Laptop HP 2000: 2000 HP Laptop Admin password or power on password blue screen
Help, please! I'm stuck on my laptop. At the start, I have the option to enter the password administrator or power on password but I have no idea what it is. I tried the old password journal, I had, but I had a virus and was hoping another hard drive from another HP laptop I had would fit (but he didn't) if all this started when I unplugged the drive hard hp 2000. When I put together this message arrives.
After 3 failed attempts, I get the message "SYSTEM DISABLED 54648749"
What can I do to find my laptop?
Thank you!
Hello
Enter: 41720389
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP pavilion g6: password blue screen
I have a hp pavilion g6 and my password blue screen or a power on password does not work. However, after three unsuccessful attempts, I get this code: 58829306. Pls I need help.
Enter 47781928
REO
-
HP 2000: NEED HELP Admin password
Im getting code 80159127
See your other thread:
http://h30434.www3.HP.com/T5/notebook-recovery/HP2000-admin-password/m-p/4900028 -
My laptop keeps itself start up after a blue screen lights
My laptop is a COMPAQ, whenever I turn it on it goes the logo of COMPAQ to a screen that says:
"We apologize for the yhr inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. »
It turns on and then it says:
Safe mode
Safe mode with networking
Nide wurh safe command prompt
Good configuration known to Las
Start windows normally
It doesn't matter that one I choose, it goes to a blue screen and tell me who. A problem has been dectd and Wondows was arrested to avoid damage. Then it shuts off and reboots itself over and over and over and over again.
Can someone help me please?
Looks like a hardware failure, how you proceed depends on whether you have a winxp cd real or only a recovery cd.
Your Compaq has no test utilities that are available when you start initially, perhaps by entering a certain combination of keys? The Compaq website for your specific model will tell you.
-
Laptop HP Pavilion dv7t after connection then blue screen display problem
My phone displays the Windows 7 login screen very well.
After I login, I see the desktop and icon and it flashes a couple times with a gray screen.
Next, I get a blue screen and restart the computer.
Any ideas?
Hello
The fact that it works well in Safe Mode, more points to a problem with the video chip. Unfortunately the video card (called a card or a built-in chip) is physically soldered to the motherboard.
That's what I would recommend.
As you can access the safemode, make a copy of backup all your important files, etc. Then try to reinstall the operating system or your discs recovery or Partition of HARD drive - if you still have the same problem, you could be quite certain that it is not software partner. As I mentioned earlier, if you could possibly connect the laptop to an external display and you still get this problem, you could then be confident that the problem is with the video card - in this case, see the link below. The page does not mention your particular model, but it can be useful in communicating with the guys.
Kind regards
DP - K
-
HP laptop 2000 13 folio: administration password request screen
Hey I forgot my password for my computer hp laptop foilio13-2000, and I put in my password recovery disk. now its locked on a screen that reads "Enter password or power password administration". I don't remember what the administration assigned password I chose. Can someone help me please... I don't really know too much about computers. IM embarrassed to say this, so be gentle. Give it to me easy. Laughing out loud. Thank you.
Hello!
Try this
34938919
Good luck!
Best regards: 1029rjmenvy17t
Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem
To help others find it and helps solve them the same or similar problems
-
HP 2000-2d19wm notebook: Admin password
I tried to boot in the bios administrator password appears then after three unsuccessful attempts system off code 55650071 need help
HP 2000-2d19wm laptop
Thanks in advance!
Hello
Enter: 40738077
Kind regards
DP - K
-
HP laptop: admin password bios
I have a HP laptop which friend set an admin / power password bios which is no longer, he remembers. After 3 attempts having failed, I get a code 93381416 system off. Can you please advise me as to how I can remove this password as my laptop is now worthless.
Hello
Enter 22089438
Kind regards
DP - K
-
HELP computer laptop has frozen with power on a black screen and flashing lights
Hi I have HP Pavilion dv 7-3162nr laptop. When I turned it on all the lights have gone but the screen was completely black. To add, the shift lock and numlock began to Flash all 3 secends. I have no idea why my laptop that was, but pls pls HELP all my tests and valuable information on the laptop. I'm dead without him! Thank you!
Hello
Try a Hard Reset as follows.
Shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery, connect the AC adapter and see if the laptop boots.
If the above doesn't help, see if you can match the sequence of "Flashes" to those shown in the table below.
Kind regards
DP - K
-
Administrator password blue screen
When I try to boot my netbook it takes me a black screen with a blue box saying: "enter Adminitrator s password or power on password. After you have entered a wrong password 3 times it says "System disabled" and displays the number of '66909592 '.
At the password prompt, try 79661514
-
Password administrator or power using password blue screen
My stop code is 67281019
Ive tried admin, [White] but not to work, is there a way to fix this?
Enter 78189039
Kind regards
DP - K
-
The contextual wonderful "Enter the password administrator or power on password" blue screen
I have a HP Pavilion DV7 with windows 8 with the same problem that others have here, what can I do to stop the "password administrator or power on password" popup
Thank you
Hello
Try to enter: 49161991
Kind regards
DP - K
-
my code is 93945856
Hello
Please enter:
22623298
Kind regards.
-
Hi, I'm having a bad problem blue screen with my computer hp dv6-1245dx laptop. I'm stuck on a blue screen at very random times, starting with an appearance a few months ago, followed two months with no problems, then some crashes in a row of three weeks, followed three weeks of good use. Over the past three days the occurrences are practically every 10 to 20 mintues, randomly, and they need a few minutes to wait before it will turn the crank upward again. (If I do not expect this shortly, it will crank but it throws a black error screen saying "No operating system found") I'm afraid this is some hardware problem, like HD about to give default. I ran the Diag.exe Image from the first post on this forum and have this available newspapers cab file. I also have a picture of the blue screen (it's the same thing every time, the error is a STOP: 0x000000F4). Please notify.
Hey robwats83,
If the test fails the drive needs to be replaced. There are bad sectors on the drive that can cause an accident at any time at random.
The fact that the PC works now only tells you that a good amount of sectors are in decent condition, but once again, this could crash completely at any time and you want to be ready for it. It's a bit like a small chip paint on a car. It looks good at first but it gets out of control fast.
You have your saved information, which is great, most of the people do not get this chance before a crash. Replace the reader of that time isn't really necessary, but should be done as soon as POSSIBLE, so you're not in the middle of something when it finally dies.
I hope this helps!
-
Laptop computer displays a blue screen error about corrupt or missing files in Vista
went to get on my laptop and all I have is a blue screen and a mess that says missing or corrupt
It's Windows vista and it doesn't have me send a boot drive
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
How can I force pop-up windows to open in a new tab
We have a new software which always opens a context menu when you click on links to Java. The contents of such a resizable window fits perfectly in a new tab.I would like to force these new windows in a new tab.Blocker is active and that the internal
-
Since the release of the iOS 9.2.1 software [and even before that]-on the App Store, I have several 'pending updates' which in fact have already been updated! Please, can someone explain why? Thank you all, brgds
-
I need to get a new adapter (old one broke) obviously not anywhere listed. AC adapter model No. is PA3237U-1ACA. Is what kind of power? It might help to find a compatible (even if not the same)...
-
your dleccoms.exe said is blocked so I can't print how to unlock it
My printer does not work, I ran a check and they said dleccoms.exe and dlecubgw.ece are blocked and I need to help, but don't know how to do...
-
Cannot show the desktop on the TV.
Title original Victorinox: output video s and not showig Office TV Since the re - install Windows XP after a hard disk failure, I am unable to view my desktop on TV. Control panel / display shows the connected TV and work. The screen saver appears i