Laptop freezes when restored from sleep mode.

Similar Questions

• Satellite A100-049 screen remains empty when reactivated from sleep mode

  Intermittently, have been left for a while my screen A100-049 remains empty when reactivated from sleep mode. It does not meet the access keys and have checked the settings which seem to agree.

  Notice that in this case the power button remains 'blue' and not to return to 'Orange flashing. Is this a common problem?

  Hello

  What do you with the mode 'sleep'? Do you mean the hibernation mode or the mode booth? What operating system do you use?

  Listen buddy. It's really not easy to say why it happens without running diagnostic tests. I think you should try to update the graphics driver and check if you are using the latest version of the BIOS. Two updates might be useful in resolving these issues

  Good luck

• The menu bar clock freezes after recovery from sleep mode

  After the upgrade to Sierra, I noticed that the clock in the menu bar (top right) show wrong time.  This occurs when the iMac comes out of his SLEEP.  When I hoover the pointer of the mouse on the clock, it would turn into a spinning ball (i.e. no response).  I have to disconnect and reconnect so that the clock in the menu bar to indicate the correct time.  She would continue to work until the next time that the iMac comes out of SLEEP.

  Anyone facing this problem?

  Have you tried booting in safe mode (hold down the SHIFT key at startup)? The problem persists?

  If you create a new user account, does?

• Sony Vaio laptop BSOD when waking from sleep. 8.1 64bits

  Hello

  My Sony vaio is strange. Whenever I put it to sleep and it wakes the BSOD while it recharges to the 'not found operating system". Now the power button down for 30 seconds and then it turning it back makes me back in the operating system without any problem.

  I've updated the BIOS and run that all pilots availible to do this and the model.

  I also reset the BIOS to the factory settings.

  I have also reinstalled the operating system.

  VPCSA290X

  Everything works well except the mode 'sleep'.

  Nobody has any ideas? OK, Im going to the customer and to recommend that he not spend a dime on Sony laptops in the future. His name is Dayne Sampson.

• Mouse pointer freezes when returning from standby mode. I have to restart to solve this problem

  I re install mouse drivers. Everything else seems ok

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• Apple TV 4 is not connect to wifi when return from sleep mode

  When I turn on my Apple TV 4 is not to connect to any wifi NET. If I search for it, it does not appear. However if I take the Apple TV, it is already connected. It's a little bother doing this several times...

  I'm afraid that there are already several discussions on this problem. Search for 'sleep' and 'network' or 'WiFi '. But it doesn't seem to be a solution. It seems to have started with tvOS 9.2, which I assume you have. And it affects all ATV 4, so it's something to do with your ATV settings or the configuration of the network, but I don't know what it is. Please report it to Apple to the https://www.apple.com/feedback/appletv.html . We hope it will be fixed with an update tvOS.

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Laptop with Windows 7 not waking from sleep mode-impossible to repair the files

  My laptop has been not wake sleep for the last days. I think it may have something to do with a recent update. I ran scan SFC who originally gave me the error "Windows resource protection could not perform the requested operation." After using "chkdsk /f/r" the SFC scan was able to complete and it finds corrupted files. Here's what she has (don't know if files below are the same):

  2015-02-24 22:37:35, CSI Info 0000010b transaction [SR] beginning verify and repair

  2015-02-24 22:37:47, Info CSI 0000010 d [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011a [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:37:57, CSI Info 0000011b [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:37:57, CSI Info 0000011e [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  2015-02-24 22:44:04, CSI Info 000001e5 transaction [SR] beginning verify and repair
  2015-02-24 22:44:07, 000001e7 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001e9 CSI Info [SR] cannot repair the military record [l:20 {10}] "mfc42u.dll" Microsoft-Windows-MFC42x, Version = 6.1.7601.17577, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2015-02-24 22:44:07, 000001ea CSI Info [SR] this element is referenced by [l:150 {75}] "' Package_2_for_KB2506212 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.1.1.2.2506212 - 4_neutral_GDR" "
  2015-02-24 22:44:07, 000001ed CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\windows\System32"\[l:20{10}]"Mfc42u.dll '; source file in the store is also corrupted

  Any help would be great!

  Hi Esque,

  Thank you for the information.

  Please let us know if you have followed the troubleshooting procedures provided in the response ofVitoux K replied on 6 March 2014. (given in my previous post)

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/unable-to-wake-the-computer-from-sleep-mode/6054e168-6f56-43A9-a8c1-5a01e9a288fc

  If the problem persists, suggestions, please follow the link above and let us know the results.

• CS5 frozen when iMac wakes from sleep mode

  This problem just started, and I don't know if that's a problem INDD or Finder. When I wake my computer from sleep mode and try to access the INDD, I can't. I click on the application icon in the Dock and it will not come to the front. All my other apps will be. I have to force quit smoking INDDD every time, and then reopen it. It is if I have a document open or not. I tried to zap the PRAM and closing, unplugging everything and starting up but none of those who have helped. Any tips or ideas of what could be wrong?

  Best to post the actual URL. I guess it's: http://pastebin.com/raw.php?i=d6TgEEMv.

  In any case, the two diagnoses are quite revealing. For after the accident report:

  Thread 0 Crashed:  Main Thread  Dispatch queue: com.apple.main-thread
  0   libSystem.B.dylib                  0x96475aa2 __semwait_signal + 10
  1   libSystem.B.dylib                  0x9647575e _pthread_cond_wait + 1191
  2   libSystem.B.dylib                  0x964773f8 pthread_cond_wait$UNIX2003 + 73
  3   ...extensis.cpp-core-framework     0x2552e640 GCondition::Wait() + 48
  4   ...extensis.cpp-core-framework     0x255d1e6a GThread::StopThread(bool) + 214
  5   ...extensis.cpp-core-framework     0x255d36d1 GThread::~GThread() + 45
  6   ...extensis.cpp-core-framework     0x25555d4e GIPCClient::~GIPCClient() + 1214
  7   ....ExtensisFontManagement.sdk     0x25a99854 GAgentIF_IPC_Impl::~GAgentIF_IPC_Impl() + 34
  8   ....ExtensisFontManagement.sdk     0x25a98b5b GAgentIF::~GAgentIF() + 113
  9   ....ExtensisFontManagement.sdk     0x25823b42 boost::detail::sp_counted_impl_p::dispose() + 24
  10  ...extensis.cpp-core-framework     0x2552ad9f boost::detail::sp_counted_base::release() + 37
  11  ....ExtensisFontManagement.sdk     0x25823cd5 void boost::shared_ptr::reset(GAgentIF*) + 79
  12  ....ExtensisFontManagement.sdk     0x2581dacb GMystiqueSdk::CreateAgentIF(boost::shared_ptr&, unsigned long) + 95
  13  ....ExtensisFontManagement.sdk     0x257b03d3 GMystiqueConfig::GetRunningAgentProductMode(GMystiqueConfig::EProductMode&) + 121
  14  ....ExtensisFontManagement.sdk     0x257b72ca GMystiqueConfig::GetIsAgentRunningByProductMode(GMystiqueConfig::EProductMode, bool&) + 746
  15  ....ExtensisFontManagement.sdk     0x257b8635 GMystiqueConfig::GetIsCoreAgentProcessRunning(bool&) + 33
  16  ...Management.plugin-interface     0x25388601 GetIsCoreAgentProcessRunning + 28
  17  ...is.AutoActivationPlugin.ID7     0x24beac0c CoreAgentInterface::ProcessNotifications() + 232
  18  ...is.AutoActivationPlugin.ID7     0x24bdab16 SuitcaseIdleTask::RunTask(unsigned long, IdleTimer*) + 710
  19  ...adobe.InDesign.AppFramework     0x1a75ff85 GetPlugIn + 242005
  20  ...adobe.InDesign.AppFramework     0x1a760eac GetPlugIn + 245884
  21  ...adobe.InDesign.AppFramework     0x1a702e78 0x1a700000 + 11896
  22  ...adobe.InDesign.AppFramework     0x1a7285fa GetPlugIn + 14282
  23  com.adobe.InDesign                 0x000028ab main + 187
  24  com.adobe.InDesign                 0x000027c6 start + 54
  

  This is the plugin Extensis Suitcase Fusion self-actuation!

  So, disable it to confirm. Make sure that you use the latest version and if so, take up with Extensis. I think they have a free support on their web site.

  In addition, you must update InDesign to 7.0.4 you run 7.0.3 and there were a lot of bugs.

• Computer Vista freezes / crashes when waking from sleep/hibernate. I installed the latest drivers. Any thoughts?

  I also checked the event viewer, and it has a critical error.  Kernel-power of the source.  Event ID 41.  General description: "the last sleep transition was unsuccessful.  "This error can be caused if the system unresponsive, failed, or power during the transition from sleep loss."  Does anyone have an idea as to what this may highlight or where to look next for more information?

  Hi Helpme_971,

  1. did you of recent changes on the computer?

  You can try these steps and see if it helps.

  Method 1:

  Step 1:

  You can try to check if the problem occurs in safe mode.

  Start your computer in safe mode

  Step 2:

  If you are not faced with the question in safe mode, then you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can also check the following items and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Satellite A500-18 x - don't wake up from sleep mode

  I've had this laptop for a little over a week and when it goes into mode 'sleep' trying to wake him up, all the lights on the keyboard lights up and I hear it works but the screen remains black. I updated display drivers and that fixed it for a few days but now it stopped working again. updated audio drivers would force it to not wake from sleep mode kos that he worked well, since I've updated the display driver and then yesterday I updated audio drivers and he returned to not wake up once again in mode 'sleep'. any help much apreciated.

  Updated the BIOS and update the driver to display again.
  Maybe the after the audio driver that something was wrong, you can clean the registry using CCleaner in most of the cases it s a good idea.

• New installation of 8.1 on Y510p guard pro wake up from sleep mode

  Any ideas on why a fresh install of windows 8.1 vanilla pro would keep wake up from sleep mode? What spectator even can I look at to understand this?

  It seems that turning off sleep timers solved my problems. I also disabled standby (but not sleep) when it is plugged in and the laptop stay asleep until he does it's nighty WHS backups and then fall back to sleep now.

• USB-232/4 causes Windows hang when wake from sleep

  I have a problem of resumption of the functioning of the laptop that follows "sleep" or "hibernate".

  With the connected USB-232/4, the computer does not return the Windows normally.  The display does not return (without backlight or external video output), but the LED indicators (bluetooth, disc, power, etc.) appear normal.  When I remove the USB from the USB-232/4, the display reverts immediately to the State before the mode 'sleep' activated.  Tried all 3 USB ports - all the same behavior.  No index by using the event viewer.

  Win 7 (64 bit)

  Series NI 3.7, NEITHER VISA NOR spy 2.7.2 5.0.2 MAX 4.8

  Serial port assignments seem to be OK:

  Port 1 - com15

  2 port - com9

  Port 3 - com16

  Port 4 - com8

  Any suggestions on the next steps to solve this problem?

  Thanks in advance.

  Solved the problem!

  The BIOS has a setting in the section advanced to Wake Up capability.  Compatible USB S3 Wake.  Now, the USB-232/4 is powered over the recovery of the standby mode.  When this feature is disabled, the USB-232/4 light not upon resuming from sleep mode and probably hung up the pilot, preventing a normal recovery.