LAPTOP HP 15: BUTTON (F12) WIRELESS LED LIGHTS AMBER COLOR AFTER STOP OF THE LAPTOP

Similar Questions

• Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash

  I have a Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash. I need help...

  The brother of contact support.

• Brand new AspireSwitch10 power not on. No LED light. He once worked in the wall outlet. Any difficulty?

  Unpacked new device plugged into the wall during the night to recharge, but unable to see the light as notes Quick Guide to LED. While it is plugged into the wall, I was able to run the installation program and start downloading Office 365. Don't know if this one ends as the screen went black. Cannot restart. Does anyone know how to revive a dead device? If there is no suggestion, I'll try to replace the power cord.

  Try a long press of the key power + volume down, it will get into the bios, press F10, save and exit. then it will restart Windows.

  Furthermore, no during charging led light isn't a good thing, don't forget that you have completely plugged taking it works 10.

• DV7-lights remain on after stopping

  I have a problem with laptop DV7 - 3164CL s.  Everything works perfectly EXCEPT when I stopped, the machine stops (power led on front left goes and top off) but the mute led, the volume, the multimedia control slider of the duct and the stay of the adapter wireless led (orange now) all the lit.  There is no disk activity and, except for the led stays on, it would appear that the machine has stopped.

  I did a full system recovery, made all updates of HP driver, all the Windows updates, latest version of the bios installed.  The problem still manifests.  I'm now leaning towards a material defect problem or maybe a bad connector plugged in the led Panel?  Any suggestions would be greatly appreciated.

  Thank you, in advance.

  Bob R.

  This problem is no longer.  I had posted a thread separate here; but responding to a similar problem here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/HP-Pavilion-dv7-computer-keeps-shutting-down-by-itself/m-p/2406561/highlight/false#M33934

  It's the same problem, two positions.  Thanks for helping - I don't know what we would do without the forums and google.  Many problems are solved here.  It was surprising to see how few people know about this thing with the lights on after his stop.  Perhaps our conclusions and our messages will help someone else with this problem.

• S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

  I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

  UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

• How can I make the "abort" button show? (I can not click on 'stop' in the menu drop-down operations).

  I modified a model; It took me a while loop inside another while loop, which causes the "stop" button to the don't end not the functioning of the VI. I hooked the "stop" button at the same time of the icons stop loops while, but is not complete the VI, so I need to use the button 'give up', but it isn't here. How can I bring / what it does appear?

  Move the button "stop" inside the inner while loop.

  And just for the appropriate encoding methods, do not hide behind a loop code

  It makes debugging difficult.

  You must also move the button 'save' inside of the inside while loop as well.

• Satellite U400-22n - how to change the button mute for Led lighting

  Hello

  I can't turn off lighting on shortcut keys. The shortcut key to disable the LED has decided to change himself to put on mute. Does anyone know how I can pass this mute button to turn off the lights, or simply how can I turn off?

  Thanks in advance,

  Andy

  Hello

  If you are using Vista, then you should have installed VAP (value added package).
  In Toshiba Assist-> optimize you will find the configuration of buttons of Toshiba utility.
  This utility allows you to configure the buttons again.

  You must choose your button and should point to the dimmer.exe file that is located in the folder C:\Program Files\Toshiba\TBS

  Assign the dimmer.exe to the light button and complete the configuration. This should help.

• power adapter light turns off after plugging in the Inspiron notebook (5523)

  I have an Inspiron 5523, and it was working fine, until early today. I went to plug the thing to do, and it would not charge. Instead, the light on the power supply unit to the adapter stops, or would flicker. This happened with 2 load cables. I'm looking at a motherboard dead, or something else?

  Hello N108bg

  Please write to us.

  If the light on the adapter stops when it is connected to the machine, we look at a dead motherboard.

  Let us know if the system is under warranty, we will have repaired.

  Concerning

  Hema

• Light remains off after plugging in the power adapter.

  I recently bought a replacement battery for my Toshiba Satellite running Windows XP. I started the new charge battery and removed the computer AC adapter to make sure that the battery was functional. However, when I plug the AC adapter in, the backlight is out.  If I restart Windows, the backlight turns on, but if I disconnect/reconnect the AC adapter, the backlight is turned off again. So, the backlight works, but for some reason, she turns to disconnect the AC adapter.

  Hello Pmorawski,

  Thank you for your message.  It is a Toshiba hardware problem and your question would be better suited for Toshiba.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Portege M800: How to turn off the LED light of the multimedia and the touchpad?

  Hello

  I have Toshiba Portege M800.
  I want to know, how can I turn off the light of multimedia and the touchpad
  Thanks in advance

  Hello

  I m not M800 owner but I ve got an another Toshiba laptop and these LED lights I can turn market in the BIOS and in Toshiba HWSetup.
  The HWSetup is placed in Toshiba help optimize them and the settings are in the tab 'enlightenment '.

  See you soon

• HP 14-r206nv: light wireless led doesn't work do not

  I have a very minor issue that don't mind operating of the laptop, but I'm curious to know why it does not work, because I know that before reinstalling windows it worked normally.

  Well well, to the point now. After a hard drive failure and replacement, Windows 8.1 are installed again and each driver has been installed and works well. The only thing that doesn't work is the led light button wireless (F12). The button is working correctly, activation and deactivation of the Wi - fi, but not the led. It lights, neither white nor red, it is always disabled.

  The model of the wireless card is Realtek RTL8723BE.

  I installed the drivers from the HP site.

  Version of the driver for the wireless card is 2013.8.915.2014

  The version of the wireless button driver is 1.1.7.1

  I tried the latest drivers for the card (an optional windows updates finds) implemented to date for this and the wireless button (if I try update driver in Device Manager, it installs a new) but nothing has changed for good so I decided to go back to what the official site suggests and post here.

  Hi @v1184,

  Thank you for your inquiry.

  I understand that you had a hard drive failure and he had to be replaced, you did. You reinstalled Windows 8.1 and all drivers are up to date.  The only problem you are having is that the wireless button light does not illuminate, but it does not work.

  You tried to update the wireless driver button, but has not changed, so you returned back to the recommended HP driver.  As the wireless button does not work it is not the driver, however, it could be that the light burned. The other possibility would be that when you replaced the hard drive, the connection has been dislodged or disconnected and must be reconnected.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on ' Thumbs Up ' below is a great way to say thank you!

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.

• Satellite P300 - 148 Vista Ulimate - LED light button does not work

  My laptop model is Satellite P300-148.
  I reinstall system-vista Ultimate.

  However, after installation, my * mute button or LED light button * cannot be controlled by press mute.

  It's like, normally, when you press the mute, the light will be switched on or off.
  However, this is no answers when I press on it.

  I can only turn lighting on or off using Toshiba help.

  Also when I press the "play" button, the windows media player has no more answers.

  So is it a solution? Or drivers?
  Thanks for the reply.

  Hello

  I think that these buttons don t work properly due to the Vista Ultimate.
  I checked some threads here and it seems that the PPV that controls this Toshiba buttons don t support the ultimate or the ultimate doesn't fully support the VAP.

  But just a question;
  Did you check the Toshiba Assist-> Optimize-> Toshiba button Support?
  This tool allows you to configure the buttons. Maybe you should check this.

• The left button, scroll, zoom 5 x does not at all for the optical mouse for laptop Microsoft 4000 wireless

  Original title: laptop microsoft 4000 wireless optical mouse (1000 dpi) responding left button, scrolling, 5 x zoom works quite... tried to change the batteries, installed the app again and again and all, but do not get any results.

  the left button, scroll, zoom 5 x works at all... tried to change the batteries, installed the app again and again and all, but do not get any results.

  I noticed that if I press those buttons problematic that the laser is not blink / works as like other work button done.

  (tried mousinfo in program files, on the left the button does not)

  I thought to open for cleaning before I found you I can send help or advice...

  What should I do?

  far I could found the exit of microsoft or repair center

  I liked the 5 X zoom option which miss me most...

  Microsoft wireless notebook optical Mouse-mouse 4000 (1000 dpi)

  very appreciated

  Hello Rabbi,

  1. you remember to make changes to the computer before this problem?

  2 have you tried the mouse on another computer?

  Method 1:

  Alternatively, you can try to uninstall and reinstall the mouse and check if that helps:

  a. Click Start, point to settings and then click Control Panel.

  b. double-click system click on hardware and then click Device Manager.

  c. click on the PLUS SIGN to expand unit

  d. double-click on the mouse driver.

  e. tab driver, click on uninstall

  f. restart the computer and check

  See the following article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Method 2:

  If the problem persists, test the mouse on another computer in a different environment. If you can replicate the problem in a different environment, you have a defective unit. If this is the case, see the section "More information" for more information on how to contact Microsoft Supplemental Parts for a replacement unit.

  See the following article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• (F12) wireless button?

  Howdy, waiting for my new PC this Monday, Apr 25...

  Pavilion-dv6t-7000 QE

  X-64 Home Premium Windows 7
  Quad core i7
  SSD 32 GB cache
  NVIDIA 650 m
  A3F49AV

  I do not see a specific driver (on downloads pages HP driver for this model) for the wireless button as there are on the dv6t-7300 desire running Windows 8.   If I had to install Linux Ubuntu LTS 12.04.2, can I expect the wireless button to work without any problem?  I've read reports where the wireless button does not work on envy dv6t-7300 Win 8 after installation of Ubuntu.

  RDL

  Well, the PC arrived today.   Wireless button F12 working properly in Ubuntu 12.04 LTS using LiveCD.   BIOS is an option for Legacy bootable media turned on at the factory.   There is a Secure Boot option but it was disabled and grayed out.    MBR not GPT and all 4 partitions in use:

  1 System NTFS of 199 MB

  2 C: 676,67 GB NTFS

  3 recovery 21,66 GB NTFS

  4 HP tools Fat32 108 MB

  Everything seems to work perfectly!

  I will try to load Ubuntu 12.04 LTS.    I could copy the partition HP tools on a USB key, and then delete it and use it for Ubuntu.   Or I could try to disable the function Rapid Storage Technology, re - format the 32 GB of SSD and put Ubuntu.   However, response to the original question on this post.   I would mark this [SOLVED} if I knew how.

  RDL