Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

Similar Questions

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Laptop will not go to sleep when the lid is closed

  Separated from this thread.

  Same problem here. My settings say that my Toshiba will sleep when the lid is closed, but half the time is not asleep and I can feel it's hot and turns on the fan. I am so frustrated with this new laptop and Windows 8.1. Looks like too many bugs in the software or something. More I am working on the new laptop the more problems that I find, like screen discoloration as well. The forums are useless. I do what they say, and the problem is the same. Forget the call from Toshiba. Needless. Nobody will help unless you pay them money to subscribe. What customer service?

  Hello

  Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.

  This problem may occur because of any change in power on your laptop options. If the default is set to hibernation and standby modes, your laptop goes to sleep when you close the lid, but then the Hibernate timer comes in and wake up your computer first and trying to Hibernate. He cannot go to Hibernate directly from mode 'sleep'. Go into the power settings and either disable hibernation or set the timer on a higher value.

  To apply the same setting to all plans:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click choose the cover.
  3. On the page define power buttons and turn on password protection , next to when I close the lid, choose what you want your laptop to do, both when it is running on battery and when it's plugged in.
  4. Click on save changes.

  Tip: To save battery power and quickly resume working, select sleep. Sleep is a power saving state that allows a computer quickly resume the operation of full power (usually in seconds) when you want to start working again.

  To apply a setting to a specific regime:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click change plan settings for the plan you want to change.
  3. On the change settings for the plan page, click change advanced power settings.
  4. Advanced settings tab, expand it cover and the Power button, action lid, choose what you want your mobile PC to do when you close the lid, for when it runs on battery and when it is plugged in, and then click OK.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• T500 does not wake from sleep mode

  My T500 (2241-3XU with Win 7 64 bit Ultimate) has never been able to wake mode 'sleep', once the lid is closed. I have finally returned to the use of hibernation, but I was just wondering if there is a new patch that I'm not aware of. I tried to find info a few years back before hibernation. Any ideas?

  Thank you.

  Dave

  Try to install the latest version on it. 1.62 should collaborate with the T500 however.

  You can also see if your BIOS is up to date.

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• W510 does not wake from sleep

  When I close the lid or let it expire and go to sleep he does not wake up when the cover. It doesn't happen every time, but it happens about 8 links on 10.

  You can tell it's still on, but the screen remains black.

  I searched and didn't find any resolution that worked for me.

  A recommendation was disable incident reports, and that did not work.

  I preformed also all updates of the firmware as well as the upgrade to windows 8.1.

  The problem is exactly the same point 8.1 as it was in windows 8.

  Just to follow up.

  I did a factory reset the origin of windows 8 and the problem disappeared.

  I think it may have been originally caused by my being too aggressive when bloating. I have uninstalled something I shouldn't that caused the problem in the first place.

  In any case;

  problem solved.

• Dell Studio 1555 eject button does not?

  I just bought the new Studio 1555 laptop and eject key never works, now if I need to eject the CD I have to goto my computer right click on CD drive and eject.

  I try to connect the dell support but did not help, someone knows why this Eject key does not? is it a hardware problem or something to do with Windows 7?

  I have the same laptop and same problem. After searching the web for a while, I would try anything. After the installation of Dell Quickset, it worked. So go to the download page for Dell and select your operating system and go to the request to download. Mine is Windows 7, 64-bit, I can download it here. http://support.Dell.com/support/downloads/DriversList.aspx?OS=W764&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=STUDIO1555&hidos=WLH&hidlang=en&TabIndex-online if this link does not work, go to the Dell support page and look for quick adjustment.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• Satellite L750 freezes constantly and often does not wake from sleep

  Hello

  I have laptop Toshiba Satellite L750 - 1 L 8 with Windows 7 Home Premium x 64,.

  Since I have (about a year and a half), it freezes sometimes that I use and often not waking sleep of form. The symptoms are the same in both situations: nothing does, CTRL + ALT + DELETE does not work and there is no further assistance as the ' down in now the starter for 3 sec button. Until recently, it freezes only occasionally, but now this, so that each half-hour, which makes the computer unusable.

  When I tried the reclamation, the Toshiba service responded that the problem is in the software, so not included in the warranty and that the windows must be reinstalled.

  I did and he recovered to the factory setting, but even if the problem persists even in the authorized computer. It freezes again at least every hour.

  I don't really know that the cause could be now and I hope that someone could know and help.

  Thank you

  > I did and he recovered to the factory setting, but even if the problem persists even in the authorized computer. It freezes again at least every hour.

  Do you mean that the system hangs when using the laptop?
  This is definitely not good.

  Have you noticed a higher internal temperature?
  High temperature might affect systems and could lead to such outputs black system.
  In case you never clean the cooling fans in the past, I recommend you to use a jet of compressed air and remove dust from the air vents.

  With regard to the question of the sleep mode:
  In this case, you should check if the BIOS is updated. In case of BIOS version more recent has been published, you should try a BIOS update

• Ssatellite U300 - 13K does not wake from sleep mode

  He has had this problem with windows vista and I decided to switch to Win7, but it still has the same problem.
  He falls asleep, but then don't wake up no matter what I click.

  Can you help fix?
  Thank you

  How set you the mode standby?
  The power LED flashes when the laptop is in sleep mode?

• elitedesk 800 does not wake from sleep, performed a start rather

  HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

  After the sleep mode to not wake up the keyboard or mouse click.

  Pressing the key Power performed a clean boot from the stop.

  Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

  By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

  However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

  Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

  Hi Jaco,

  Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

  Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

  THE SOLUTION

  When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

  By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

  Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

  HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

  DVD +/-RW, keyboard, mouse, GigLAN,

  WIN8.1 Pro 64

  Thanks to all for lead me to this solution!

• X 1 yoga (and Yoga 260) does not wake from sleep

  Hello

  We got 2 x try and buy Lenovo Tablet portable Yoga (a X 1 Yoga and a Yoga 260) to assess their skills for our company, because we have the intention to upgrade many of our employees laptops. However, since we got the devices we noticed on two common problems with display and waking from sleep. Very often laptops awake properly with the screen remains black. In these cases, the backlight of the display seems to turn on, and I guess the system works somehow in the background. Put the computer to sleep again (for example, by closing the lid) makes the computer wake up correctly at the second attempt.

  Different error in the same category is when a video is running and the laptop is connected to AC - plug the AC cord is black screen while playing the media kept its content.

  All drivers have been updated to the latest version via 5.07.0029 Lenovo system update.

  Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new (!) presentation. Apparently, it seems like a driver/software problem?

  Best regards

  After finishing with a touch screen not responding not (as far as I can tell a result of v4.19 Touch Firmware Update) on top of the issue of the sleep-wake I'm frustrated and went through the process of reinstalling the entire system.

  I used the reset at startup procedure to put the system back to factory settings. After factory reset the sleep-wake issue had disappeared. I applied about all the updates that are currently available via Lenovo system update and everything still works as expected. Still strange that this issue was not solvable by any other means before...

  Interesting effect: after the reset of the touchscreen remained non-functional. After a few days without touching the laptop screen feature has finally decided to detect the HID. I certainly did not apply to update or change. 'Miracle' is almost an understatement in this case!

• Vista will not wake from sleep mode

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  Have you tried...
  Start button > Control Panel > Classic view > Power Options > go to Plan you selected, click on change plan settings > click on change advanced power settings > on this new window, use the cursor, scroll down to multimedia settings, then click on the + sign in front of him. Click on the + sign in front when sharing media > change BOTH the "on battery" and "Plug-in" allow the computer to sleep. > click OK

  Now see if the computer will go to sleep mode.

  t-4-2

• DisplayPort monitor does not wake from sleep

  Hello

  just bought a Sapphire Radeon HD 7790 & realized, I could connect three monitors - yay.

  A few times the small monitor connected via displayport has not awoken from his sleep.  I have a beep as if remove the USB device.  The monitor power on / activate suits him.

  The two monitors connected with DVI awake without problem.

  I see threads referring to assign the displayport as the initial display adapter in the BIOS, but I don't see anything in the my BIOS (XPS 435MT) for graphics cards.  The GPU (I guess it's the GPU) set the dsiplayport as the monitor #1 monitor in the numbering system.  I understand that I have no control over this.  The attached DVI monitors are numbers 2 & 3.

  Carefully analyzed the logs of events during this time & can't find anything.

  Any help?

  Thank you

  Will update & reply to this message, I hope it helps someone else.  Apparently the TriXX is OK on the 7790.

  This YouTube video is my card:

  Video YouTube TriXX of Sapphire 7790 OC double-X

  If this does not work you can try changing the power settings in the BIOS - in my case, in the BIOS power management settings is not set to the sweetest sleep state.

  Right now the ACPI Suspend Type is S3 str:

  ACPI Suspend to RAM: ACPI stands for Advanced Configuration and Power Interface - that some people may find as options in their BIOS Setup programs. The Suspend to RAM, sometimes referred to as feature S3/STR, let the PC save more power in standby mode, but all the breast where the computer-related devices must comply with ACPI. Some BIOS have a S1/POS option for this scenario. If you enable this feature and you are having problems with the splash screen, just go back into the BIOS and disable. (not one of my options)

  Definition of ACPI to form of hunger more power to suspend for example s1 (POS) of power in standby mode could be the answer:

  S1: All processor caches are flushed, and the CPU stops the execution of the instructions. The power of the CPU and RAM is maintained. Devices that do not indicate that they must stay on can be turned off.

  S3: Commonly known as secondary, sleep or Suspend to RAM (STR). RAM remains powered.

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?