Laptop fails to automatically connect to the wireless router.

Similar Questions

• I received a message on my laptop computer that says not able to connect to the wireless router.

  I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

  I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• Comouter is no longer automatically connects to the wireless network.

  Until recent netbook Hannsbook my wife automatically connected to our wireless network when turned on.  We recently took a trip and used a different wireless network.  Back home, he is no longer automatically connect when turned on.  Software Troubleshooting in the Windows 7 Home Premium says he has been "manually disconnected' and it restores the connection.  I deleted all the other networks wireless to the computer.  Page manage wireless networks correctly identifies the network and says it should connect automatically.  BUT IT'S NOT!

  Once connected, the router works fine.  The connection is NOT lost when the computer goes into power saving mode. How do we get to resume its old custom to connect automatically when the computer is powered?  My wife is a technophobe and have to mess around to make the connection can be the drop of water!

  Hi Stuart,

  Do you have an error message when you try to connect to wireless networks?

  Perform the steps suggested by don241 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Answer please if you have any questions.

• Satellite A105 - unable to connect to the wireless router more

  I had the success of connection to a router Wireless Linksys for the last few months. Today, that I couldn't connect to the Linksys still another. A few times I have to connect to the Linksys router, but I got a weak signal so I would be disconnected. The green bars on the router Linksys under available networks are all solid green full bars, but I can't? t connect.

  To do or check to login once more?
  Thank you

  HM, you will need to do some research! What was the last you´ve installed applications? Installed new drivers/tools/software on your computer?
  If not you already installed the latest drivers for the chip wireless for your laptop? If not already done, then try it and Don t forget to update BIOS. :)

  If anything brought success then just to give a few comments. :)

  Welcome them

• no internet but not connected to the wireless router

  I have 400 SL with windows vista installed.
  Everything worked well for years, until a few days ago.
  It is the symptom, and what I've done:
  1. the laptop CAN connect to the wireless network, no problem, very strong, just signal has no internet.
  cannot ping google.ca.
  In network and sharing Center:
  Computer---> network---> Internet
  ^                   ^
  |                     |
  Red Cross OK
  2. all other devices (iphone, ipad, other laptops) can connect to the network and internet.
  3 did a system restore on the eve of this stoppped working. always the same.
  4A bought a wireless adapter, always the same. but it works fine on the other laptop
  5 tried to set a static IP, subnet mask, gateway, still the same problem.
  6. any other device can ping each other with the exception of this laptop...
  7. the seller cordless tool is uninstalled (Lenovo connection management tool)
  8 rebooted a million times between all the steps
  9 safe mode with network has the same problem.
  10 tried to use other wireless, still the same problem...
  need help...
  Thank you
  -Virginia

  Hi Virginia,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the problem, I understand that you can not connect to a wireless network on windows vista computer.

  I appreciate your efforts on this issue, however no need for you to worry we are here to help and guide you in the right direction.

  Help me with the information below.

  -Don't you make changes on the computer before this problem?

  I suggest you to disable temporarily security software and then check if you are able to connect.

  Method 1

  You can also temporarily disable the security software and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  Method 2

  Reset the router and see if that helps.

  Note: to help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  You can see this help article.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I bought a Sony BDP - S185 connect Netflix Blu - ray player. I can't connect to the wireless router. Why?

  I just bought the blu - ray BDP S-185 drive so that I can access the internet (netflixetc.) on my new samsung tv. I tried to connect to my wireless router, but repeat me my connection type iswired and the connection has failed. Can I connect this player to a wireless router or should it be connected to the router? Difficult because the router is in the basement and the television on the third floor. Can I use the separator on phonejack (existing in the 3rd and.) and connect the two phone and blu ray player or do I need a netgear typedevice to connect this player? Thank you in anvance understand help. Sorry, it's so rambled butI am very confused here!

  Hi Robert,.

  Welcome to the community of Sony!

  This Blu - ray player is the BIV (Internet Video base) base model and does not support the wireless Internet connection. I suggest that you use the Ethernet LAN cable to connect the player to your router/modem.

  Thank you for your message.

• HP photosmart 5520 cannot connect to the wireless router

  The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

  The structural 'found ssid network name' report, said down

  But "current configuration" has shown the SSID

  can anyone offer a fix?

  Help

  colleenmercy

  Hi colleenmercy,

  In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

• Unable to connect to the wireless router

  I can't connect to my wireless router.  My PC shows that the router has an excellent signal strength. The password is correct, but it will not connect.  What Miss me.

  Moved from Explorwer Internet

  Original title: wireless network device network Ethernet network router

  Hi Trisha,

  Many routers need firmware updates to work with Windows 7. Maybe it's the issue.

  Please answer these questions:

  1. What is the brand and model of the router?
  2. If it works much earlier?
  3. Any changes made to the computer before the show?
  4. What is the exact error message received when you try to connect to the router?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Set up a wireless router

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Setting up a wireless router
  http://resource.Dlink.com/connect/setting-up-wireless-router/

  Post back with the State of the question.

• Older Acer laptop is no longer connects to the wireless network.

  I have an older Acer, an Aspire 4520 laptop.  When my ISP (Qwest) replace my router and the modem with a modem/router all-in-one (Westell 7500), the laptop was the one computer in the network which was not able to connect.  He does not reject the password (if I type in the right), but tells me my connection attempt has timed out.  I typed the password wrong once to see what would happen and he told me that the password has no agreement with that of the router.  In any case, I connected the computer to the internet, then tried the fix to http://support.microsoft.com/kb/928233running, but that did not work.  I looked my material and saw that the Atheros AR5007EG Wireless Network Adapter and the NVIDIA nForce Networking Controller were working properly.  I did not cheat with the dissemination in the registry setting, because I don't really know where to find it or what to take if I did.  In addition, the computer logs on other networks without wire (at McDonalds).  Any ideas out there?
  Keith

  Hello

  Follow the steps mentioned below and check if that helps.
  Method 1: temporarily disable the Antivirus and firewall and check out them.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2: Follow this link and check if that helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03
  Identify and resolve home network problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/identify-and-resolve-home-network-problems
   
  Method 3: Reset TCP/IP (Transfer Control Protocol / Internet Protocol) settings
  TCP/IP can sometimes become damaged or altered.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  
  Reference: Troubleshooting network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   

• Laptop (windows 7) doesn't recognize computer (XP) desktop network, but connects to the wireless router

  I have two computers (desktop and laptop), a plug-and-play printer connected to the desktop computer and a wireless router.  My laptop was connected to the printer via a family group on the network connection.  I've recently upgraded the OS on my laptop from Vista to Windows 7 and now my phone does not even recognize the MSHOME network which was initially established.  I am able to connect to internet via wireless router (Verizon MIA 424 - WR... or something like that) but I can not connect to desktop files, devices on it and above all terribly printer.  What's weird, this is my office always recognizes my laptop and can even connect to my laptop from my desktop.  The network is established by the office which is running XP.  Not sure if this helps, but I remember when I set the laptop computer connection / original printer, I had to do a port mapping step funky.  Any help would be greatly appreciated!  FYI, I did everything suggested by microsoft windows help.

  NET

  Hello

  To access the XP of Windows 7 computer, you can:

  a. type the name of the XP computer in the Start > box Search in this format:

  \\computer

  b. press the Windows key + R and type the name of the XP computer in the same format.

  c. click Start > network , then click on the XP computer.

  For more information on the networking of computers running different versions of Windows, see this article:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Connectivity of the wireless router problem

  I have a Cisco's Linksys WRT160N wireless router.  After it is up and running, all my wireless devices work fine.  My sons Wii for my laptop, my wifes iPod Touch. But the strangest thing is happening.  I have problems connecting to the internet with my desktop computer that is hard wired to the linksys router.

  Often I can connect any... other times it's quite slow compared to when I plug my office directly to a cable modem.  Finally, sometimes certain aspects of the Web page will appear while others won't.

  Question: Is damaged?  Or is there something that I am missing.  You would think it would be right forweard enough... OH, I have also replaced the cables from the desktop to the router and have already done all the reboot that I care to do as well as redo the ip address in the part of the repair of my control panel.

  Any ideas?

  Access the Page of configuration of your router and lower the MTU size of the router to Auto/1500 to 1400.

• HP6110 printer connection to the wireless router, USB port

  I have a HP Officejet 6110 all-in-one printer, a Toshiba laptop running Windows 7 and a CGN3ROG Hitron of wireless router.

  I try to get the printer on my home network by plugging it into the USB port on the router. I can't make it work. Has anyone managed to do this?

  Derek

  Hello Cheetah12,

  Thank you for your response. Yes, my printer - HP6110. I have read the manual you sent me and understand that I can not connect directly to the router with print server - print server HP JetDirect 175 x Rogers, tells me that the router is turned on print server. I'll have to break down and buy a wireless printer. The networks of the great printer if I connected to a computer.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• B210A Photosmart - server connection error and does not connect to the wireless router

  I have problems setting up and to connect my router to my new printer b210A. Everything goes well with the initial configuration, and when asked to connect to the network at the start, it works. Then he said that the printer requires updates, downloads of updates, reboots, asks me if I want to activate eprint and as soon as I said 'Ok', I get a "the server connection error" and it is then no longer connected to the network. When I get out of the "server connection error" screen and attempt to reconnect to the network, he says 'Success', prints a Test report wireless, but never connects.

  It's the 2nd printer that I have had in a week, given that the person of HP online chatting told me my first printer had problems of "hardware", after experiencing the same problems and I'll be recommended. So - I did, and now I'm running into the same issues. The number of 800 was NO HELP - after recommended I have unplug and reconnect, then telling me there were server errors (when the printer was not connected to the network).

  We will set an IP address of the printer with a special focus on DNS domains:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.