laptop computer becomes slow after a while of use and when the charger is connected, becomes normal.

Hello

I use HP Compaq Presario CQ62, Windows 7 Ultimate 32 bit OS, 4 GB ram, Intel core i5 processor. It is a portable 4 year old. The battery was changed 8 months ago.

Now, coming to the problem, my laptop will work very well for a few minutes at the start when I turn it on. After some time, the laptop everything becomes so slow it takes forever to work. This occurs when the power is not connected. If I connect power, less than a minute it starts to work faster. But the laptop would become very hot.

This problem started when I updated my iPod. After update iPod, I had this problem even while the charger is plugged. Later, I changed the OS Win7 Home premium genuine to Win 7 Ultimate. (Pirates). I have run the genuine Antivirus, cleaned the registry and everything. The problem persists. Please help me with this topic.

Thanks in advance

-Kere

kaaranjikere,

So I checked the error you are getting, and it is not the battery do not, it is the power which is a failure and that includes everything for the power.

So it is likely that something wrong with your motherboard.

You will need to take the system to someone looking over everything.

I would like to know how everything goes

Nice day.

Tags: Notebooks

Similar Questions

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    http://support.Apple.com/kb/TS1502

    Also check out the apple discussion link:

    http://discussions.Apple.com/message.jspa?MessageID=10339681

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • HP HDX 18 - Win 7 Home Premium (64-bit) CPU is palpable when the charger is removed from the laptop/notebook computer

    I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

    The operating system is Win 7 Home Premium (64-bit).

    Corrections or suggestions would be very appreciated.

    SOLVED

    Go to control panel > hardware and audio > power options > change settings > change advance power settings > managent processor power > political cooling system > set to battery for 'Active' option if it is selected as a liability.

    sas84_HeavyHitR wrote:

    I currently have a problem where my CPU stands at 90% to 100% when the charger is removed from the laptop. He immediately rises despite no process running. When the charger is placed back in the CPU of the laptop is usually highest at 2%-5%.

    The operating system is Win 7 Home Premium (64-bit).

    Corrections or suggestions would be very appreciated.

  • My laptop computer screen flashes a few times (very rarely) and after some time screen goes white

    I use compaq V6000 computer laptop with windows xp. My laptop computer screen flashes a few times (very rarely) and after some time screen goes white, I hear only audio. After the reboot, it works normally for hours. I used to know the reason for this and the solution.

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Read the following article that may help you resolve this problem.

    Resources for troubleshooting problems in Windows XP
    http://support.Microsoft.com/kb/307960
    Glitter wallpaper
    http://support.Microsoft.com/kb/555373

  • My computer is VERY slow after upgrade to El Capitan, and especially after I have downloaded MS Office 2016

    After that I downloaded El Capitan, I was satisfied with the content and the speed for about a week. I did a clean install... After 2 weeks of use, I bought the MS Office 2016 and I think after that, I noticed a significant decrease in performance. I mean, like one where I want to throw my computer out the window about 100 times a day. Takes me 30 minutes to start the computer and perform a simple task like the connection to an account on the internet and missing his shot something. 30 minutes! A task that should take 30 seconds.

    I don't know where is the problem. I have a late 2008 Macbook Alu 2.4 GHz, 8 GB Ram, disk SSD (130 GB of free space) and the rest is the default value. Is there a solution, suggestion? Is it fair that my computer can't take El Capitan even with the plug I have, or are at - it something else?

    Thank you that I advance for any help, I'm desperate with her...

    AB

    look at the following link-

    https://discussions.Apple.com/message/29099604#29099604

  • Pavilion 17-f113dx: Internet becomes slow when the charger is unplugged

    Hi all

    I have a problem with Internet on my computer whenever I unplug the charger internet connection goes down, I need to plug back in so I can use internet properly. The question began only a few days when windows update prompted me to install the new drivers wifi. My laptop is a HP Pavilion f113dx 17.

    Hope someone can help, thank you. Nice day.

    @Albie08

    Welcome to the Community Forum of HP.

    It's unfortunate - both drivers Wireless illustrated the State of your laptop Driver Support page specfically this version should improve (and certainly not degrade) performance.

    Ideas

    ---------------------------------------------------------------------------------

    Assuming that you have chosen to create a Restore Point before you make these changes to your computer, you can easily "pass in time" from before the last set of updates have been installed.

    Using Microsoft System Restore (Windows 8)

    ---------------------------------------------------------------------------------

    Use your Recovery Manager to install the original Wireless driver that was preinstalled on your computer, while he was 'new ':

    This document explains how to reinstall hardware drivers and software that were originally installed on the computer at the factory.

    Using Recovery Manager to restore the software and drivers (Windows 8)

    ---------------------------------------------------------------------------------

    Boost the signal on your network wireless when running on the battery.

    See

    Parameters to improve wireless connectivity

    Section:

    Laptop wireless hesitates or does not work when executing a stack

    ---------------------------------------------------------------------------------

    For later - you must let not updates sneak up on you - or allow automatic updates to update the system without having you the time to decide whether it is convenient or critical the right time for this task.

    Updates - when and how

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' Kudos on this post.

    Click on accept as Solution when my answer provides a fix or a workaround!

  • locking the computer: if not using computer for a while, it locks and requires the initial password to get in

    So do not use computer for a while, it locks and requires the initial password to get back in. When it becomes available, we've been thrown off internet, or another program we are.

    I don't know why Mr. Murphy suggested a system restore. Maybe he interpreted your post differently I did. You have your screen standby/power options defined on too short a time. You can also disable the requirement for a password during the recovery.

    Right-click on an empty area of the desktop and click on personalize. To customize the applet opens. Click the screen saver. Change the timeout to something reasonable like 10 or 20 minutes. You will see where you can clear the check box next to the "password required on curriculum vitae... ».

    Now do the same in the (Control Panel) Power Options applet. This link contains pictures showing you how to disable this option:

    http://www.mydigitallife.info/2008/06/29/disable-Windows-XP-and-Vista-from-asking-for-password-to-unlock-on-wake-up-resume-from-sleepstandby/

    MS - MVP - Elephant Boy computers - don't panic!

  • My computer is locked after 10 minutes instead of sleep when not in service

    Original title: locked computer

    My computer is locked after 10 minutes instead of sleep when not in service

    Hello
     

    Could you please clarify the question?
    1 - is your computer hangs / freeze when you wake the computer from sleep mode or when the computer begins to sleep?
    2 or it is locked and it will prompt you to enter the password?
    3. what type of screen you get when the computer crashes?
    4. have you installed the latest display drivers?
     
     
    Hope to hear back rom you soon!

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing

    I have only 2 computers, a desktop computer and a laptop computer. Yet, every time I switch from one to the other, I get a message that I am already connected to TWO. It's impossible because I only have 2 and it is not connected. Any suggestions on fixing that?

    Hi Kelly,

    Maximum machines, the license can be activated is 2. Somehow, it seems that on your side the same license can be activated on any 3rd machine as well.

    Activating the license on any other machine, please select the option to disconnect all other devices and try again.

    Reference: connect and disconnect activate Cloud Creative applications (deactivated)

    Kind regards

    Sheena

  • HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged

    Hello

    My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.

    Thanks in advance

    Hello @JohannNewma,

    Welcome to the HP support community! I read your post and wanted to tender hand can help you!

    I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.

    You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.

    If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.

    Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.

    Thank you!

  • G42-461TU: Laptop hangs when the charger is not connected in

    Hi all

    I use HP G42 - 461TU Notebook.I have a problem with my laptop. He often gets crash when the load increases. Once when the charger is plugged in, it works fine. But when the charger is disconnected, it gets even once block. I thought it might be due to problem of memory and I added extra 2 GB DDR3 RAM too (totally 4 GB now), but the problem persists. Now I use windows OS 10, but I faced this problem with windows 7 too. Can someone please help me diagnose the problem with my laptop? Thanks in advance!

    Hi @Dinesh_R,

    Welcome to the HP Forums! I read your post and wanted to help.

    I understand that your notebook crashes when the charger is not connected. You can start with this document: computers HP - computer is slow (10 Windows)

    Let me know if that helps the problem.

    If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • My first stop runnig suddenly when I try to drag a clip to the timeline or after scoring its entry points and in the Preview Panel, I try to drag it to the timeline.

    Suddenly my first Pro CC 2015-2 arrested runnig when I tried to drag a clip to the timeline, or when, after scoring its entry points and in the Preview Panel, I tried to slide the timeline. Apparently it works because it keeps at the opening, but one cannot do anything but you close with control Q; the keys on the keyboard are one thing that really works.  I can't do anything with the mouse and it seems that a certain way, the software crashed, but with all the panels open and without any warning. I copied the complete proyect to your laptop with the first Minister Pro 2015-1 and it happened the same thing, so I think the question is on the project and it started to happen after the update by 2015-1 about 10 days ago (this is not the first time that's happened but to this day I don't know how every time it turned fixed) old work projects and I finish the proyect (from scratch from another) on the same computer and with the same OS (windos10) without any problem with the Premier Pro CS6. So far I have not had problem with the version of 2015-1 that I bought last November. Could someone tell me what is happening and what is the solution?

    [edited by mod, too long title]

    Fixed with a new version of the same driver 341.92. I hope that it will be forever. Thanks for your advice and also thanks to the chat support team that came to the same conclusion.

  • How and when the computer turns off automatically?

    Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

    This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

    Hello allan299,

    Thank you for using communities of Apple Support.

    According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

    You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

    Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

    OS X Yosemite: energy saver Preferences

    OS X Yosemite: set sleep and wake up on time for your Mac

    OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

    Best regards.

  • I lose my Internet on my XP computer when the printer is connected to wireless.

    My new hp6510 wireless printer works fine but my internet connection is lost when the printer is connected to wireless. I use the printer with a linksys E3000 router. The network has a XP computer, a computer with win7 64-bit. I don't have a problem with the computer to win 7, but the xp computer will drop the internet connection and sometimes I can make it work by repair of the connection to the router, but sometimes I need to restart the computer. If I stop the wireless connection and use the USB it works OK. I tried to get help from HP and Linksysm but no help. I would like suggestions.

    Hello

    Please, try the next workaroud and let me know any changes:

    1. In the computer, click the HP Photosmart 6510 .
    2. In the printer Preferences, click the estimated ink levels.
    3. Click on the tab Advanced settings .
    4. Under view alerts, select the 2nd option - Show alerts ink when I print to me.
    5. Click on close, restart the PC and follow for any change.

    Please let me know any progress,

    Shlomi

  • When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

    When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Step 1: Search for the issue in the clean boot state.

    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    a. Click Start and then click Run.
    b. type msconfigand click OK.

    The System Configuration Utility dialog box appears.

    c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
    d. When you are prompted, click on restart to restart the computer.

    Step 2: Change or disable startup Windows and exit Windows sound and check.

    a. click Start, click Run, type mmsys.cpland then click OK.
    b. click the sounds tab.
    c. under program events, click Start.
    d. in the sounds box, click (none), or different sound, and then click OK.
    e. click exit Windows.
    f. in the sounds box, click (none), or different sound, and then click OK.

Maybe you are looking for