Laptop computer connection directly to a projector and cannot see the screen of my laptop

Similar Questions

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.

• Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

  I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

  It is a problem of carrier - I would like to talk with my carrier

  Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

• Video is not working and cannot share the screen

  Hello, I have a little problem...

  What happens is that, in my group, I can not share my screen or use my webcam because the video button is gray and "Screen sharing" is not there. He said I can't have more than 10 people in the call, but I have only about 5-7 at the time and they can share screens or turn on their webcam. I'm the only person who can not. I already checked my video settings and my webcam works fine. I also already reinstalled Skype and it is always the case.

  What they do that I'm not?

  Thank you! ~

  It is a known problem with the last update of Skype 7.0.

  http://community.Skype.com/T5/Windows-desktop-client/why-can-t-you-turn-on-video-chat-anymore-in-big...

  You can uninstall the version 7.0 and install the 6.21.0.104 previous version of Skype:

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• HTTP 403 and cannot see the photo in the APEX 4.0

  Hello
  I created a new database of 11.2 on win 7 (64-bit) and migrate an APEX application. It worked very well. But when I try to run this app, I get errors opening a picture (Http 403) and I Pascal see the photo icons. Ther I see only a red "x" on the top side.
  
  ICH think there is lack of rights, but I don't know what.
  
  Please help me
  Concerning
  Siegwin

  Hello

  OK, if you have pictures in your own table, and doc_disp_image_display is the custom procedure.

  While you gave in the v_pdet_picture table?

  Also because it is personal you should post you code of procedure.

  And you have allowed the procedures can be performed in URL?
  This could help. The same for 11g
  http://daust.blogspot.com/2006/04/XE-calling-stored-procedures.html

  Kind regards
  Jari

• Reading full drive and cannot see the files! Mac OSX 10.4.11 to 10.6.8 - 32 GB Cruzer USB Glide

  I just bought the Sandisc Cruzer Glide 32 GB flash drive to move photos from one MAC to another.

  -J' have plugged my MAC running 10.4.11 and slipped the records on that I wanted to move. I have not install or use the software Sandisc because it was compatible with 10.5

  -J' I plgged the disc in my MAC running 10.6.8 and flies files

  -J' then slipped the files on the USB in my dustbin of Macs, it looked as if they were out of it

  -J' then plugged the USB in my old MAC and the player complete bed

  Any help would be greatly appreciated and I thank you in advance for answer. Most of the responsed that I found on the forum are related to Wndows machines

  On Mac if you do not empty the trash before the USB is disconnected, it will not actually free up space. can solve the problem 2 ways.

  1. If the files are still in the trash, connect the USB drive and empty the trash. This should free up space

  2. connect the USB drive and use disk utility to erase the drive. Make sure that you use the type of file MSDOS or exFAT for the filesystem for maximum compatibility.

• chips out of my system of netrome monitor I replaced the monitor, but now all I get is 6 boxes of gray and cannot minimumize the screen any help please

  I work for a small Christian Rehab non-profit and security sysytems netrome monitor fried this weekend I replaced it with another monitor, but now when I punch the blackbox upward all that I get is 6 gray screens and I can't minimize, is there something I can do to get the operational cameras.

  Hello Mark,

  You must contact the support Netcrome for assistance

  http://www.netrome.NET/Netro/Eng/BBS/Board.php?bo_table=z3_2

  Hope this information helps.

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• I am trying to set up my computer, so I can send emails and letters with the Microsoft speech recognition

  Salvation in Ottawa Canada.  I am using the above in my laptop.  I was given Microsoft LifeChat LX-3000 running Micro cover and the disc that comes with it.  Disk would not properly charge during installation.  I went to the Microsoft website and tried to download this product, and I got the same results.  Sometimes I plug my head game, and it works for a long time.

  
  I am trying to set up my computer, so I can send emails, write letters nothing complicated.  I use speech RECOGNITION Microsoft,.
  instructions.  My first questions.  Do you actually have a program, in order to activate speech recognition?
  
  I'd appreciate any help, advice, etc.
  
  I approach the age where, I rely on my computer help at times and I really like the lap top.
  
  Bryan W. Fuller
  * original title - Microsoft Speech recognition - 9 windows - Vista home premium *.

  Hi Bryan,.

   
  You can use your voice to control your computer. You can say commands that the computer responds to, and you can dictate text to your computer. Before you start using Windows speech recognition, you must have a microphone attached to your computer.
   
  I suggest you to see the links and check if it helps.
  
   
  Set up speech recognition
   
  Common commands in speech recognition
   
  Setting speech options
   
  Train your computer to recognize your speech
   
  Use speech recognition to operate windows and programs
   
  Dictate text using speech recognition

• every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > Connect wifi > my iphone doesnot ask me activation lock even if my unit is also found on

  every time I erase content and settings on my iphone 6 after reset at the start of my phone and after crossing the screen as Hello > select language > wifi connection > my iphone doesnot ask me lock activation that says that your iphone is connected with the old apple ID, please enter the id and password

  I always reset on find my optional equipment please tell me how to activate locking activation so that whenever I have factory reset my phone with finding my camera so my phone always ask an old apple and password

  I do not understand your question, but let me go with what I believe. Looks like you entered in iCloud and erased all the content and settings on the iPhone, and once you go by assigning back up again, you do not see something that you expect to see, for example, a request for an Apple ID. When you go through the installation process to select the language, etc., it must, at some point, ask you to identify yourself with your Apple ID. are you not see this?

  It would be better if you try to describe exactly what you do again. Also, without the help of any sign of punctuation, it is difficult to track everything you ask. Try providing the steps of what you do, and then what you see when you get to the point that you believe that something is going wrong. You mention both an old and new Apple ID, which is rather confusing.

• I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.

  I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.  When I click on the icon and open to the top it says cannot load xp.com and a flag of resolution comes up saying it can't run a resolution less than 1930 x 2300. I have no idea what this means and how I can solve this problem.  I thought that maybe the application was bad, so I deleted and then added it back on and it does the same thing.  I even did a restore of the system to try hard but nothing I did the work.  So, how can I solve this problem.  I'm not a computer genius, so he must be explained in simple easy to understand instructions.

  Hello

  I suggest that you view in Mozilla Firefox community because there seems to be a Firefox problem.

  https://support.Mozilla.org/en-us/

  Some examples of the problem:

  «I can't open Firefox, it says could not load xpcom.» Who is wrong? »

  https://support.Mozilla.org/en-us/questions/965228

  "I get an error"Unable to load XPCOM". I know that I can reinstall Firefox, but how do I save my favorites?

  https://support.Mozilla.org/en-us/questions/1029239

  'Error message cannot open the XPCOM and impossible to open ALL pages '.

  https://support.Mozilla.org/en-us/questions/1006494

  Here is a YouTube video on fixing this error:

  https://www.YouTube.com/watch?v=x_C2eaNj234

  See you soon.

• I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS

  I AM UPDATING MY COMPUTER AS OFTEN AS I CAN AND IT CROSSES THE PROSSES TOGETHER AND AT THE END IT SAYS UPDATE FAILD WHY? WHAT SHOULD I DO TO FIX THIS

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  How to fix Windows Update, Microsoft Update and Windows Server Update Services installation issues:
  http://support.Microsoft.com/kb/906602

  1. see the "need help?" Tell us what problem you are having"section of http://support.microsoft.com/ph/6527

  2. you cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  3. check your WindowsUpdate.log (% windir%\WindowsUpdate.log) to find errors associated with the download/install.

  How to read the WindowsUpdate.log file
  http://support.Microsoft.com/kb/902093

  3 b. errors compared to those listed here: http://www.bleepingcomputer.com/blogs/mowgreen/index.php?showentry=1122 or go tohttp://windowsupdate.microsoft.com > click on help and Support link in the left pane > solve problems on your own.

  ================

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  ================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012