause.
  2. If windows files have been damaged or misconfigured start-up can help diagnosis and fix the power of problem.if was interpted when starting up to choose window start normally.

  Dell reinstallation DVD of Windows 7, which came with the laptop, I made bootable USB (as my optical drive does not work) to reinstall windows, but after "window load files" screen when I click Reinstall windows bind it stucks there like forever. It just shows the message "Setup starts Windows. I waited for 4-5 hours, but it does not further. Someone please tell me what could be the reason for this.

  I thank in advance

  Please run the F12 diagnostics tests may be a module of RAM or your HARD drive is defective:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  If the diagnostics pass, you have to clean install Windows 10 using your WIndows 7 OEM key see here for more details:

  http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

  If you want to stick to Windows 7 see here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-7/Windows-7-installation/

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Windows 8 Pro includes the MLUI (multi-Language User Interface), as Windows 7 Ultimate?

  I find this feature very useful and I was wondering if it is also available in Windows 8 or Windows 8 Pro.

  Indigo salvation,

  The ability to install the Multilingual User Interface is available for all editions of Windows 8.

  "For Windows 8, we redesigned the experience of display language, focusing on the additional input displays the languages available to all Windows users, which makes them super easy to find and install and allowing users to switch between them."

  Take a look the MSDN Blog for more information:
  With the help of the language you want

  Thank you!