Language problems, burning discs of windows media player

Similar Questions

• Problem: Burning CDs with Windows Media Player

  I'm having a problem with burning to a blank CD using Windows Media Player.  The songs that won't burn have a red "X" next to them and details of the mistake of saying "this file cannot be burned to a CD, because it is not on your computer."  I looked at the location of the file, and it is located on a web address.  I would really appreciate any advice you have to offer on how to solve this problem.  Thank you.

  The files must be downloaded to your hard drive.  Windows Media Player cannot burn files on the internet.  Are these songs to a music streaming service?  If so, they must be purchased before burning.

• Not able to burn blank discs in Windows Media Player 11

  Original title: NEED TO re - INSTALL WMP11 PROGRAMMER

  MY WINDOWS MEDIA PLAYER 11 IN WINDOWS XP VERSION 5.1 SP3 DOES NOT BURN THE SONGS ON A CD AUDIO VIRGIN. WHEN I CLICK "START BURN" AFTER A VIRGIN DISK IS IN THE DRAWER 'E', THE 'MEDIA INSERT BOX' THEN "DRAG TO DISC BOX" POSTER AND THE PROGRAM NEVER "AUTOMATICALLY STARTS TO BURN THE DISK OF VIRGIN.

  THE SOFTWARE HAS BEEN INSTALLED ORIGINALLY AS AN "OEM" IN MY DELL COMPUTER. I LEARNED THAT MY WMP11 IS PROBABLY DAMAGED AND MUST BE REPLACED.

  (1) DO I DELETE THE "WINDOWS MEDIA PLAYER 11" AND THE "WINDOWS MEDIA FORMAT 11 RUNTIME" PROGRAM BEFORE INSTALLING THE NEW WMP11 BY DOWNLOADING FROM THE MICROSOFT SITE?

  (2) I CAN DOWNLOAD THIS PROGRAM FROM MICROSOFT EVEN THOUGH MY ORIGINAL SOFTWARE WAS "OEM" INSTALLED BY DELL?

  (3) I AM 79 YEARS WITH BASIC COMPUTER KNOWLEDGE. CAN YOU GIVE ME A FEW POINTERS AS TO HOW TO DO THIS PROCESS "UNINSTALL AND REINSTALL?

  THANKS A LOT FOR YOUR HELP

  Hello

   
  1. were you able to burn disc using Windows Media Player 11 earlier?
  2 have you tried burning the disc manually?
  3. What is the exact error message you get?
  4. were there any changes (hardware or software) to the computer before the show?
  
  Download the Windows Media Player 11 from the link below and see if the problem persists.
  http://www.Microsoft.com/download/en/details.aspx?ID=8163
   
  Previously, reinstall WMP (Windows media Player), you try to burn manually.

  Change the settings for burning, then check.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

   
  
  Note: Yes, you can install Windows Media Player 11 from Microsoft, even if it has been installed by Dell. No, you do not have to remove the previous Windows Media Player 11, that it will update after you download and install from the link mentioned above.
  
  Hope that helps.

• The difficulty to burn an Audio / or data disc using Windows Media Player on Windows Vista

  OK, so here's my question:

  I cannot burn an Audio / or disk of data using Windows Media Player. For some reason my Media Player is not finalize the discs that I do and he pops to 94% or 98%. I have a TEAC DVD +-RW DVW28SLC ATA Device. CD-ROM/DVD-ROM drives.
  Has anyone experience this problem with Windows Vista?
  Thanks in advance,
  Melissa
  Hi Melissa,
  Thank you for writing to Microsoft Communities. I understand that you are facing problems when burning a DVD in Windows Media Player.
  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
  1. What is the format of the file you are trying to burn?
  2. do you have a third-party CD/DVD burning software installed on the computer?
  3 have there been recent changes to the computer before the show?
  4. are you able to burn through windows Explorer?
  Let's try the following steps:
  Method 1:
  You can take one or more of the following, and then try again:
  a. Verify that the CD burner is properly connected.
  b. clean the disc and verify that it is not damaged.
  c. try a different brand of blank discs.
  d. If another program is currently burning files on the CD, wait until the burning process is completed.
  e. Quit other programs that may be using the CD burner.
  f. restart Windows Media Player.
  g. restart your computer.
  Method 2:
  You can try the steps to solve problems in Windows Media Player
  Please return to the State of the question so that we can help you better.

• Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.

  Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?

  Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi, Dorian,

  Thanks again for your response. Really, I apologize for the inconvenience caused to you.

  You can try these methods to solve the problem.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) press Windows key + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  If the problem persists, use method 2.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

  Thank you

• burn to disc in Windows Media Player

  Windows media player does not accept one of my discs to burn music

  Windows media player does not accept one of my discs to burn music

  ======================================
  Your burner working properly with other software?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Currupted Burn installation in Windows Media Player. Error a critical process of Windows Media Center has failed.

  Original title: Currupted Burn installation in Windows Media Player for Vista Home laptop

  Currupted Burn installation in Windows Media Player for Vista Home laptop.  My registration cripting of Window Media Player and streaming facilities have been corrupt, but have been corrected, but I can't burn CD/DVDs.  The appearance of the message tells me "a critical Windows Media Center process has not, can someone please help me with this problem.

  Thank you for your help, the problem has been resolved.  Much apprecited.

• When I RIP and burn music with windows media player the disc will only playback on computer

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  I must have the wrong settings on my functions to rip/burn because the music, put on the disk is reproduced on my computer, but not my cars, stereo system. When I read the file for each song extension, the extension is "wpl" what are the correct settings for a retry? Windows xp.

  ==================================================
  The .wpl files are probably Windows Media Playlist files... not real music files.

  Here is some info on the .wpl files:

  WPL file extension
  http://www.downloadatoz.com/file-extensions/wpl-file-extension.html

  File extensions on the Audio CD (music) that will play in a CD player must be CDA.

  The following link might be worth a visit:

  Windows Media Player 11
  for Windows XP
  Burn your own custom CDs
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/MP11/burn.aspx

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I get a long piece of music on 2 discs on Windows media player please?

  I want to put a record 1 h 52mins on disk, so when disk 1 is full it automatically asks me to insert the disc 2 as you can to copy records to itunes. Is this possible with windows media player?

  Hello

  ·         What is the format of the file you want to burn?

  ·         What is the size of the file?

  ·         You try to burn on a CD or a DVD?

  If it's a single file, then you cannot divide during the burning process. In this case, media player will say that there is not enough space in the disk and the burning process would not succeed.

  If it's a playlist or a set of several files, then he would ask for the second disk automatically when the first disc is full.

  Take a look on the bottom of the article for more information about burning a CD/DVD with media player:

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• text to burn cds on windows media player

  I would like to know if it is possible to add text (the album title, artist name, song title) in the CDs that I burn on Windows Media Player.

  Hi FreddieHayes,

  Windows Media Player does not burn audio CD, CD text, and it doesn't have the plug-ins Windows Media Player from Microsoft which will be added to this support.  There are many applications that make the third party CD burning. Moreover, if the CD supports playback of WMA or MP3, you can use Windows Media Player to burn your CD with more songs by CD and all track information.

  However, there are third-party applications that will enable this feature. You can check on the internet for plugins like these.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also check the links:

  Add items to the Windows Media Player library

  Add or edit media information in Windows Media Player

  Add or change album art in Windows Media Player

  Hope this information is useful.

• Not possible to burn music with Windows Media Player

  When I drag music from MP3 Rocket files to burn the pane in windows media player, they will not 'stick' nor will they stick to the music library... althoguh I did it before in the two front wings, why not more?

  OT: drag & drop

  Hello

  I suggest you try the steps from the following link to burn CD/DVD with Windows Media Player.

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  Additional information:
  Burn a CD or DVD in Windows Media Player: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  If the problem is only with MP3 rocket software, then I suggest you to contact the support of the rocket.