Laptop Hard Drive 3.5 SATA hard disk (please fast response)

Similar Questions

• HP 15 laptop: hard disk failure

  Hello. IM in a State of panic. I need my computer to school ifx. I went to market and all that it does to blue screens and says the smart player is a failure. Then when I do the test drive DART he gives me this number

  HARD DRIVE 1: failure

  FAILURE ID: QCQBHF-7B77LL-XD7V6K-60AGO3

  Im stuck. I did everything and it does not start. He'll just go to the blue screen and if I do something it turns off. Please help someone.

  Hello

  Unfortunately to say: most of the time the 24 tank failure id indicates the drive is defective and must be replaced. It is still under warranry? In the affirmative, please call HP for a replacement.

  In the United States:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://welcome.HP.com/country/W1/en/contact_us.html
  
  Kind regards.

• internal hard disk not found, to solve this problem try reinstalling the drive... Help, please

  I have a Dell Inspiron 1440 use for 2010 all of a sudden, I saw this error message 'drive hard internal found to solve this problem try to reinstall the drive' when I turned it on. Then I tested with other other laptop HARD disk drive and it starts fine. Then realized that the HARD drive was taken, at the bottom, a new samsung SSD 120 GB drive and installed on my laptop and try to install Windows 7 from a CD see always the same error when turned on.

  Please help with this question.

  Thanks in advance

  ROHIT

  Thank you guys!

  My bad after I installed the drive SSD the CD that was in the DVD player was the CD for Applications/drivers instead of Windows 7 disc. I just realized and installed Win7 on my new hard drive, my laptop is back to normal. Thank God! I saved 500 to get the new laptop.

• HP Pavilion DV6 6053ea - SSD SATA III HARD disk? & HARD drive space gone?

  Hello

  I have a HP Pavilion DV6 6053ea. It works fairly well, but I think I have an SSD would really speed up the loading of programs and start etc. I'm not so sure that the upgrade. I read on a thread if I had Port SATA 1 6 Gbps Supported or SATA Port 0 6 Gbps then my cell phone was good for SATA III. Is this the case? Joined a program hwinfo32 image, can you check if my phone would support SATA III?

  

  The other issue is my HD. My laptop says I have 750GB HD coming to about 700 GB after formatting. But my laptop seems to have only a total of 350 GB with all sectors added together. Where is the space?

  

  Hello

  Yes, your laptop has 2 ports SATA 6 GB/s (SATA III) most likely the hard drive and an optical drive are connected on it. There are also 2 SATA 3Gbps ports but not in use, I guess.

  The other issue is that there are 4 partitions but the partition 0 is strange and shouldn't be there. There should be a small boot for Windows partition (for BitLocker etc.), drive C: with Windows, D: drive with a partition recovery and partition Tools HP QuickWeb and some diagnostic utilities. It seems that the recovery partition is missing, the C: drive has been decreased and then created a small partition at the beginning of the hard disk. Take a look at disk management in administrative tools in the control panel this partitioning is on the hard drive.

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• How to replace a laptop HARD drive and restore the backup without a Vista startup disk?

  Hello
   
  I need to replace the drive HARD internal of my laptop and have a picture of it, created using the backup feature in Vista, on an external USB HDD. However, I've upgraded to Vista XP via a download online and don't have a Vista disc.

  How can I create a Vista startup disk that will give access to the backup/restore function, which allowed me to restore my backup to the new HARD disk image once I did the replacement? And is there anything else I forget?

  Thanks in advance!

  Mike

  You can borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is General info how to make a Vista startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How will I know if my inspiron 1721 laptop has a SSD or HARD disk drive?

  How will I know if my inspiron 1721 laptop has a SSD or HARD disk drive?

  Original title: HDDorSSD

  Greg

  Go to support.dell.com and enter your express number and they will tell you.

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• HP Pavilion a6667c: HP Pavilion a6667c, install the HARD drive to the SATA port

  My question is: is it OK to install a hard drive extra (in this case, my old laptop drive) in one of spare SATA ports on the motherboard? My first two is taken over by my first hard disk and the optical stock.

  You can add the disk as a data disk. This tray will work. Data cable  

  The power supply should have additional Sata power lead.

• HP beats 15 laptop: computer drive HARD failure diagnosis

  Hi people,

  I'm a little angry, I hope one of you lovely people can help me with some advice. My wife tried using the contact HP online support face today, but did not get a useful answer. The laptop in question has still 2 months warranty on this subject and I would like this issue to be fixed before the expiration of the warranty.

  The problem:

  A month or two ago my wife said that the laptop occasionally runs slowly or freezes at random times, then started working again without problem. I'm on the laptop, run scans antivirus, temporary files clear and others with CCleaner, uninstall unnecessary programs and then turn off most of the autobooting services and programs with msconfig. Nothing really came from him, but he did and apparently not having problems while I used it.

  A week later, more complaints that the laptop was running slower than optimal, with another request to examine it. This time he did freeze while I use it, so I run ladies sfc diagnostics and memory, which came to own. Then it was time to try to run through the optimization of windows to speed it up a little.

  Has held a few weeks for me since then, always heard there are problems, but not having is not the opportunity to study.

  Last night I finally get around to running the diagnostics of HP at the start and check out the source (I hope!) of the problem. Hard disk check is coming up with an error indicating that the disk is not healthy, technical Department should be contacted directly. I saved the newspapers to a USB port, I'll post the results in the next post.

  The solution:

  Could I please have some advice on the best way to proceed on this matter now? I'd appreciate any help.

  Kind regards

  Jason

  2015-12-03 22:07:55 =.
  2015-12-03 22:07:55 5.9.0.0 EFI diagnostic system has started
  2015-12-03 22:07:55 load white Options
  2015-12-03 22:07:55 acquired SysDiagsBiosData2011 Configuration variable
  2015-12-03 22:07:55 HP thermal diagnosis Protocol not available
  2015-12-03 22:07:55 ID system: 22A 8
  2015-12-03 22:07:55 BIOS HP Image Interface Protocol Version 2.0
  2015-12-03 22:07:55 found 4 4 active processors, Max 4 processors
  2015-12-03 22:07:55 found 1 absolute pointer or protocols
  2015-12-03 22:07:55 0 found UART peripheral path node.
  2015-12-03 22:07:55 found touchscreen device
  2015-12-03 22:07:55 system family: = 2
  2015-12-03 22:07:55 PlatformLang reported as en-US.
  2015-12-03 22:07:55 selected language is currently (eng).
  2015-12-03 22:08:07 Player library initialization.
  2015-12-03 22:08:07 TscPerSecond = 065238C98h
  2015-12-03 22:08:07 installed protocol commands ATA DTDS
  2015-12-03 22:08:07 Found installed DTD ATA commands protocol supporting Packet orders!
  2015-12-03 22:08:07 found 1 hard drive.
  2015-12-03 22:08:07 drive CHIP 0 supported
  2015-12-03 22:08:07 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B137298) to drive 0
  2015-12-03 22:08:07 found 1 optical disc.
  2015-12-03 22:08:07 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B108C18) to drive 1
  2015-12-03 22:08:07 ATA Total 2 records found
  2015-12-03 22:08:07 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2015-12-03 22:08:07 no handle found support EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:08:07 no handle found support LEGACY_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:08:07 1 hard drive Total records found
  2015-12-03 22:08:07 1 total optical disk drives found
  2015-12-03 22:08:07 found 1 hard drives
  2015-12-03 22:08:07 found 1 optical discs
  2015-12-03 22:08:07 ID system: 22A 8
  2015-12-03 22:08:07 system model: = HP Beats 15 Notebook PC
  2015-12-03 22:08:07 system SKU: = K1S17EA #ABU
  2015-12-03 22:08:07 ID system: 22A 8
  2015-12-03 22:08:07 11 Type operating system image:
  2015-12-03 22:08:07 HARD drive 0 model: HGST HTS541010A9E680
  2015-12-03 22:08:07 0 Serial HARD drive: JA100A1F3B5JNM
  2015-12-03 22:08:07 0 ODD model: hp DVD - RW GUB0N
  2015-12-03 22:08:07 STRANGE series 0: M7FEB420920
  2015-12-03 22:08:07 DIMM 0 serial number: 000013A 4
  2015-12-03 22:08:07 DIMM 0 Part Number: AM1L16BC8R2-B1QS
  2015-12-03 22:08:07 BIOS revision: F.43
  2015-12-03 22:08:07 platform Vendor ID: 0 x 1022
  2015-12-03 22:08:07 Platform Device ID: 0 x 1400
  2015-12-03 22:08:07 only a single MEMORY bar (Index 1) is filled on the system
  2015-12-03 22:08:07 found EFI_HP_DIMM_ID_PROTOCOL
  2015-12-03 22:08:07 InitializeCeeLogs - no record found
  2015-12-03 22:08:07 BattInit: Protocol 2010.
  2015-12-03 22:08:07 start graphics system Menu diagnosis
  2015-12-03 22:08:37 quick test of the chosen system
  2015-12-03 22:08:37 calculation time to Test memory
  2015-12-03 22:08:37 total 7399 MB of memory, Free 7285 MB (1865128 Pages)
  2015-12-03 22:08:37 parm buffer allocation
  2015-12-03 22:08:37 case of test Init
  2015-12-03 22:08:37 calculated 0x000000001B9FDAC6 TSC ticks per MB
  2015-12-03 22:08:37 estimated duration total = 2181 s
  2015-12-03 22:08:37 battery test started
  2015-12-03 22:08:37 SmartAdapter: Protocol not available.
  2015-12-03 22:08:37 number of batteries 1
  2015-12-03 22:08:38 BattResetCharger: No.0 (success).
  2015-12-03 22:08:38 BattResetCharger: n ° 1 (success).
  2015-12-03 22:08:41 battery 0 returned 0 x 0000000000000001
  2015-12-03 22:08:42 battery result = 1
  2015-12-03 22:08:42 CPU test started
  2015-12-03 22:08:42 UDM Cpu start test.
  2015-12-03 22:08:42 features BIOS 0x003000093F899880
  2015-12-03 22:08:42 ID system: 22A 8
  2015-12-03 22:08:42 ===========================================================
  2015-12-03 22:08:42 starting CpuDiags.udm version 1.03 built 14 September 2015 10:24:13
  2015-12-03 22:08:42 CpuDiags.UDM full init
  2015-12-03 22:08:49 test complete CPU - result 1
  2015-12-03 22:08:49 Wireless Module check started
  2015-12-03 22:08:49 Wireless Module audit completed - results 1
  2015-12-03 22:08:49 test Board full system - result 1
  2015-12-03 22:08:49 SMART Check started
  2015-12-03 22:08:49 SMART audit end - result 1
  2015-12-03 22:08:49 short DST has begun
  2015-12-03 22:08:53 memory quick check started
  2015-12-03 22:09:02 hard drive DST Code 0: 7
  2015-12-03 22:09:03 hard Drive 0 DST Description: the previous self-test completed having the read element of the test failed
  2015-12-03 22:09:03 tested 20 MB in 10000 ms with 4 processors, the duration of the standardized test is 2000 ms/MB
  2015-12-03 22:09:03 test memory used 5241 Pages
  2015-12-03 22:09:03 check fast memory completed - results 2
  2015-12-03 22:09:03 code DST hard drive 0: 7
  2015-12-03 22:09:03 hard Drive 0 DST Description: the previous self-test completed having the read element of the test failed
  2015-12-03 22:09:03 short completed DST - score 3
  2015-12-03 22:09:03 error code = 0 x 303
  2015-12-03 22:09:03 serial number: 5CD4493T5J
  2015-12-03 22:09:03 guaranteed Start Date: 25/02/2015
  2015-12-03 22:09:03 WarrantyIDString size = 60
  2015-12-03 22:09:03 guaranteed ID = UBV6LF-7HQ7SB-MFPV6K - 60 X 103
  2015-12-03 22:09:03 short completed DST - score 3
  2015-12-03 22:09:03 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:03 0 0 17 0
  2015-12-03 22:09:03 0 0 20 1
  2015-12-03 22:09:03 paired FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:09:43 quick test of the complete system
  2015-12-03 22:09:46 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:46 0 0 17 0
  2015-12-03 22:09:46 0 0 20 1
  2015-12-03 22:09:46 paired FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:09:51 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:51 0 0 17 0
  2015-12-03 22:09:51 0 0 20 1
  2015-12-03 22:09:51 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:09:58 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:09:58 0 0 17 0
  2015-12-03 22:09:58 0 0 20 1
  2015-12-03 22:09:58 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:11 way to unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:10:11 0 0 17 0
  2015-12-03 22:10:11 0 0 20 1
  2015-12-03 22:10:11 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:22 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:10:22 0 0 17 0
  2015-12-03 22:10:22 0 0 20 1
  2015-12-03 22:10:22 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:31 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:10:31 0 0 17 0
  2015-12-03 22:10:31 0 0 20 1
  2015-12-03 22:10:31 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:10:36 Road Management of BIOS HP EFI
  2015-12-03 22:10:42 uninstall DTD ATA commands of Protocol
  2015-12-03 22:10:42 out of System Diagnostics
  2015-12-03 22:19:19 =.
  2015-12-03 22:19:19 5.9.0.0 EFI diagnostic system has started
  2015-12-03 22:19:19 load white Options
  2015-12-03 22:19:19 acquired SysDiagsBiosData2011 Configuration variable
  2015-12-03 22:19:19 HP thermal Diagnostic Protocol is not available
  2015-12-03 22:19:19 system ID: 22A 8
  2015-12-03 22:19:19 BIOS HP Image Interface Protocol Version 2.0
  2015-12-03 22:19:19 found 4 4 active processors, Max 4 processors
  2015-12-03 22:19:19 found 1 absolute pointer or protocols
  2015-12-03 22:19:19 0 found UART peripheral path node.
  2015-12-03 22:19:19 found touchscreen device
  2015-12-03 22:19:19 system family: = 2
  2015-12-03 22:19:19 selected language is currently (eng).
  2015-12-03 22:19:21 Player library initialization.
  2015-12-03 22:19:21 TscPerSecond = 065239E32h
  2015-12-03 22:19:21 installed protocol commands ATA DTDS
  2015-12-03 22:19:21 found installed DTD ATA commands protocol supporting Packet orders!
  2015-12-03 22:19:21 found 1 hard drive.
  2015-12-03 22:19:21 drive CHIP 0 supported
  2015-12-03 22:19:21 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B137298) to drive 0
  2015-12-03 22:19:21 found 1 optical disc.
  2015-12-03 22:19:21 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B108C18) to drive 1
  2015-12-03 22:19:21 2 ATA Total records found
  2015-12-03 22:19:21 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2015-12-03 22:19:21 no handle found support EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:19:21 no handle found support LEGACY_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:19:21 1 hard drive Total records found
  2015-12-03 22:19:21 1 total optical disk drives found
  2015-12-03 22:19:21 found 1 hard drives
  2015-12-03 22:19:21 found 1 optical discs
  2015-12-03 22:19:21 ID system: 22A 8
  2015-12-03 22:19:21 system model: = HP Beats 15 Notebook PC
  2015-12-03 22:19:21 system SKU: = K1S17EA #ABU
  2015-12-03 22:19:21 ID system: 22A 8
  2015-12-03 22:19:21 11 Type operating system image:
  2015-12-03 22:19:21 0 model HDD: HGST HTS541010A9E680
  2015-12-03 22:19:21 0 Serial HDD: JA100A1F3B5JNM
  2015-12-03 22:19:21 ODD 0 model: hp DVD - RW GUB0N
  2015-12-03 22:19:21 STRANGE series 0: M7FEB420920
  2015-12-03 22:19:21 DIMM 0 serial number: 000013A 4
  2015-12-03 22:19:21 DIMM 0 Part Number: AM1L16BC8R2-B1QS
  2015-12-03 22:19:21 BIOS revision: F.43
  2015-12-03 22:19:21 platform Vendor ID: 0 x 1022
  2015-12-03 22:19:21 Platform Device ID: 0 x 1400
  2015-12-03 22:19:21 only a single MEMORY bar (Index 1) is filled on the system
  2015-12-03 22:19:21 found EFI_HP_DIMM_ID_PROTOCOL
  2015-12-03 22:19:21 BattInit: Protocol 2010.
  2015-12-03 22:19:21 from Menu of Diagnostic graphics system
  2015-12-03 22:19:26 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:19:26 0 0 17 0
  2015-12-03 22:19:26 0 0 20 1
  2015-12-03 22:19:26 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:19:32 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:19:32 0 0 17 0
  2015-12-03 22:19:32 0 0 20 1
  2015-12-03 22:19:32 set match FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:19:34 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:19:34 0 0 17 0
  2015-12-03 22:19:34 0 0 20 1
  2015-12-03 22:19:34 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:20:14 way to unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:20:14 0 0 17 0
  2015-12-03 22:20:14 0 0 20 1
  2015-12-03 22:20:14 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:20:20 uninstall DTD ATA commands of Protocol
  2015-12-03 22:20:20 out of System Diagnostics
  2015-12-03 22:24:13 =.
  2015-12-03 22:24:13 5.9.0.0 EFI diagnostic system has started
  2015-12-03 22:24:13 load white Options
  2015-12-03 22:24:13 acquired SysDiagsBiosData2011 Configuration variable
  2015-12-03 22:24:13 HP thermal diagnosis Protocol not available
  2015-12-03 22:24:13 system ID: 22A 8
  2015-12-03 22:24:13 BIOS HP Image Interface Protocol Version 2.0
  2015-12-03 22:24:13 found 4 4 active processors, Max 4 processors
  2015-12-03 22:24:13 found 1 absolute pointer or protocols
  2015-12-03 22:24:14 0 found UART peripheral path node.
  2015-12-03 22:24:14 found touchscreen device
  2015-12-03 22:24:14 system family: = 2
  2015-12-03 22:24:14 selected language is currently (eng).
  2015-12-03 22:24:16 Player library initialization.
  2015-12-03 22:24:16 TscPerSecond = 065239F87h
  2015-12-03 22:24:16 installed protocol commands ATA DTDS
  2015-12-03 22:24:16 found installed DTD ATA commands protocol supporting Packet orders!
  2015-12-03 22:24:16 found 1 hard drive.
  2015-12-03 22:24:16 drive CHIP 0 supported
  2015-12-03 22:24:16 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B137298) to drive 0
  2015-12-03 22:24:16 found 1 optical disc.
  2015-12-03 22:24:16 AtaCommandsBindBlockIoProtocol(): link block of e/s Protocol (0x9B108C18) to drive 1
  2015-12-03 22:24:16 ATA Total 2 records found
  2015-12-03 22:24:16 no handle found support EFI_EXT_SCSI_PASS_THRU_PROTOCOL (143B7632-B81B-4CB7-ABD3-B625A5B9BFFE).
  2015-12-03 22:24:16 no handle found support EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:24:16 no handle found support LEGACY_NVM_EXPRESS_PASS_THRU_PROTOCOL_GUID (EC51EF5C-2CF3-4A55-BF85-B63CA3B13F44).
  2015-12-03 22:24:16 1 hard drive Total records found
  2015-12-03 22:24:16 1 total optical disk drives found
  2015-12-03 22:24:16 found 1 hard drives
  2015-12-03 22:24:16 found 1 optical discs
  2015-12-03 22:24:16 ID system: 22A 8
  2015-12-03 22:24:16 system model: = HP Beats 15 Notebook PC
  2015-12-03 22:24:16 system SKU: = K1S17EA #ABU
  2015-12-03 22:24:16 ID system: 22A 8
  2015-12-03 22:24:16 11 Type operating system image:
  2015-12-03 22:24:16 0 model HDD: HGST HTS541010A9E680
  2015-12-03 22:24:16 HDD 0 Serial: JA100A1F3B5JNM
  2015-12-03 22:24:16 ODD 0 model: hp DVD - RW GUB0N
  2015-12-03 22:24:16 series 0 ODD: M7FEB420920
  2015-12-03 22:24:16 DIMM 0 serial number: 000013A 4
  2015-12-03 22:24:16 DIMM 0 Part Number: AM1L16BC8R2-B1QS
  2015-12-03 22:24:16 BIOS revision: F.43
  2015-12-03 22:24:16 platform Vendor ID: 0 x 1022
  2015-12-03 22:24:16 platform Device ID: 0 x 1400
  2015-12-03 22:24:16 only a single MEMORY bar (Index 1) is filled on the system
  2015-12-03 22:24:16 found EFI_HP_DIMM_ID_PROTOCOL
  2015-12-03 22:24:16 BattInit: Protocol 2010.
  2015-12-03 22:24:16 from Menu of Diagnostic graphics system
  2015-12-03 22:24:19 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:24:19 0 0 17 0
  2015-12-03 22:24:19 0 0 20 1
  2015-12-03 22:24:19 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0
  2015-12-03 22:24:42 path of unity: PciRoot(0x0) /Pci(0x11,0x0) /Sata (0 x 0, 0xFFFF, 0x0)
  2015-12-03 22:24:43 0 0 17 0
  2015-12-03 22:24:43 0 0 20 1
  2015-12-03 22:24:43 matched FailingBus = 0, FailingDev = 17, FailingFunc = 0

  Hi Jason,

  The hard drive is indeed a failure and needs to be replaced - just contact HP and make arrangements for this under warranty.

  The section of the report you cite is UBV6LF-7HQ7SB-MFPV6K-60 X 103 because this will confirm the diagnostic failure with software HPs.

  If you live in the United Kingdom, contact HP here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Compatible Dell Inspiron 1545 laptop hard drives

  My sister in law's laptop computer is an Inspiron 1545. This is the default size of the hard drive is 160 GB. I assume that it is a SATA. She got this as a Christmas present 3 years ago. What hard drives are compatible for this laptop?

  Hi Dennis3232,

  Inspiron 1545 comes with a configuration of disks 5400 RPM and the maximum hard that was shipped with this computer was 500 GB. Hard drive capacities are as follows:

  1. 80 GB AT 5400 RPM
  2. 160 GB AT 5400 RPM
  3. 250 GB-5400 RPM
  4. 320 GB-5400 RPM
  5. 500 GB-5400 RPM

  Please click here for compatible hard drives in this computer.

  The connector is SATA.

  Please consult the following link for re - install the hard drive: http://bit.ly/QumKWn

  For any information feel free to contact me.

• How to change Pavilion DV2000 hard drive? What brand/size of the hard disk works?

  I have a Pavilion dv2000 I bought in 2006 (waaay out of warranty).

  My current (original) hard drive is completely filled. It is 80 GB. Fujitsu SATA

  I tried to upgrade the hard drive me. I bought a Western Digital SATA 250 GB hard drive is cloning kit.
  The kit seemed to do what he was supposed to, but when it was time to put the new drive in, I ran into problems.

  Do not match the connectors on the ends upwards. Metal "teeth - like ' connector end face on the new hard drive instead of to the bottom." (I couldn't find another way to navigate the hard drive cradle to get the connectors to face down so that they connect with the rest of the computer.

  Predictable when I tried to boot up the laptop, it wouldn't read the new hard drive. So I put the old hard drive in and that's what I use now as I type.
  The old hard drive did not fit into the cloning kit which makes me think that this hard drive configuration is obsolete and this laptop can not be upgraded at all, which sucks considering how much $$$ I've spent on this equiptment upgrade...

  I can't find info on internal hard disk of purchases on the HP website. Anyone know what new hard drive will work in this old laptop?

  Thank you for helping!

  I found the answer. It turns out that my computer is so old that about a year after I bought it, HP changed the configuration of HDD on their laptops all line of Pavilion in the future. The HD config in my laptop is now part of a line that was interrupted for more than 2 years. This old line goes only up to into space at 120 GB if you can find an old still sold online. Retailers do not sell them more.

  And I can't use the clone HD product that I bought since my hard drive is obsolete and does not.

  So I'm pretty much stuck with what I have now. It's not worth the hassle. I'm going to do with this for a year (with an external hard drive), and then get a new machine.

  Please help guys!

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Satellite L50-A-19N - HARD disk controller is not compatible SATA 3

  Hello.

  I have a model of L50-a-19n satellite.
  The hard drive it is HGST Travelstar 5 K 1000 750 GB, SATA 6 Gbps (HTS541075A9E680/0J22412).

  On Web site of the manufacturer and as Aida64 diagnostic software the hard drive is named SATA-III 600 MB/s.

  But when I run the Crystaldiskinfo software or simillar, it is said that the taken and current transfer mode supported SATA/300.
  Why is it like that?

  Is this some sort of software limmitation?
  In the Bios, I turned on the performance mode.

  HARD drive supports SATA 6 Gbit/s, but the portable controller is probably limited to SATA II (3 Gb/s)

  If the HARD disk controller does not support SATA III, HARD drive performance will be limited.

• HP Envy dv6 7247 cl: what is the cable that connects my laptop HARD drive?

  There is a small cable about an inch of that long, it connects a SATA 300 HD to something else, I can't not recognize inside my laptop, my hard drive is dead and along my warranty gone, is it possible to replace the snack cable replace my HARD drive does not work?
  
  Here's a Visual.
  
  Thank you.

  Hello andrew8blue,

  Welcome to the HP Forums!

  I saw your picture and read your thread. The cable is not a replaceable part. You might have to replace the whole motherboard if the HARD drive does not work.

  Please let me know if you have any other questions. Thank you!

  Mario