Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)
Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!
I was able to solve the problem with the microphone on the G60-549DX when using Skype. I spend up to 6-8 hours, talk with convenience stores of HP. They were very friendly and helpful. The same help a friend. My friend downloaded updated bios and micro drivers. HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone. Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy. It's a good computer I can say. The technicians were all very friendly and helpful. They called me several times to check to see if it still works OK! They are HUGE! They want to help with any other question, I have perhaps with the computer. Thank you very much for the help. Everyone was SO helpful.
Tags: Notebooks
Similar Questions
-
Question about ACL's with the 2621 when using site to site VPN
I set up two site to site vpn. We have an ASA at our headquarters and branches will IOS routers - one is a 1811 and the other 2621. Both are running the latest versions of IOS, respectively. The two VPN site-to-site do not work. I have a list of inbound on the external interfaces of both routers, access that allows only the IP address of the ASA IP traffic. All other traffic is denied. I put NAT overload upward in the typical form, and I use ip outgoing inspection on the same interface, to allow incoming traffic back to surfing the internet. This configuration works very well with the 1811, where all traffic is blocked except traffic IP (IPSEC) coming from the ASA. Guests at our headquarters can reach hosts behind the 1811 and vice versa.
Here's my problem: the 2621 is processing traffic encapsulated on the external interface and block this traffic because it does not match. I know because when I turn on logging / debugging on the 2621, I see inbound traffic blocked by the ACL. Technically, I guess that it does not, but to this interface, the traffic is always encapsulated so I think it fits to this access list and then go to the Cryptography decapsulation card and be sent to the destination host. Just as it does on the 1811. I have not 'wan' t to create another line in the access list for all subnets to Headquarters. Why is not it works the same way as it does on the 1811? Is there something else I need to activate?
------------------------------------------------------------------------
Config of 1811:
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
!
hostname BranchVPN1
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
activate the default AAA authentication no
authorization AAA console
AAA authorization exec default local
!
AAA - the id of the joint session
no ip source route
IP cef
!
!
IP inspect the audit trail
inspect the IP dns-timeout 10
inspect the name IP internet udp timeout 30
inspect the name IP internet tcp timeout 30
inspect the name IP internet ftp timeout 30
inspect the name IP internet http timeout 30
inspect the name firewall tcp IP
inspect the name IP firewall udp
inspect the name IP firewall icmp
IP inspect the dns name of the firewall
inspect the name IP firewall ftp
inspect the name IP firewall http
inspect the name IP firewall https
inspect the IP firewall name ftps
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
!
IP domain name xxxx
!
!
!
!
username xxxxxxxxxx
!
!
!
class-map correspondence vpn_traffic
police name of group-access game
!
!
VPN policy-map
class vpn_traffic
in line-action police 2000000 37500 pass drop exceeds-action
!
!
!
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 2
ISAKMP crypto key address xxxx xxxxxx
ISAKMP crypto keepalive 10
!
life crypto ipsec security association seconds 28800
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac xxtransform
!
xxmap 10 ipsec-isakmp crypto map
defined peer xxxx
Set transform-set xxtransform
PFS group2 Set
match the address tunnelnetworks
static inverse-road
!
!
!
interface Loopback0
172.16.99.1 the IP 255.255.255.255
!
interface FastEthernet0/0
Description Connection to Internet (DHCP)
DHCP IP address
IP access-group outside_in in
no ip redirection
no ip unreachable
no ip proxy-arp
inspect the firewall on IP
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
xxmap card crypto
!
interface FastEthernet0/1
Description of the connection to the local network
address 172.20.1.1 IP 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
VPN service-policy input
!
interface Serial0/0/0
no ip address
Shutdown
No cdp enable
!
interface Serial0/1/0
no ip address
Shutdown
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 dhcp
!
no ip address of the http server
local IP http authentication
no ip http secure server
IP nat inside source list nat - acl interface FastEthernet0/0 overload
!
IP nat - acl extended access list
refuse any 10.0.0.0 0.255.255.255 ip
allow an ip
outside_in extended IP access list
allow udp any eq bootps host 255.255.255.255 eq bootpc
allow an ip host (ASA IPADDR)
deny ip any any newspaper
IP extended access list police
deny ip host xxxx any
deny ip any host xxxx
IP 172.20.1.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
tunnelnetworks extended IP access list
permit host 172.16.99.1 ip 10.0.0.0 0.255.255.255
IP 172.20.1.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
!
recording of debug trap
logging source-interface Loopback0
exploitation forest xxxx
access-list 160 note t is
not run cdp
!
!
control plan
!
Banner motd ^ CCAuthorized technician!
^ C
!
Line con 0
line to 0
line vty 0 4
exec-timeout 5 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 5 0
Synchronous recording
entry ssh transport
!
Scheduler allocate 20000 1000
end------------------------------------------------------------------------
2621 Config:
!
version 12.3
horodateurs service debug datetime msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
!
hostname BranchVPN2
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 notifications
no console logging
!
AAA new-model
!
!
AAA authentication login default local
activate the default AAA authentication no
authorization AAA console
AAA authorization exec default local
AAA - the id of the joint session
IP subnet zero
no ip source route
IP cef
!
!
IP domain name xxxx
!
IP inspect the audit trail
inspect the IP dns-timeout 10
inspect the name IP internet udp timeout 30
inspect the name IP internet tcp timeout 30
inspect the name IP internet ftp timeout 30
inspect the name IP internet http timeout 30
inspect the name firewall tcp IP
inspect the name IP firewall udp
inspect the name IP firewall icmp
inspect the name IP firewall ftp
inspect the name IP firewall http
Max-events of po verification IP 100
!
!
!
!
!
!
!
!
!
!
!
!
username xxxxxxxxxxxx
!
!
!
class-map correspondence vpn_traffic
police name of group-access game
!
!
VPN policy-map
class vpn_traffic
in line-action police 2000000 37500 pass drop exceeds-action
!
!
!
crypto ISAKMP policy 10
BA aes 256
preshared authentication
Group 2
ISAKMP crypto key address xxxx xxxxx
ISAKMP crypto keepalive 10
!
life crypto ipsec security association seconds 28800
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac xxtransform
!
xxmap 10 ipsec-isakmp crypto map
defined peer xxxx
Set transform-set xxtransform
PFS group2 Set
match the address tunnelnetworks
reverse-road remote-peer
!
!
!
!
interface Loopback0
172.16.99.2 the IP 255.255.255.255
!
interface FastEthernet0/0
Description Connection to Internet (DHCP)
DHCP IP address
IP access-group outside_in in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the firewall on IP
automatic duplex
automatic speed
No cdp enable
xxmap card crypto
!
interface Serial0/0
no ip address
Shutdown
No cdp enable
!
interface FastEthernet0/1
Description of the connection to the local network
IP 172.20.2.1 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
automatic duplex
automatic speed
No cdp enable
VPN service-policy input
!
interface Serial0/1
no ip address
Shutdown
No cdp enable
!
IP nat inside source list nat - acl interface FastEthernet0/0 overload
no ip address of the http server
local IP http authentication
no ip http secure server
IP classless
IP route 0.0.0.0 0.0.0.0 dhcp
!
!
!
IP nat - acl extended access list
refuse any 10.0.0.0 0.255.255.255 ip
allow an ip
outside_in extended IP access list
allow udp any eq bootps host 255.255.255.255 eq bootpc
allow an ip host (ASA IPADDR)
deny ip any any newspaper
IP extended access list police
deny ip host xxxx any
deny ip any host xxxx
IP 172.20.2.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
tunnelnetworks extended IP access list
permit host 172.16.99.2 ip 10.0.0.0 0.255.255.255
IP 172.20.2.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
recording of debug trap
logging source-interface Loopback0
exploitation forest xxxx
not run cdp
!
!
!
!
!
Banner motd ^ CCCAuthorized technician!
^ C
!
Line con 0
line to 0
line vty 0 4
exec-timeout 5 0
Synchronous recording
entry ssh transport
line vty 5 15
exec-timeout 5 0
Synchronous recording
entry ssh transport
!
!
endPlease check if this helps:
http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t8/feature/guide/gt_crpks.html
Federico.
-
Having a problem in Windows 7 when using Skype
Hello world
My name is Steven Lash, I lived in San Diego in the United States. I have been using Windows 7 for the past 6 years, all software and applications work properly except Skype, for these 2-3 weeks, I was faced with problem on my Skype. I don't understand what is the real problem. I did my best to solve this problem, as I've uninstalled Skype and update it to the latest version, but still the problem is the same. Now, I'm going to share exactly the problem I used, while I started my laptop Skype has successfully loaded whenever I was answering to anyone to contact on Skype, it displays the message do not answer and the circle is the continuous treatment and here I got the error on my Skype screen. http://prntscr.com/beleyg, please check any suggestions really appreciated.
Steven Lash
Hi Steven,
Sorry for the inconvenience caused.
If please go to http://support.microsoft.com/and click the Skype link. We have a dedicated team to help you with problems with Skype.
I hope this helps.
-
Hello
I have an application that processes data from bluetooth and send it to the web service. Recently, there was a request to add sounds to the request. Now when the application processes lots of data and the player plays constantly after a few seconds I get exception "Application is not responding. And then the treatment is finished. In the newspapers, I see many connected after this exception ForcedStackTrace exception.
The sounds are played in the separate thread. If the app is not play sounds or short sounds - everything works fine. Is it possible to avoid what happens an exception? Why this is happening?
Thanks in advance,
Viktor.
Solved by implementing my own PlayerManager, which running in a separate thread would point the way to the queue rather then the number of threads by using the internal player application.
-
my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?
My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.
-
How do I pair for windows 10 laptop via bluetooth with the iphone 6
How do I pair 6 + for windows 10 laptop via bluetooth with the iphone?
You do not have. This isn't a feature of iOS. It has never been.
-
This is a double post of a following:
-
I have Windows 8 and you are unable to open a session. I have reset my password online successfully, but the new password does not work. The message says: "your computer is offline. Please sign in with the last password used on this computer. "I don't remember last password that I used. Any ideas?
Original titile: password is not working on Windows 8
People it is a very simple and easy solution to this problem! Once you have reset your password from another PC/laptop or any other server for windows 8, you go back to your PC / laptop original where you forgot your password and do the following...
1. even if you have reset your password, make sure you have an internet connection for this laptop can be wired or WIFI Hotspot even
2. make sure that connect you using the option under your network settings in the lower left corner of your logg in screen.
3. Once you are connected then only can type you the new password that you changed.
NOW, the simple reason for this is that when you have conveniently forgotten your logg in detail on this pc it does not recognize your new password unless it is connected to your online account.
-
I use W8 for months and all of a sudden, while traveling, I can't connect to my computer. I get the error "your PC is offline.". Please sign in with the last password used on this computer. "I am sure that I use the password. I have a flash drive and another laptop (Running OS X) at my disposal. What should I do to access my laptop?I don't have access to my local network, or any network besides.I have not recently changed password. I can't restore or refresh because it requires the password and says that isn't true. I never installed webroot or anything of that kind.Results in the same number safe mode.I can't connect to my Live account with my phone just fine.I do not have a local account.It's ridiculous and absurd oblivion by Microsoft. I'll be away a network known for a week and have literally no access to my computer. I would like to take this opportunity to warn all users of Windows 8 to make sure that they USE LOCAL ACCOUNTS. DO NOT USE DIRECT REPRESENTS WINDOWS 8, BECAUSE IF THIS HAPPENS TO YOU AND YOU CANNOT CONNECT TO A WELL-KNOWN. NETWORK, YOU WILL BE LOCKED.I am aware that there are discussions on this topic, but I want to throw oil on the fire, so to speak, because as far as I know, there is no solution.
* EDIT *.
The only solution is to connect to a known network. If you are not able to connect to a known network, you can not connect, simple as that. It's a big bug for sure. I repeat, change your account to a local account to avoid this problem.So I solved this problem, but unfortunately, it was as bad as I thought. As I thought, you need to connect to a network "Known", and then try to connect. It should work. If you are not near a network known (as if I was), as far as I know, there is no solution. To avoid this, change your account to a "Local" account
My theory for the problem is the following:
When you connect using a Live account, the password is saved locally and on the network. If you are connected to a network, it verifies the password that you enter the password stored on the network. If they match, it will allow one, sign in. If you are disconnected from the network, Windows attempts to match the password online, realizes he cannot, then checks the local password. Somehow, in my case, the password locally must have been changed or deleted and so the password entered always was "Incorrect."
So yes, big problem, I'm sure the solution is quite simple, but in the meantime, use a local account to prevent this. I was stranded, and it was a huge headache and cost me many hours of work. -
I'm so angry. I did everything and I can't connect my new pc Windows 8! I live in New Jersey and set up my network connection there, but I'm going to school in California (where I don't had not set up a connection without wire/local). I have configured my pc via a microsoft account and now it does not allow me to log in because I am not connected to the internet and can not connect to the internet. I can not update/use command prompt to connect to the wifi/etc. because all actions require my password. I even tried to use an Ethernet cable. Nothing works! He always says "your PC is offline.". Please sign in with the last password used on this computer. "I HAVE NOT CHANGED MY PASSWORD! and my account has not been hacked. This problem is simply my inability to connect to the internet. It's BS. Microsoft, you better come up with a fix for this young! If anyone has found a solution to this problem, please answer! I have very important files/software that I can't simply delete. This bug is much too big for Microsoft to miss and should be fixed immediately. How am I supposed to use this PC for school?
But... In order to implement a local account, you must first connect to the Microsoft account that brings back us to the same error. I had this problem as well and he needs to be addressed. Whenever you walk away a network before installation on your PC/laptop, you will have this problem. Try this... turn off PC/laptop, then go to another computer and sign in to Microsoft Web site account. Connect with an Ethernet cable and turn on your PC/laptop with the connection problem and try to connect again. It should work.
-
Original title: Unable to connect
Ok. So I'm having a few problems to connect to my computer windows laptop 8. I have reset my password like 5 times, restarted my computer over the same period of time, and I can not even sign. When I try to sign, it says: "your computer is offline. Please sign in with the last password used on this computer. "Well, I don't know what was the last password. I'm sure that the last time I registered on my laptop, I used the PIN that I used to have for her. The only reason why I changed it was because I wanted it to be more difficult to get into my PC. But I wanted more difficult for other people, not more difficult for me. Can someone help me with this please?
Hi Arianna,.
Thanks for posting your query on the Microsoft Community.
I understand the inconvenience caused to you. I'll be happy to help you with your problem.
I suggest you refer to the suggestion given in the thread and check out them below if it can help solve your problem:
Let us know the status of the issue. We will be happy to help you further.
Thank you.
-
Original title: pavilion hp touch smart 15
whenever I have try & open a session on my HP pavilion TouchSmart 15 PC laptop it says "your PC is offline.". Please sign in with the last password used on this PC "so I did. and it did not work. It's very frustrating because I have school work, which must be complete! Help, please!
Hello
Usually this problem is caused if there any changes in the configuration of the keyboard, or due to Internet connection issues. I would like to know some information about this problem, so that we can help you further.
1. do you have the question started recently?
2. have you recently changed the password?
3. have you made changes on the computer before this problem?
I suggest you to make sure that the caps lock is not activated, if it is enabled, then turn it off and check if that helps.
If you are still not able to connect to your account using the password, then I suggest you to check the steps mentioned by Cliff_N on December 7, last here:
Please respond with more information on this issue, so that we can better help you. -
OT: locked out of my laptop.
Hello, I have an Asus with Windows 8, and last night my friend locked me out of my laptop by pressing on enter far too often. Now I can not connect on my laptop. Whenever I get my password it says "your PC is offline.". Please sign in with the last password used on this PC"and I really need to get inside because I have a great duty that I have to finish and return. I really need help.
Hello Tiana,
Thanks for posting your query in Microsoft Community Forum.
Of course, I understand the feeling of being locked out of computer especially when you have something important lined up.
In this scenario, you perform Refresh if you have Windows 8 DVD with you.
How to refresh, reset or restore your PC
Warning: Apps that you have installed Web sites and DVD will be removed. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.
In case you don't have a disc, you can contact Asus that can help reset the computer to factory settings.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Thank you.
-
Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?
I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?
MacBook Pro (2015 retina) OS X 10.11.2 El Capitan
Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?
If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB. You can post there to see if anyone has the answers.
-
Your PC is in offline mode. Please sign in with the last password used on this PC.
Hello!
I have an ASUS Tablet PC with Windows 8, and I can't connect. The message: "your computer is offline. Please sign in with the last password used on this computer. "I've tried everything. EVERYTHING. And nothing works. I changed the password, managed to connect to the internet, but still. The same message over and over again. I'm so frustrated!
I really need help, please.
Hello, Andreea,
Thanks for posting your question on the Microsoft community.
Thank you for details on the issue.
This problem can occur either if the computer is not correctly connected to the Internet or corrupt the account settings.
Please see suggestions from Alex Zhao and marked as answer Michael_Martin, on 31 July 2014 moderator and check.
https://social.technet.Microsoft.com/forums/SQLServer/en-us/a0e6655d-8642-41a4-819e-18d24885f9cf/your-PC-is-offline-please-sign-in-with-the-last-password-used-on-this-PC?Forum=w8itprosecuritySee also suggestions of LCRT replied on May 4, 2013.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/your-PC-is-offline-please-sign-in-with-the-last/7c33c007-a2a5-4FDC-a0fe-c9c96bdebb1aI hope this information helps.
Please let us know if you need more help.
Thank you
Maybe you are looking for
-
Error in PC Express on Qosmio G40
Hello I've owned my Qosmio again for 2 years. Its a Qosmio G40 and it worked very well. Recently, I updated to Windows 7Monday/Tuesday night, I had one of these standard windows updates that settle after clicking stopNext morning, I turned on and get
-
I would like to be able to scan documents to email Gmail, AOL accounts, etc., directly. Is this possible with this printer? I don't want to scan to another thing. If this isn't the case, I will return it. This feature is very important to me. Also, i
-
On labview 8.6 &; 8.2 problem
My computer installed 8.2 file exe, which is built by the labview 8.2. Now, I install the exe 8.6 to the same computer, which is built by the labview 8.6. So, all my files 8.2 exe cannot run. I want to execute the exe 8.2, what can I do? I think addi
-
hp scanjet G2710 ER gjort med success straffesaker MVH Hans
-
BlackBerry 10 can not send emails to someone, not in the contacts list
Brand new here and searched this forum and elsewhere for this problem, but the gaps came. I got my Z10 launch day at the Canada and he likes most of the time. Most of the questions I had were actually lack of Telus. (Implemented my Telus email accoun