laptop computer starts in safe mode, can't backup recovery, system used retore help

Similar Questions

• Lost start menu / no. icons on bottom / cannot start in safe mode / can not use windows fix option

  After a restart of my computer I have more a start menu bar or icons on my background.  Things seem to work ok most of the time, but my pc hangs on the blue screen more than before.

  I tried to reset my computer to a previous point of reset but my help and support option does not work and when I use the option in the advanced start-up splash screen it appears that it nothing happens because I find myself with the same State of no start bar or the desktop icons.

  I also tried to start my computer in safe mode, but it hangs and never completes the operation.

  My computer came with an installation disk ever because he has been on a hidden HD (Dell 9200) partition but I can't access it because during startup, it hangs at the same place as my safe mode option blocks so I can't use the windows fix option.

  Can anyone think of anything I can do to fix this?  I got it to work by removing the file Explorer in my window of Task Manager running it again, but this seems to be a symptom of a larger problem because I get the blue screen.

  It is up to you and if you want to wait. You still need a hard disk physically viable well. Maybe you want to just wait and then break the RAID 0, treat readers as being separate and test with the diagnostic utility before installing Win7. You do a clean install anyway.

  I'm really happy with Win7. Just make sure you have the drivers for it. MS - MVP - Elephant Boy computers - don't panic!

• What would cause some windows file be corrupt or missing computer start in safe mode

  Windows started closing slowly services now boots only upward in safemode and Panel half missing including the mobility centre using wireless settings

  Hello

  try a restore of the system in safe mode for before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

• After my computer starts, before that I can log in, the system restarts again. This continues to repeat in a row.

  I have Microsoft XP Professional. My computer is Dell. The new thing is happening now, as when I start the system, it starts normally. Then I go my usual login and password to enter. But before that I can do this, the system restarts again. This goes into endless reboot cycles. I don't know what is happening.

  This is usually caused by a bad deletion of malware on your computer.  Somehow, you have to boot from a CD that allows you to change the file system or the registry files.

  The following link shows how this can be fixed by starting with a BartPE disk (go to paragraph "registry value incorrect that prevents you to log on to your user account in Windows XP?")
  I find this freeware Hirens Boot CD is easier to create and can be used to follow the same steps.

  <>http://WindowsXP.MVPs.org/peboot.htm >

  Here is another article that could be useful (Skip down to the section "here is the solution for log - problem logging in Windows XP.")

  < >http://www.winxptutor.com/wsaremove.htm >

  HTH,
  JW

• computer starts in safe mode and stops during the update of the photo shop.

  don't know what to do. Lightroom update fine, but photoshop 2015 keeps making the closed computer

  Hi Perston, what version of operating system do you use? You use creative cloud app to update Adobe Photoshop CC 2015?

  Please try to remove creative cloud app, then reinstall it and launch the update.

  1. remove the cloud creative app.

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  2. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  Try the direct link: http://prodesigntools.com/adobe-cc-2014-direct-download-links.html

  I hope this helps.

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• Computer Vista starts in safe mode, it is impossible to remove malware

  'Vista' of computer starts in safe mode. AVG on and execution of 52 Trojan detections and system leave not Malbytes {sic} program remove them. I tried all of the obvious solutions. Also I can not save and restore any files there I MISS my XP!

  oxooccc0e

  Hello

  See the following message to use to restore access to Windows AFTER you'RE sure that the machine is
  Malware free.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Computer still starts in safe mode

  Original title: pls help!

  I have a macbookair running windows7, after that a s clicked improper shutdown 'start in safe mode' by mistake. Now, it runs very slow (about 10 seconds for mouse to move from one side of the screen to the other). When I restart properly, or stop and start again, it is constantly upward in safe mode... any ideas how to solve this problem?

  Hello

  Welcome to the Microsoft community!

  The computer starts in safe mode, and work slowly.

  Computer would boot in safe mode if the safe mode startup option is enabled in the system configuration utility.

  Uncheck the boot option:

  Method 1:

  To disable:

  a. Click Start, type msconfig.exe and press enter

  b. now click on the Startup tab and uncheck the option of safe mode.

  To work with the computer is slow:

  Method 2: Run the troubleshooter of performance

   

  See the site:

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Computer hangs, reboot, can only start in safe mode

  Original title:-i can only start in safe mode

  Ive tried to use several restore points but when I try to reboot the computer freezes and I have to start in safe mode

  Safe mode is a mode where Windows works only the bare minimum programs and processes necessary to the performance of your system.  When you start in Normal mode, many more processes and applications running.  At least one of these programs or process causes your computer to crash.  If your task is to identify this program/process and, at least temporarily, to prevent it from running at startup.  Microsoft has a tool that you can use to selectively disable or or the process that normally run at startup called "msconfig".  It can be a long and exhausting iterative process of turning things off and restart to see if it you fixed program, but that's what you do:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"

  <>http://support.Microsoft.com/kb/310560/en-us >

  First, disable all items "start-up".  If it does not, set it to 'Services '.  If this does not work, then reactivate some of them and try again until you zero - in on the culprit.

  HTH,

  JW

• Laptop won't start in safe mode. No sound in SafeMode.

  in my laptop suddenly virus enter so my pc is unable to start as usual so just now I he started as a safe mode and I'm not able to get all the sounds with any video that any body can help me for this problem

  Moved from feedback

  Original title: sound off to play

  Hello

  Audio does not work in Mode without failure.

  And you fail to tell us what is your operating system.

  Follow this information.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• deleted files, I shouldn't have-can start in safe mode

  I had malware on my computer so I downloaded "autoruns" to see what processes have been automatically start, I booted up my laptop in safe mode run autoruns and removed the files that have not been verified or has not just look right. I restarted my computer and now it stops with a blue screen saying if I didn't know before the reboot, if he keeps going on check that your software is properly installed etc I'm sure I deleted something I shouldn't have. Anyone know if there is what I can do to fix this? I can always start in safe mode.

  "everything didn't look right.
  Search.  It is a wonderful thing.  :-)

  You can undo what you did?  Did you write down/folder that you did?  You just use the Safe Mode system restore.  :-)

• Acer laptop Vista keeps coming back to "start in safe mode" screen

  laptop girls, can go to set up the screen or it returns to the screen of "start in Safe Mode?  Help, please.  Have Windows disk, but it does not appear to read.

  Hello

  1. What is the number of the model of the laptop?

  2. what happens when you try to start the computer in safe mode?

  3 have there been recent changes made on the computer before the show?

  I suggest you to refer to the article and check if it helps.

  What to do if Windows does not start correctly

  Note: Installation custom (own) Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After installation, you will need to reinstall your programs and restore your files from backup copies.

  Let us know the results. We will be happy to help you further.

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• XP SP3 update causes computer to only start in safe mode

  My daughter had XP IE8 running on his computer, site update Windows XP SP3 download.  I downloaded and installed, however it won't start in safe mode. When I remove SP3, the computer loads normally.  I then uninstalled IE8 (went back to IE6), made sure I had the pre-requistes, followed the steps as outline on the microsoft site, downloaded SP3 again and installed.  It will only re-start in safe mode.  I tried everything, no matter what I do, XP SP3 causes the computer to restart in safe mode only. I'm totally frustrated. Can someone help me?

  What is the origin of XP SP3 only start in SafeMode anfter installation? What can I do to fix this?

  Continuous restarts or can only to Safe Mode boot after installing WinXP SP3?

  See: http://msinfluentials.com/blogs/jesper/archive/2008/05/08/does-your-amd-based-computer-boot-after-installing-xp-sp3.aspx

  [NB: the above has been updated several times and now includes "a small tool that allows to detect the problem IntelPPM and mitigate before installing (WinXP SP3)".]

  Possible workaround: boot safe mode and rename INTELPMM. SYS to INTELPMM. OLD.

  Other references include:

  • Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
    http://support.Microsoft.com/kb/953356
  • HP and Compaq Desktop PC: restart the computer after the display of the Stop error 0x0000007E after installing WinXP SP3]
    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.