Laptop computer screen problems!
I walked on my laptop and the screen cracked, but it worked well. But NOW the screen keeps shaking so that I don't see anything on the screen. It starts and stops, and it does not occur when I use the word. Is there something I can do?
There is no you can do in addition to the replacement of the screen; continued use may cause other components to fail. Contact the support of the manufacturer of the laptop computer about the replacement of the screen. As an alternative, you may be able to locate a known local computer repair shop to do the work; I do not recommend using one of the chains of big box stores.
Good luck
Tags: Windows
Similar Questions
-
Pavilion dv4 laptop computer screen problem
my computer hp laptop Pavilion dv 4 is not matched screen is not lighting upward, what could be the problem
Thank you for the information. I fixed my problem. It was exactly as you described the t! Once I removed the plastic between the screen and the keyboard part. He was there on the left side rubbing against the hinge, this is definitely a design flaw. After a small adjustment it works perfectly again. Thanks for your knowledge!
-
I use compaq V6000 computer laptop with windows xp. My laptop computer screen flashes a few times (very rarely) and after some time screen goes white, I hear only audio. After the reboot, it works normally for hours. I used to know the reason for this and the solution.
Hello
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?Read the following article that may help you resolve this problem.
Resources for troubleshooting problems in Windows XP
http://support.Microsoft.com/kb/307960
Glitter wallpaper
http://support.Microsoft.com/kb/555373 -
Use of AL1511b laptop computer screen 5820 T-6401 in Italy. Simple adapter or converter needed? AC adapter / CC seems to be internal. Can I just attach an adapter at the end of the wall to the monitor cord to fit Italian DC connector configuration or do I need a converter between the end of the US AC 3 earth-pin male connector and the Italian DC Jack? Some external adapters have a switch to change from AC to DC and some are just automatic. What is the story here? Any help would be appreciated.
The power adapter in your laptop will automatically convert between 110 V to 240 V automatically. You must just the adapter to connect it to the outlet in Italy. Your monitor should also automatically convert the voltage as well, you need just the adapter to connect it to a power outlet Italian.
-
Laptop computer screen flickering Lenovo G530
I have a laptop Lenovo G530, who has a problem with the flickering of screen that worsen. The computer screen start through a crazy screen flicker then stop and try again. I already checked the cable connection to lcd screen, motherboard and reinstall connection of the LCD to motherboard located under the keyboard, as someone suggested in another ad that I found online that solved the problem for them. I'm starting to think that there might be a bad converter or screen because I hooked laptop for external monitor and it works well with flicker happening when the flickering occurs on laptop.
I enclose a link to a video that I shot the question happens to the laptop screen.
Someone at - it any other suggestions?
Bad inverter or screen?
If you have a valid warranty, contact lenovo support line. (free alternative)
-
Black laptop computer screen discoloration
Hello! I'm here because I had a problem with my laptop recently. I have a HP Pavilion G6 (don't know what year but I bought it in 2012) and for about 2 weeks, my computer screen has just been randomly fades to black.
It is not closed, it stays on and I can still here sound, but the screen remains black. I tried to use an external monitor, but it did the same thing. Also, I get no error message like this happens.
I ran malwarebytes and AVG, removing all he detected, but the same thing is happening. I don't know what is happening.
I did not open my computer or anything like that. Just in case, he began to arrive.
I hope that someone can provide an answer, it would be greatly appreciated.
I suggest you try to do the following:
Press Windows key + R-> type regedit-> press ENTER. Click Yes, if UAC prompts.
See the link to back up the registry first, before continuing:
http://support.Microsoft.com/kb/322756
Now, in the left pane, navigate to the following folder:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Once you select the control, you will find a set of entries in the right pane.
Double-click "WaitToKillServiceTimeOut" to change the value. Change it in 2000.
Click Ok, close the registry editor and restart the PC to check.
If the problem persists, try this:
Click Start-> type cmd-> press Ctrl + Shift + Enter (to start cmd in administrative mode). Type the following command and press enter (make sure all your files are saved and all applications are closed):
shutdown-s-t 00-f
This stops the PC. Check the time it takes to turn it off. If the problem does not occur, change the value in the previous method in 1000 and check. If the problem persists, change 500 then check.
If the problem occurs, it may be due to drivers. Try to update the drivers, specific display drivers. If no update is available, try to reinstall the drivers: uninstall the drivers, reboot the PC, install the drivers, reboot the PC and then check.
-
Computer screen problem after you download the update from Microsoft Windows
My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.
Later, I noticed the screen problem. Can someone help me please on this issue?
Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?
-
Replacement screen for laptop computer screen HP 2000-240 ca
My laptop (HP 2000-240 ca) LED display screen was damaged, must be replaced by a new one. I checked at Amazon.ca, they sell a product like title, (new HD LED WXGA glossy 15.6 "replacement Laptop LCD screen for HP 2000-219DX 2000-239DX, 2000-355DX, 2000-365DX), which is priced at $ 59.97 with FREE shipping.
They also sell a product called (new HD LED WXGA glossy 15.6 "replacement Laptop LCD screen for HP 2000-240 CA, 2000 - 320CA, 2000 - 340CA, 2000 - 375CA), it would cost CA$ 94,12 more shipping (almost the double the previous).
I wonder, what is the difference between these two products?
Can I use the previous (priced at $59.97 with FREE shipping) for my laptop?
Thank you.
Hi Kanata
From what I understand is that all HP 2000 series have the same characteristics of Billboard and HP part number.
We are looking for a spare part with the part number of HP partsurfer Web site or online stores, so that we get the exact compatible part - ideal if we get a provided exactly HP - including stock with them online sellers.
No one can say if the part is actually authentic without you contacting the seller directly and confirms with the record and the part number.
This is the manual, go through the Page 22:
http://h10032.www1.HP.com/CTG/manual/c03138231.PDFData sheet: http://support.hp.com/us-en/document/c02863076
You need HP part number: 645096-001
HP part surfer (no longer supplies, check to confirm):
http://PartSurfer.HP.com/search.aspx?SearchText=645096-001Online stores where I might find the part:
http://www.Amazon.ca/GP/AW/d/B00FN9D9RO
http://www.Amazon.com/GP/AW/d/B005MM4II6?pc_redir=1410517268&robot_redir=1
http://m.Newegg.com/product/index?ItemNumber=9SIA49H1VJ5990
Concerning
Visruth
-
Y510P laptop computer startup problems
Starting the machine up to the computer hangs at the LENOVO white text on black screen forever. The computer only beginning will be properly once the computer is reset as soon as this step, then began again to power off. I have tried everything I can think of, I'v since the bios reset to factory default and need more qualified assistance. It's how portable computer was purchased and has never worked properly. Help, please! Laptop Lenovo Y510P. 64-bit windows 8 dual video card in the additional location. Software installed at the factory that accompanies it in store for most.
I couldn't find an email address of Lenovo support if you know please share.
Thanks for any help
-Alex
Hi Macido,
Welcome to Lenovo Community!
According to the request, we understand that you are facing problem with laptop does not start your laptop Y510p.
Please perform power drain by removing all external devices and shut down the system, now remove the battery and the adapter. Now, press on and press and hold power for 30 seconds and connect the battery and the adapter and try turning on the system and try to boot the system.
I hope this helps. Post back if the problem persists!
Best regards
Ashwin. S
-
Laptop computer screen / Windows startup/login user account
When I start my computer laptop/windows XP I am invited to connect to my windows user account - ok so far. However, the splash screen that shows that my user profile is now showing a second line below indicating the quantity of unread emails I have. This message indicates different e-mail also. How to delete this view?
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
The easiest way is to use the free TweakUI Power Toy utility. Download it here:
http://www.Microsoft.com/windowsxp/downloads/PowerToys/xppowertoys.mspx MS - MVP - Elephant Boy computers - don't panic!
-
Hardware ASus K52F laptop computer driver problem
I was given a laptop (K52F) at Christmas. Now my applications like hotmail, Word and Explorer stop responding on a regular basis. My son said that I should update my hardware drivers and I can find a link for this on the MS Down Load page. I looked and that you do not have this option. Any of you can help me find this link?
Hello
Since this is a new portable contact ASUStek Support, check their online documentation and drivers, and
ask in the forums about known issues. Support can have fixes for known issues and that you would
want the problems documented in case they persist or are there complications of the road downwards. Glance
to ASUStek for BIOS updates, drivers from the chipset level low and other device drivers loaded.ASUStek support
http://support.ASUS.com/ASUStek Forums
http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-usASUStek drivers
http://support.ASUS.com/download/download.aspx?SLanguage=en-us--------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
How DO you restore the laptop computer screen under windows vista image
Now, the picture on my acer laptop screen is totally black. Before that, I had my external monitor plug into laptop via mirror image and both monitors worked to find. My OS is Windows Vista Home premium. Help!
Just a thought... it can be interesting to try to start safe mode
and do a system restore to an hour before the start of this issue.* Proceed at your own risk *.
See the following links:
Windows Vista - start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeWindows Vista - tools of diagnosis to use in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/diagnostic-tools-to-use-in-safe-modeWindows Vista - system restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsGood luck...
-
Laptop computer connection problems Toshiba for HP Officejet Pro 8610
Hi, I just unpacked my new HP Officejet Pro 8610 and after close to two hours still unable to connect it with my laptop. I have a Toshiba Satellite S55 A5257 8.1 Windows running. The printer shows that it is connected to the correct network (with no other network name of the network). I tried setting up with the normal settings, then with firewall disabled, then with the firewall and antivirus, stop and went through all the suggestions on the software to solve problems of installation failure that has been suggested to install. Have also tried to turn the router off and on again and also turn off the laptop and turn it on again. Also the printer is off and turned it back.
I'd be more than happy to try other suggestions that anyone could have.
Update: a little while later, I have at least been able to print using a usb cable, but is not always wireless.
Hi Jimbo867,
Welcome to the HP Forums!
I see that your HP Officejet pro 8610 does not connect to your Windows 8.1 with a Wi - Fi connection. I'm happy to help you with this problem of connection!
Please see the following guides:
- "Can't find the printer" message appears on the computer during a Network Installation.
- The printer keeps Wi-Fi connection.
I hope this solves your problem and I thank you for posting!
-
Cannot modify brightness laptop computer screen on windows 8
I use dell inspiron 17 R special edition. It came with windows 8.
I used it for 3 months. Today, I started my phone and I wanted to change the brightness of my screen, but nothing happens.Brightness buttons are also doesn't even work in the settings menu.Its the same with or without electrical connection adapter.Please help quickly.Hello I am facing also same problem with my laptop sony vaio, but to update my ".NET framework" and the problem was gone.
here step download .NET framework in WINDOWS 8
1 Control Panel
Action Center 2
3. check the windows setting update in the Security Panel that it is on or off (FIND windows update)
4 if it is off and then put it in
5. press on windows update in the lower left corner of the screen
6 view the updates available for windows
7 install .NET framework update
If you find it difficult, you can download .net site, but I'm not sure whether it will work or not.
Thank you..
-
G6 1201tx laptop computer screen cable
Hi, I need to know its price in India. I don't know problem, it's in his cable. It's pink screen projection. I am connected with external monitor and it works normally. The name of my laptop is HP Pavilion G6-1201tx... I don't really know if the video cable is defective or became loose somehow. in any case, again, I'll call hp House engineers. But before that I need to know what could be the estimate. Thank you
It's the Global forum English to peer and not sales or service.
We cannot provide you with price estimates.
Maybe you are looking for
-
Can no longer connect to the Mac App Store
Since I upgraded to El Capitan on my iMac for mid-2011. All I get is "cannot connect to the App Store". Check the App Store Control Panel in system preferences, but does not mention of the connection parameters. Worked well before El Capitan
-
I'm working on a Web site that uses QuickTime. It says I need a plugin. I click on the link. Firefox puts a window showing that Apple QuickTime is required. I click on install. He goes to a window that indicates the plugin is not available and I can
-
Satellite P10: Question about the limits of upgrade of RAM and HARD drive
What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better wo
-
Port forwarding on Time Capsule for Geniego
Anyone know how to configure the port forwarding on time capsule? I need to set a port 8082 & 8083 for my Directv Geniego.
-
Hello world. I just follow the example below http://zone.NI.com/reference/en-XX/help/371361F-01/lvhowto/concatenating_two_strings/ but allways vc gives me an error like this: -Configuration: MyDLLTest - Win32 Debug-The compilation...MyDLLTest.cppWhic