laptop 15 - ac0 39TU: driver problems

Similar Questions

• When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10)

  Teredo tunneling adapter error: Code 10

  I have a wireless modem in my house.  When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did.  But it will not re - install.  I'm not too irritable.   Can help you.

  In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer.   The doc will be in Quebec but does not print.

  Thank you.

  Hi LindaGreenwood,

  1. what operating system is installed on the computer?
  2. you have made no changes to the computer before the broadcast took place?

  Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Dedicated graphics (A1398) driver problem

  My Macbook Pro (A1398) dedicated card (Geforce GT650M) graphics driver problem.

  Installation of the drivers of web from Nvidia (WebDriver - 346.03.10f02.dmg, WebDriver - 346.03.10f01.dmg, WebDriver - 346.03.10 b 01 .dmg) with CUDA drivers (cudadriver - 7.5.29 - macos.dmg) and toolboxes CUDA (cuda_8.0.29_mac.dmg and cuda_7.5.27_mac.dmg) does NOT.

  When I tried to install Caffè/CUDA (used for Machine learning), my card (Geforce GT650M) dedicated graphics card driver has become corrupt (seen through the Console).

  Dedicated card random is more gets reported under 'report system' (probably due to the problem of driver).

  Attempts to restore have been hit and Miss so far.

  I downloaded the drivers from Nvidia web (WebDriver - 346.03.10f02.dmg, WebDriver - 346.03.10f01.dmg, WebDriver - 346.03.10 b 01 .dmg) but they have only worked / failed randomly when combined with CUDA drivers (cudadriver - 7.5.29 - macos.dmg) and toolboxes CUDA (cuda_8.0.29_mac.dmg and cuda_7.5.27_mac.dmg).

  Only the internal graphics card Intel Graphics 4000 is constantly working.

  I cleaned the system (by removing all traces of the nvidia drivers and drivers of coda) while that to reinstall these drivers in different combinations.

  Yet, the conclusion is that it is all the success and the miss.

  Sometimes it worked I could test samples CUDA.

  Other times, that it worked, but the laptop would freeze randomly.

  Then, he failed once again and returned to map internal Intel completely.

  It was suggested that I should be able to restore it by reinstalling ElCapitan

  I don't have the luxury of reinstall ElCapitan.

  Is there a way to access the Apple drivers without having to reinstall OS x.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  This could be your problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

  Need to reinstall OSX to reinstall the Apple drivers.

• My cd rom seems to have a driver problem

  Hello

  My cd rom seems to have been corrupted and I have a message from code 39. How can I use my recovery disks when the cd rom is not working. I have an old computer that has XP loaded, I can load my inside recovery disks & copy on an external hard drive and then copy it on my laptop which is a HP Pavilion dv - 7 3111ea.

  Thank you

  Hello

  Unfortunately, it is not possible to do what you suggest.

  However, the CD/DVD drive should still work with your recovery disks (unless there is a hardware problem with the drive), because when you start the laptop computer, the drive is controlled by the Bios, no windows - code 39 refers to a driver problem Windows.

  You may be able to correct the error of the Windows driver as follows.

  First, try the automated Microsoft fixit at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If the drive does not, in the Menu start, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Reboot the laptop.

  When windows is completely reloaded, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  

  Kind regards

  DP - K

• 1000 - 1b09AU: driver problem

  Hallo.

  I would ask, there some driver problem happening on my laptop.

  That is the problem.

  The retailer installed OS is Windows 8 Pro inactive. The laptop works well, but there are a few problems of brightness.

  When I decrease the brightness, the brightness is returned to brighter level, even when brightness is 40%.

  The following illustrates.

  100% - the brighter.

  Reduction 90% - approximately 30% darker than before

  80% - reduced 30% darker.

  70% - to the brightest level.

  And continues up to 10%. But it's OK.

  Now, when I reinstall Windows to 8.1, even the brightness decreases. Always in the brighter level, it makes my eyes sore.

  And when I check for Device Manager, the graphics card displays 'Microsoft Basic Poster' instead of 'Radeon HD Graphics 6480 G '.

  I think that I have installed the driver properly. Even I ran the installer of the pilot twice or more.

  When I approached the extractor frome pilot the retailer where I bought it (the seller gave me a copy of the drivers for the laptop on my HARD drive), there was something wrong. My graphics card is not mentioned in the support and functionality of device. I was disappointed. I think that the retailer has made a mistake.

  Now, after I checked the official download link, I opened the linkand what comments? My display driver is not in the list! I was disappointed, once again.

  Can I download the driver from the official site AMD? this one?

  If not, is there a solution of HP?

  I'll wait.

  Oh one more. I hope I don't have to create a new topic for this issue.

  The sleep option is also disappearing. It's never happen before I upgraded to Windows 8.1.

  Thanks for your help.

  Hello:

  Since there is no graphics driver HP W8.1, your only option would be to try that one directly from AMD.

  Unless you get a graphics driver to install, there is no option of sleep.

• Alternative to the reset by Satellite A660 for potential HARD drive problem

  In the last week or two, I got a few blue screens, saying he was driving demand, and that windows must be shut down to avoid damage my computer.

  I have just restart and continue working.
  The last time it happened, I had repeatedly "initialization failed" and it says hdd, SDS, fdd. If I pressed the power button until I didn't see no signs of activity, then started. Things went well. I called Toshiba support and they recommended that I go home and save my files before continuing. It took hours selectively to clean, sort the previous backups, and a small footprint of the backup system.

  When I called Toshiba once again, they recommended a "takeover", which is restoring the factory settings. It puts me in the stone age. I have to go through a never-ending process of the upgrade to Windows 7 Pro 64-bit, install and reconfigure all the applications and environments/configurations, etc. It will essentially take on holiday, if not more. I'll also have to get another computer (maybe a netbook) to stay in touch while I restart my laptop. It's barely more than a year.

  Is there a diagnosis I can do to determine the probability that there is a hard drive problem? Support for Toshiba said that is the surest way, because it provides a diagnostic F10 for the hard disk code, and it also pushes the bad sectors at the end of the disc (logically, I suppose, since you can't physically move a fault).

  > About Hitachi DFT, is it important that my HARD drive is Toshiba mk6465gsx? This is what is displayed "Hard drives" in the Device Manager.

  It s no matter what HARD drive manufacturer, it is the Drive Fitness Test is able to scan all hard drives to find errors.

  > Also, http://www.hitachigst.com/support/downloads/#DFTshows links to create boot disks, but I was wondering if I could create a bootable instead.

  Not sure if this is possible if there is that one option to create a startup disk, and then a flash stick does not work. But of course you can try this out.

  > This laptop does not come with a floppy drive, and I still create coasters trying to burn discs.
  You don't need the floppy drive, the tool must create a disk bootable (CD)

  > I guess that the same question can be asked on Memtest86. Another issue is the relevance of Memtest86 for my system. My c drive has a "Program Files" folder, but also a "Program Files (x 86)" folder for 32-bit applications. Memtest86 is for the x 86 architecture. I don't know if my 64-bit Windows 7 involves a non - x 86 architecture.

  I guess that Memtest86 should also work on Win 7 64 bit systems. But also the MemTest 4.20 is 64-bit capable

• HP laptop - 15-g227wm: Hard Drive question, in need of a solution

  First of all, I don't know if the version of Windows running was of 32-bit or 64-bit.

  The laptop in question is my mother and randomly, he started to become unresponsive in the middle of the night.  She had not dropped it and only uses the laptop to surf the internet and play some Facebook games.

  I went to the start menu and asked the laptop to run diagnostic systems.  In two minutes, he told me that the disk check hard short DST was not, by giving the code 9SNJ3G-7MP84W-XD7WL1 - T 60, 703.

  As it is a hard drive problem, I hope that, at the very least, it will take replace the hard drive, if not buy another laptop.

  The problem is the following; the laptop was purchased at a Wal-Mart.  It was the display model they had, as it was the last one in stock, and Wal-Mart could not locate the box for the laptop at the time of purchase.  We have no user manual and no CD to reinstall Windows (the laptop had 8.1 the purchase, and we took advantage of the free for 10 update when it was available).

  Please let us know our best options.  Thank you for your time.

  Hello:

  While I can't tell you precisely what that code means, yes the the bottom line is the hard drive has suffered an accident and needs to be replaced.

  Initially, the PC came with 64-bit W8.1.  HP does not support this model for 32-bit operating systems.

  Here is the service manual for this model.

  http://h10032.www1.HP.com/CTG/manual/c04886216

  Removing and replacing the drive hard in this model is a daunting task, but if you are up to it, see Chapter 6 for R & R procedures.

  If the laptop is still under warranty, you can get HP to replace the drive under warranty.

  If this isn't the case, you're on your own.

  You can order W8.1 recovery media for the laptop computer from the link below, or clean reinstall 10 64-bit windows on the new drive from the link below it (media creation tool).  You can clean install W10 for free, without a product key, given that the laptop was already legally upgraded to W10.

  http://support.HP.com/us-en/mediaorder/HP-15-G200-notebook-PC-series/7486438/model/7791820/softwareitem/803672-001/STEP1

  http://www.Microsoft.com/en-us/software-download/Windows10

  Support page of your laptop is on the link below...

  http://support.HP.com/us-en/product/HP-15-G200-notebook-PC-series/7486438/model/7791820

• HP ENVY E1P05AV: IDT Audio Driver problems in Windows 7

  For the past few weeks, I dealt with the same audio swings and speaker problems that a lot of people here have complained.  I am aware of the updated driver for those who have Windows 8 computers, but I have a Windows 7.  This computer was purchased in June, after my previous HP laptop (which therefore had no problem) had to be replaced.  Restarting the computer solved for a few minutes, but there always questions until it inevitably makes it so I can't hear anything or play videos.  I uninstalled, deleted and reinstalled the driver IDT several times including downloadling directly on the site of HP. I sat and looked at the settings Audio Beats swing back and looked like Windows Explorer crashes because I tried to change the volume on my keyboard settings.  Most of the time, I can not even restart or shut down my computer more, it just stays on a black screen with the power light until I turn OFF manually or the battery dies.

  I am so frustrated with this and even more so by the fact that a fix has been pushed through for the users of Windows 8, but you leave those of us with Windows 7 stuck with unusable laptop computers.  Please tell me how I can fix this or direct me to someone who can help me to replace my laptop.  Thank you.

  P.S. I'm not angry with you, just at the situation, I'm sorry to sound like a jerk.

  I solved the problem, but thank you very much for your help.

  Audio swings and the total lack of audio was caused by a loose speaker inside the computer wire.  I was able to tie it and everything works fine now.

• Failed to get on the Web. Driver problem?

  I started having trouble with my Compaq Presario, out on the web.  I started working with a direct technology company,
  who is on your remote computer.  had some experience with them, which was really good.
  After a few days now (about 7 hours in total) they think I have some sort of driver problem and he said I need to get
  a Service Pack 3 for Windows XP Pro disc (which I have on my computer) since I can't get out, I talk to them with the laptop of my son,
  Windows 7 Home premium with SP 1.
  I can't find such a drive to buy.  Can I download a file SP3 from Microsoft, to my son's computer, burn it to a disk to use with my computer?

  Martin H,

  We can update the SP 3 for your system,
  Here the link to download:
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
  Kind regards
  Chauvet J.

• Have a computer dell laptop. replaced the hard drive; tried to install my Windows XP and my product key is not accepted. I was wondering why and how do to accomplish this task.

  My dell laptop had the hard drive replaced.  My son, who knows computers, installed the new hard drive.  Then he tried to install my Windows XP Professional software - when it came time to put the product key #, it was not accepted.  It's authentic.  The product key is: * removed *.

  There no mention of this issue in section outages or other information provided in the booklet provided.  Can you help me with this problem?

  The license key and product type must match (XP Home vs XP Pro;)  (and OEM license vs the retail license).  If it's a Dell computer and you get the product key from a sticker on the case, then there is likely a version of Windows XP OEM this product key.  If you install Windows XP from a retail installation disk, then the types of licenses will not match.  You will need to use the license that accompanies the retail installation disc or you will need to contact Dell for an OEM installation disc to go with the license on your sticker case.

  HTH,
  JW

• Device driver problems"the operation requires an interactive window station

  Original title: device driver issues "the operation requires an interactive window station.  replaced the bad hard drive on laptop running Vista with Windows 7 HDD.

  I had two toshiba laptops satellite. On one, the hard drive went bad, the other liquid has been spilled, and the keyboard in ruins. The one with the bad hard disk was Windows Vista.  I replaced it with the hard drive of the other computer that uses Windows 7 Home Premium. Initially, it appeared, it would work without a problem, but I device driver problems.  First of all, it is audio and video.  When I updated the driver audio and restarted, Syntec PS / 2 touchpad no longer works. I tried (using the keyboard only) for updating the touchpad driver, but ultimately it fails with the message "the operation requires an interactive window station.  Then I tried to install a USB Microsoft Intellipoint mouse, it seems that the driver will be installed, but I had to use the keyboard to accept the terms and conditions. Then it errors "Setup was unable to install a required component: Microsoft Application Error Reporting." Restart your computer and try running the installer again. If this error occurs again, see the Readme file in help for more information. (Error code 1601).  How can I get my device drivers all working correctly?

  Best option is to reinstall the operating system.

  Also check this:

  This operation requires an interactive window station.
  http://www.TomsHardware.com/Forum/235014-44-this-operation-requires-interactive-window-station

  If the laptop is under warranty, contact Toshiba.

• ADS Instant HDTV PCI has a driver problem. Its used to play through the speakers of HDTV. Now he doesn't.

  I have a Sony VAIO laptop that I have previously connected to a TV high definition using the HDMI cable with success (sound and video broadcast by the TV).

  I use Windows Vista home edition.

  A few months ago, the noise ceased to play through the TV speakers.    I recently used a program of automatic correction of Microsoft and got the following error message: "ADS Instant HDTV PCI has a driver problem.  Can offer you a solution?  Thank you.

  Hello

  See the link below, he talks about the similar issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/audio-device-ads-instant-HDTV-PCI-cannot-start/00bb256f-cf91-44A3-8a66-733ad0a4cdfa?LC=1033

• Dell Inspiron laptop, Windows Vista Factory restore problems :(

  Hi, I'm a poster first. My computer knowledge is empowered moderate, so please cut me some slack! I hope someone can help me, I would be very happy.

  I have a Dell Inspiron laptop computer and the operating system Windows Vista 32. I recently tried a factory restore. I wish that I would have looked at this site before I tried.

  I finished the factory restore, but I think that I made a mistake. I have saved all the files except my music files, because I didn't think anything was important. I'm stoopied. Now, when I try to use my computer is a few things wrong with it.

  1 there is no way to connect to or even to recognize a wireless network. I have one in my house who previously worked a lot with my computer. When I use windows to diagnose the problem: "this computer has an adapter installed and configured wireless device." If I click on the button that says "install wireless networking equipment and verify that the correct drivers are loaded. Up is a window "Solve driver problems" which is almost useless.

  2. when I try to run a program, for example already installed windows Mah Jong Titans, on the computer I get this message: "exceleration material is either disabled or not supported by your video card driver, which could slow down the performance of the game. Good so my video card is not well configured. Now that I look, the resolution looks really different than before. Kind of a blur. I use my computer to run the music production software so I don't know that this is going to work.

  3. I have the DVD of re-installation of the operating system. I also have the CD of resources that contains all of the drivers (or other.) I can't load the drivers, or even knowing which ones I should install.

  I guess that I just want to know what I do to recover my computer at 100%. I hope that my problem is not too broad or too specific, but I hope some feeling there out a pain and can help out me.

  THANKS IN ADVANCE

  -nick

  OK, the factory restore (takes 10 minutes) is less work because everything is done and you do not have to load drivers or utilities. In any case, it is easy to do and you have all that on the drivers and utilities CD. There might be a few steps on the CD, but you can download Dell. Once you have reinstalled Windows back post and I'll tell you the order in which to load your drivers. To do this: equip your Windows DVD. Everything that comes close to her. Restart the computer. As soon as you see the Logo Dell press F12. You will see the start page. Select your drive (should already be highlighted) and press ENTER. Press a key, install now, accept licenses, instructions are not always the same for each computer, depends on your configuration. Take your time, follow the instructions carefully. You must delete all data from your hard drive (C :) and the NTFS file system format. Also delete (D :), it's where is the factory restore.) You can post back if you arrive at a page (just stop there and wait for my reply) you don't understand.

• Clean install Windows 7 Ultimate x 64 on dv9502tx driver problem...

  Hello

  I have a laptop dv9502tx which main drive had failed and I have no recovery disks available.  Instead I opted to install the new clean copy of windows 7 ultimate x 64 on the new hard drive that pretty well installed successfully without a hitch.

  Now I have 2 problems basically in Device Manager which I can not find the drivers for and I'm not really sure about what devices they are.  If anyone knows what are these "Base system device"?

  

  

  

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Hello

  Download install na:

  Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)

• Dv7-1260us wireless driver problems

  Formatted and installed Windows Vista Ultimate 32 bit.  From all the drivers off http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=3860646 and so far all works great except for the wireless.  When I try and run the installation of the driver provided on this installation page is never ending and windows asks if I would try to reinstall again.

  I saw on another forum that this laptop has perhaps not an inside broadcom wireless adapter at all, maybe it has something to do with driver problems?

  Hello

  You can try to install the Atheros driver which is here.