Laptop computer G500 reinstall

Similar Questions

• activation of the xp SP3 after reinstalling on the same laptop computer. pls help

  Original activation key (removed product key) helps to activate the xp SP3 after reinstalling after formatting C:\ due to the virus on the same laptop computer. pls help

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Please DELTE YOUR KEY - before it gets stolen and subsequently blocked.

• Need to reinstall Vista OEM laptop computer, but does not have install media

  I already have the serial number of my windows that was on my laptop and now I need to install it on the same laptop. but I don't have the windows CD. So, I have to download it. but I can't find any valid and functional link to be on microsoft or any other Web site. is there anywhere to download?

  * original title - where can I download a windows vista Enterprise edition? *

  Hello

  There is no available free and legal Vista download

  Here are the different ways to reinstall vista:

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Save all data, because it will be lost, do the above

• How to uninstall & reinstall a printer driver (R146832) on Windows 7 (new) laptop computer?

  How to uninstall & reinstall a printer driver (R146832) on Windows 7 (new) laptop computer?

  Thank you, I have the same problem with a machine running xp and win 7.  I read where Vista users have also the same cursor jumping problem.  Where should I be to find help or answers.  is this a problem of office?

  You don't have the same problem/question.

  How a jumping cursor is linked to a printer driver problem?

  Transfer your question in your own Thread in the correct Forums:

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  .

  Mick Murphy - Microsoft partner

• If my previous laptop crashed, how can I reinstall Lightroom on my new laptop computer?

  I can't find out how to reinstall Lightroom on my new laptop computer.

  Help, please!

  Install the application of cc on your computer desktop, https://creative.adobe.com/products/creative-cloud and use it to install your lr cc.

• Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10.

  Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10. the same code that is delivered on paper when I bought adobe

  Creative cloud does not use a serial number and creative cloud subscribers for not having any serial number associated with their programs.  Creative cloud subscribers use their adobe ID to activate their programs.

  Download and install the desktop creative cloud application (after signing with your adobe - the same as that used to pay for your creative cloud subscription ID), https://creative.adobe.com/products/creative-cloud

  Open the office application (a shortcut will be on your desktop) > click applications, and then select the programs you want to install.

  the desktop application gives you access to the cs6, cc, cc 2014 and cc 2015 apps.  and probably more in the future.

  If you already have the cc desktop application and you need to update your adobe id, log out and then back to your client application using the adobe id to pay for your subscription in cc: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• HP laptop computer 635: need driver for wireless router

  Hello. I had to replace the hard drive of my laptop computer and a new operating system, Windows 7 Pro, after which it cannot connect to the wireless router. It's a router Westell A90-750018-07. I have a Tablet Android working on this particular router and want to download the driver on it and put it on the flash drive to reinstall on my laptop. Is that going to work? Where can I download it? FairPoint is now 14.99 an extra month of me now for a Support technique Premium. They are waiting for me to borrow a laptop to try to help him to do so. They seek to use the android on the phone, but it seemed to complicated with android as a third party. Will this work? Please if someone could help would be great. Thank you.

  You need the driver for the card installed in your 635 wireless. Problem is that you will know which card you have Ralink, Realtek or Atheros. The drivers are all posted on your support page:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5086540&swLangOid=8&swEnvOid=4059

  If you don't know what wireless card, you need to get the id of the hardware in the Device Manager. Right-click the network adapter, choose Proprietes.dans the window that opens click on the Details tab use the selector drop-down menu to choose the hardware id. After the first string of numbers - or at least the first half of the chain.

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

  I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

  * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

  Hi jsserrano68,

  Read the following article about the product keys for Windows:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

  In addition, if you need to contact Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  Thank you

  Deb

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The program cannot start because LibMySQL.dll is missing on your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk.

  Original title: Mysql Libmysql Dll error correction

  The program cannot start because LibMySQL. dll is missing from your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk. LibMySQL. dll is C:\Windows\System32, but I can't run the .exe file, I want to run, I can to do, how to fix this problem automatically, I have Windows7 64-bit machine, computer laptop lenovo T530

  Thank you!

  I solved this problem, I put this file LibMySQL. dll to the folder where the .exe file is, I want to run. Exe file, I want to run, cannot call LibMySQL. DLL in C:\Windows\System32,that is the question, I found on a forum suggestion what I have to do

• Impossible to uninstall my windows laptop computer synchronization application

  Impossible to uninstall my windows laptop computer synchronization application, how can I do to reinstall it? I want to sync my phone and I get the message of atl100.ll

  Original title: impossible to uninstall

  Hello

  What is the exact wording of the message?  Please post back message in its entirety.

  The problems that the programs cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Install Windows 7 on a laptop computer Windows XP

  My wife has an old laptop running Windows XP. I have a whole new version of Windows 7, never used on any PC and want to install on his laptop computer. I saved all the necessary files and folders for it. I can just do an install of Windows 7 on her lappy and if are all the drivers and utilities on the version of Windows 7 that I have? I have a 32 bit and 64, disc but no drivers and disc utilities. I will be able to complete the installation? The answers would be useful, thanks in advance.

  Mike

  Moved from the installation of XP, set at level and activate Forum.

  Hello

  Until you try to install Windows 7, follow these steps:

  Go to your laptop manufacturer's website and check if Windows 7 drivers are available for your make and model laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• Disabling the out-of-order laptop computer

  Hello

  I had installed PS/LR on a secondary laptop.

  This laptop cannot start more due to a damaged processor. I had to replace it.

  I want to reinstall Photoshop on the new laptop, but I want to assure you that the previous license activation will not conflict on the new laptop.

  All the procedures I found suggest that you disable the license of the program running on the old laptop, which is impossible.

  How can I make sure that the old installation will not prevent me to use PS on the new laptop computer?

  Thank you in advance.

  Let's dive deeper into this question. Follow this link https://helpx.adobe.com/contact.html to support comprehensive our answer desk.

  You must place the request to restore the number of activations by one.

  Thank you

  Stéphane

• Cannot import .mxf in PPCC2014, but can in CS6 on the same laptop computer... huh?

  Just bought a new Asus laptop.

  4710HQ-i7 CPU @ 2.50 GHz

  16 GB of ram

  64-bit Operation

  NVIDIA Geforce GTX860m

  I installed PPCC2014. I can't import files from a Canon XF300 .mxf. I CAN import them into CS6 on the same laptop computer.

  I've been editing, .mxf files on my desktop to the PP years and for the last year on CC2014

  I tried to take the files, .mxf on the folder (which contains the .cif, .xml and .sif file) and import only and it does not work.

  The message I get is "not supported or damaged file."

  I tried to import by dragging and using import in the first.

  Someone knows what could happen?

  Thanks for your help.

  Jessic

  Hello

  I came across this before. Seems that Premiere Pro is not properly enabled. I suggest the following:

  Sign out of the creative cloud app and exit (Quit option will be available after a few seconds).

  Now move the following folders on the desktop:

  (1) SLCache

  Windows: OS Lecteur\Program Files (x 86) \Common Files\Adobe

  Mac: Adobe/Library/Application Support/Adobe

  
  

  (2) SLStore

  Windows: OS drive\ProgramData\Adobe

  Mac: Adobe/Library/Application Support/Adobe

  
  

  (3) OOBE

  Windows: OS Drive\\AppData\Local\Adobe Users\ directory

  Mac: /users / / Library/Application Support/Adobe

  
  

  Launch of Premiere Pro and sign in with your Adobe ID

  NOTE: Make sure that your Anti Virus/Firewall is blocking all the Adobe activation servers. Alternatively, you can also check your file "hosts" for any changes.

  If it does not help, I suggest you to runs the CC for Adobe apps cleaning tool to uninstall and reinstall: use of the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

  Thank you

  Regalo

• How to download and activate a CC on the new laptop computer?

  I signed up with success on my Adobe on the new laptop computer account.

  I left the application Adobe etc on old laptop Manager.

  However when I try to download app creative cloud on the new machine, nothing happens.

  Please can you advise?

  Thanks for that.  In the meantime, Sunita in the chat room convinced me by the successful download of the installer.

  everything was fine, until I tried DW CC it have synchronized with the cloud.

  The local file was not displayed correctly so I thought that I uninstall and reinstall DW CC.  Now the CC Manager shows that PCOC is installed, even if I can't now

  open it?  How can I do please?