laptop camera has stopped working!

Similar Questions

• ThinkPad E520 - camera has stopped working

  Hello

  I have been using the utility of Communications (Lenovo - Web Conferencing) when I bought the laptop a few months ago, everything was fine. But now when I press F5 (shortcut key for camera options) there is a pop up with massage "Utility Communication UI hand has stopped working".

  Everything is fine in Device Manager.

  Is this a hardware problem? Is there a way to check?

  Surgeries wrote:
  Hey, Ante.

  try to install the utility of communication as well as pilots of the unit; Then go to http://support.lenovo.com - download both software and reinstall.

  It's the first thing I did, and it did not help.

  After some troubleshooting I finally decided to use Windows Recovery - restore the system to an earlier time, I went up to what worked Communication Utility (camera). I had save steps 3 and 4.

  I think that the problem happened after I uninstalled a few programs of Lenovo ThinkVantage (Toolbox; Power Manager and access connections).

  I hope this helps someone...

• Web cam has stopped working and is no longer in Device Manager

  on my inspiron 1420 dell webcam has stopped working. I have not found in the Device Manager.
  

  Also, which could be connected, when I start a box opens indicating this device A USB is not recognized - but there is no connected device.

  any help?

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Look here:

  Reload the drivers of web cam and the enforcement program web cam dell downloads for your inspiron 1420.

• BlackBerry torch Smartphone camera has stopped working

  Unit has stopped working, but the video camera works very well - had the phone for 5 weeks.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  Try again

• Function of Zoom of Smartphones from blackBerry on camera has stopped working?

  Star has worked for about 10 days and then mysteriously stopped working. Someone had this problem? All patches, knowledge? Thanks for the replies!

  Thank you! This seems to have worked. Boards must be among the best sources of consumer information on the planet!

• Why my iPhone 5 c rear camera has stopped working?

  I got my iPhone 5 c last Christmas and it has been fine for the verbal time. I realized my camera back no longer works. Before everyone tells me to reset, I tried so many things, I talked to apple and all, nothing seems to work. My iPhone has got out of the shell once or two, if this is useful. And my forehead and flashlight work very well. When I turn on the camera app and switch rear camera, it goes fuzzy and hangs on the last image in the image of the front camera. Someone at - it help him? I'd like to avoid having a new device

  Sorry for the random capital letters too, he kept on the move

  It looks like a hardware problem

  Take it to an Apple store or an authorized repair center

• Re: Satellite L450D-11 X built in Web Cam has stopped working

  When I open the Toshiba Photo / Video software I just get a photo of clouds. The webcam led turns on but I have no image.
  I aircrcrack and installed the latest version of the webcam software, but have the same problem. I removed the Chicony usb camera from the Device Manager and rebooted.
  The pc has re - install the driver software, but I still have no picture.
  All of the suggestions.
  Thank you

  Hello

  Maybe you should try it;
  In Control Panel-> devices and printers, you will see the webcam listed as working device.
  We could remove the webcam and could attempt to reinstall the driver again.

  I'm not sure if it would make a difference because you have already tried to delete this device manager but it of certainly worth a try.

• Bridge "get photos from camera" has stopped working and bridge no longer recognize my DNG files

  , I've got bridge set up to get the pics off mem.card whenever I have insert one in my laptop (win. 8.1). A week ago I installed PlayMemories from Sony. Without asking he hijacked the task of the bridge to get photos of my cards. What's worse, I tried to start the function "get photos from camera" manually from the deck. Bridge started working, but nothing happens. I uninstalled PlayMemories and reset the bridge, said to my laptop to run bridge as soon as I insert a card. Still nothing is happening and I still can't get the function "get photos" to run manually from the bridge. In any case, I can still rund the DNG Converter to get my photos, but today Bridge does not recognize my files DNG - a well brought yesterday. CS6 downloaded from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the Setup program, but it doesn't seem to do anything. Maybe I should do a full uninstall off CS6 for her to do something... ?  Anyway, if any of you guys could help me with my problems of bridge/CS6, I would be grateful.  I have 3 sets of photos together and a shoot of comp. of snowboarding I have to finish this week

  CS6 running windows 8.1

  Good point.

  Bridge was not integrated with CS6 to CC? I have a following if, uninstall/reinstall only for laughs.

• Integrated webcam has stopped working on my laptop Satellite

  My laptop integrated webcam has stopped working, I tried to check the properties of the device and uninstall and reinstall the driver, but all I get in the device status is

  This device cannot start. (Code 10)

  The I/O device is configured incorrectly or the configuration of the driver settings are incorrect.

  I can't find anywhere to change something as im don't know what to do.

  Can you please tell us which model of laptop and what operating system are you using?

  By the way: since when did you notice this problem of webcam? It started one day to the next?

• computer keyboard HP laptop has stopped working

  my computer keyboard laptop hp pavilion has stopped working; can be used only on screen keybord - ideas?

  Use the warranty and contact HP. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• HP Elitebook 8470 laptop PC - graphics Intel HD 4000 - GfxUI has stopped working - Win 7 x 64

  Hello!

  Since I installed the Intel video driver and Control Panel 8.15.10.2712 22 June 2012 (sp57420.exe) - later recommended by HP.com pilot for my Elitebook 8470 p / OS, I get the error message "GfxUI has stopped working" when you click on "Options and support" in the Intel graphics card and the Media Control Panel.

  Everything works well except this problem, forbidding me to access this menu.

  Some details of my system:

  -Laptop: HP Elitebook 8470p B6P90EA #B10 (16 GB of RAM)

  -OS: Windows 7 Ultimate x 64 (service pack 1)

  -J' have Microsoft.NET framework 3.5.1 active (default value of Windows 7)

  -J' installed Microsoft.NET framework 4.5.1

  Some attempts at solving problems (with no success), I did:

  -Uninstalled and reinstalled video driver;

  -Microsoft.NET framework 4.5.1 uninstalled and reinstalled the driver video;

  Can someone help me to solve this issue, please?

  Here is the response from the INTEL Support:

  I'm sorry to hear that have had problems with the Intel graphics driver.

  This problem has been reported previously, and Intel has fixed with the new drivers.

  Please see the link below for more information on your problem:

  http://www.Intel.com/support/graphics/sb/CS-009483.htm

  Here is the link for the latest video drivers:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23405 & lang = eng & OSVersion = Windows % 207% 20 (64-bit) * & DownloadType = drivers

  HP will update this version of the problem driver too, based on the INTEL update?

• Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

  The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

  I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

  HP Pavilion dv7-6c95dx laptop

  Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

  

  Disassembly instructions start on page 41 of the maintenance and Service of Guide.

  Please send BRAVO

• Laptop HP Pavilion 15-P002NP: Igfxtray module has stopped working

  Hello Hewlett-Packard, there.

  This is a new laptop, the problem come after HP Support Assistant update using the number of items and the cause is probably HP SoftPaq SP68117 Version 1.10Ap2

  After reboot, always get a boring box with the following error:

  "Igfxtray module has stopped working".

  Details of the event 8.1 Windows Viewer 64-bit:

  Nome da size falha com: igfxTray.exe, versão: 6.15.10.3574, carimbo of data/hora: 0x535821b3
  Modulo falha com Nome: combase.dll, versão: 6.3.9600.17031, carimbo of data/hora: 0 x 53087867
  Excecao code: 0xc0000005
  Desvio Falha: 0x0000000000005fc4
  Processo falha com ID: 0 x 894
  Inicio Hora da falha com application: 0x01d071899f305884
  Caminho da size falha com: C:\Windows\system32\igfxTray.exe
  Caminho modulo falha com: C:\Windows\SYSTEM32\combase.dll
  Relatório ID: de378e5a-dd7c-11e4-8280-142d27d7b406

  Thanks in advance for your support to solve as soon as possible

  Conclusion:

  Reason of error related to the use of HP Support Assistant HP SoftPaq SP68117 Version 1.10Ap2 (video "update").

  Difficulty:

  The step of the explanation of the step:

  1 search for "Device Manager."
  2. click on "Graphics cards" to open the drop-down list.
  3. write down the name of the driver you have so that you know what it is that you want to reinstall.
  4. right click on the faulty driver and select uninstall.
  5. allow the wizard to uninstall the driver.
  6. restart the computer.

  Check that it is uninstalled:

  7. follow the actions 1 and 2 once again and check that the driver is called something like Windows generic driver.

  8. to reinstall the driver from the HP website (because wasn't sure Intel Graphics specification):

  9. find the correct material using http://support.hp.com/us-en
  10. Select "Solution and Update Finder" install "HP Support Solutions Framework.
  11 installed Intel Graphics Driver selected by the HP software

  Solved!

  Thanks a lot for your incredible support

• Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen

  Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?

  Hi Andy,.

  I checked the reported compatibility list, and the game is listed as compatible.  Work in 64-bit or 32-bit Windows 7?  I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently.  If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem.  Let me know if you've done all that and you still have questions, and we can try something else.

  Kevin

• My webcam has stopped working on my HP laptop.

  I installed Microsoft security essential and my webcam has stopped working, I don't know what to do, how can I solve this problem. its a hp laptop.