Laptop doesn't recognize or read mp3s or CD/DVD!
I have a laptop Compaq Presario 2200 and I have problems with my laptop recognizing my mp3 player is connected. My computer beeps when its plugged in, but does not appear in the my computer or any other file file at all. I even did a search for mp3 files. He did this with all the mp3s (old and new). Ive tried all the USB ports also. He has also done the same with CD/DVD. Other computers recognize the CD/DVD and mp3s. My laptop has a virus or what?
Hello Giaboo,
We have service packs so that we can ensure that the necessary corrective measures are in place.
If we have a problem with the feature in Windows 7 so we want to make sure that these fixes are in place.
You can also go to the web site of the manufacturer of the hardware to download drivers updated to the CD player.
Best regards
Matthew_Ha
Tags: Windows
Similar Questions
-
My Sony vio laptop doesn't recognize USB storage?
My Sony vio laptop doesn't recognize USB storage?
Is it a USB 'ding' heard when you insert the USB storage device? If so, you then have to make right click on my computer, select manage, then disk management, look on the right side and the storage of the assign a drive letter.
-
Laptop doesn't recognize the printer hp officejet laptop connected through ethernet
New HP Pavilion computer laptop does not recognize my printer HP Officejet Pro L7590 that is connected via ethernet. Also, I have a Comcast modem and could not connect to the printer connected to modem either. Therefore, can not connect via modem or ethernet with the direct printer connection.
Have you set the printer as the default printer?
-
Computer HP laptop doesn't recognize not hard
Hello
I have a HP 620 (Pentium D 2, 3 GHz, 1 GB Ram) and it does not recognize the hard drive. The battery does not seem too much work.
If I try to install Windows, it is said that it found no hard drives. The test of diagnosis in the BIOS says the same thing.
The DVD player is as ugly as * beep *.
Do you guys some tips about the cause of this problem.
System information screenshot below
You have entered the UEFI PC Diagnostics to see if components tests show the hard drive?
Considered remove the original hard disk, and then reinstall it and try again see if it is recognized like beong installed?
You can also put another hard drive to his place to see if it is recognized.
Is your laptop still under warranty? warranty status
-
It shows:
This device is not configured correctly. (Code 1)Access is denied.To find a driver for this device, click Update driver.pls help :(Did you also remove your battery?
You have invited tol the driver update, what happened when you click on put updated driver? Error message?Try running the Fixit:
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-deviceIf that would not work, go to Device Manager and uninstall (right click, uninstall) all devices under USB controllers. Restart the computer, it must be reinstalled.
You can also try to go to disk management and see if readers appear, you may just assign drive letters:
Change, add, or remove a drive letter
http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letterHow to use Vista disk management
http://www.windowsreference.com/Windows-Vista/how-to-use-disk-management-in-Vista/ -
BIOS doesn't recognize the new drive to CD/DVD on TECRA S1
Replaced my default drive SD-R2412 with a new SD-R2512. Unfortunately, when I boot the drive is not recognized. Any help or advice gratefully received.
Thank you very much
Kevin
Hello
Don t think you would be able to solve this problem without to replace the CD/DVD drive again.
You get an IDE #1 error message. Am I wrong? This happens because your CD/DVD drive supports master/slave/c-salt settings wrong!
Because no compatible settings BIOS cannot recognize it properly.In your case I would contact the local ASP for more information on compatible CD/DVD players and get a new one.
Good luck
-
I tried to change the numbers of the registry editor. He has worked for the CD, but not for the DVD. I also used the Microsoft Fixit but without success. Can you help me please.
Hi KenBilodeau,
See this:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
http://support.Microsoft.com/kb/321641 -
Re: DVD recorder has changed and the laptop does not recognize
I had to change my Toshiba Qosmio F20 portable recorder.
Now, the computer does not recognize.I installed a DVD burner Sony Optiarc AD - 7590 IDE.
I heard that the problem may be in the BIOS, I have the latest TOSHIBA for this laptop (which is installed V.1.40 2007) and the recorder comes with the manufacturing date of 2009.I currently use Windows 7 on this computer.
Is it only possible for the computer recognizes it, "any driver or driver I install?Hello
Talking about this laptop doesn't recognize, do you mean on the Bios or Device Manager or both?
-
How can I get my E drive working again? I inadvertently stopped a backup file and ejected from the disc without it completed stopped. Now, he does not recognize the disc. Please help me. Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.
Hello
Check with the support of Compaq, their online documentation and drivers and their forums for
known issues.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.
Original title: CDs? DVD not recognized
My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive. No error message does nothing! ???
Sorry my bad https://support.microsoft.com/en-gb/mats/cd_dvd_drive_problems/en-us , Ric (I've corrected the link as well)
-
I installed Photoshop CS5 on a new laptop, but it doesn't recognize my RAW files. In addition, repeated attempts to make available updates failed. The laptop has 8.1 Windows 64-bit.
You can manually download and install updates:
Adobe - Photoshop: For Windows: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5
Adobe - Photoshop: for Windows: Camera Raw 6.7 update
There is something to do with the help of CS5 > update function, but as far as I know it does work as expected more.
-
Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?
Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?
I have loaded a series of MPEG-4 audio layer files on my rocket. I can see them on the "rocket" when I consider my computer but not the "rocket" itself.
Anyone know what I'm doing wrong?
Thank you
Donn
The Sansa times .mp3, .wma. OGG, FLAC and .wav. It cannot decode m4a or mpeg-4.
Are downloads of iTunes? Apple doesn't want read you elsewhere on your computer and whatever this dopI little pocket music player they do is called? M4a and .aac are owners of Apple formats.
You must extract these files from CDs in mp3, or if you do not have CD you will need to convert m4a to mp3. Download the free media encoder and conversion (transcoding) these files mp4 to mp3 high quality, 192 Kbps or higher. If you use more low-quality mp3 will save you space, but the sound quality will suffer.
And if you use iTunes to rip a CD, you can change the settings (in Edition/Preferences/Advanced/import music, which differs from the advanced visible tab) to mp3 instead of m4a files when rip you.
If your files are m4p, the p is for protégés who are protected against copying the files, which means that you're not supposed to move on another device. The only way to convert is to go into the underground world of pirate.
-
Gigaframe L80 - Windows doesn't recognize it as a second monitor
Hello
I have a Toshiba Gigaframe L80 but is not fully functional.
Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
Only works in clone mode.I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.
Can you help me?
Is there a driver/software/firmware for the L80 was updated to fix?Anyone with the same problem?
Hello
I found this info:
Sub visualization allows the Gigaframe to act as a second monitor for your PC
To activate the view Sub follow these steps:
(1) install subview on the laptop.
(2) in the main menu of gigaframe select settings, then press OK
(3) select subview and press OK
(4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
(5) connect the GigaFrame to your PC with the supplied USB cable
(6) run the subview on your PC software
(7) the display of Sub pop window, display the current screen display in the gigaframeBy activating the function void View the willing Gigaframe of two display modes:
Scope and the Clone mode.To assign the suffixe_etendu mode_ Gigaframe follow these steps:
(1) right click on the desktop and select properties from the menu
(2) in the display properties panel select the settings tab
(3) under the view drop-down list, select 2. default monitor on Subview
(4) check the option extend my Windows desktop on this monitor and the bottom of the settings tabNote: in extended mode screen gigaframe becomes your office extensions!
To set the Gigaframe in _Clone mode_ follow these steps:
-Uncheck the extent my Windows desktop on this monitor option!The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!
Love let you subview job function properly, please consider to stop your acceleration DirectX function! _
If you want to play the video on the Gigaframe, you must select it * as primary monitor! *
-
My laptop does not recognize new Sandiscs - what am I missing
I recently bought 3 new Sandisk SD Ultra 16GB 10 speed but the card reader in my computer hp laptop Windows XP, does not recognize them.
They work fine in my camera.The original disks are 2 GB and they work fine in the camera and the computer.What Miss me?You don't mention what service pack you have, but if you have sp 3, the most likely reason is that the card reader in your laptop is too old to read new (> 2 GB) SDHC cards. Connected by USB readers are fairly inexpensive, just be sure that the one you get includes the ability to read SDHC cards
-
My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera
My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera. And also on Device Manager I do not find the Image device where I should find the camera
Hello...
If you have already tried the factory reset, it might be a hardware problem with the webcam. In this case, you will have to send the laptop for repair.
Maybe you are looking for
-
I just installed my HP Envy and wanted to set up a recovery disk. The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say. It shows a recovery screen for a laptop of Win8 with the source of rec
-
I installed the drivers for my Equium M40X but I can't hear sound when I play music.What is the problem? Please help me solve this problem.Thank you
-
I can not open HP Deskjet 3050 a scanning software
I have a HP Deskjet 3050 has. It has a software build-in for analysis. It is very useful, but I can't open it now. I don't know why. I also have an error message shows "cannot find module HPstatusBL.dll, RunDllEntry"(something like that) when I start
-
Servers blades Cisco and BS chassis house?
Or they re-brand? They are manufactured by HP, IBM, Cisco, etc. ? Basic question, but I wonder if they have renamed them as they do the serial MCS Unified Communications servers. Thank you!
-
Dear all,I have create a LOV in my code field that is a primary key at my table. And I can't return the value from the lov,I get the below error.oracle.jbo.InvalidOperException: Houston-29114 ADFContext is not configured to process this exception mes