Laptop HP Envy m6 n113dx: Ethernet will not be detected and when I check the drivers miss the network LAN driver

Similar Questions

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Question of illegality leading to Windows 2008 Server with more than 80 updates that will not be updated and a pilot for the series it won't install

  From of the CBS.log journal:

  2016-01-07 16:55:10, enforcement operations 1 CSI Info 0000085f; 1 will not lock/unlock and follow:
  Installation (5): flags: 0 tlc: [2f8866815daa89b0e3664a874948093e, Version = 6.0.6002.19439, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:150 {75}] "' Package_2_for_KB3075220 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0.3075220 - 5_neutral_GDR ' ncdata: [2] {1} '2'") print: (null)
  2016-01-07 16:55:10, the change of information CSI 00000860 list components: {(null)-> 6.0.6002.19439 2f8866815daa89b0e3664a874948093e, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral}
  {6.0.6002.18356-> 6.0.6002.19439 Microsoft-Windows-TerminalServices-ClientActiveXCore, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral}
  2016-01-07 16:55:10, error CSI 00000861@2016/1/7:08:55:10.470 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2016-01-07 16:55:20, error CSI 00000862 (F) STATUS_ILLEGAL_CHARACTER #4243867 # to CFileInstaller::CommitChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000863 (F) STATUS_ILLEGAL_CHARACTER #4243866 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, info CSI 00000321 SMI primitive installer [completed]

  2016-01-07 16:55:20, error CSI 00000864 (F) STATUS_ILLEGAL_CHARACTER #4242866 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000865 (F) STATUS_ILLEGAL_CHARACTER #4242865 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000866 (F) STATUS_ILLEGAL_CHARACTER #4242864 # to CCSDirectTransaction::ExamineTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000867 (F) STATUS_ILLEGAL_CHARACTER #4242863 # to CCSDirectTransaction_IRtlTransaction::ExamineTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, d:\longhorn\base\lstring\lblob.cpp(2217) 00000868@2016/1/7:08:55:20.757 (F) CSI of the error: error STATUS_ILLEGAL_CHARACTER from the RtlTranscodeLBlobs expression function: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2016-01-07 16:55:38, error CSI 00000869 (F) STATUS_ILLEGAL_CHARACTER #4244511 # to CFileInstaller::CommitChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 a (F) STATUS_ILLEGAL_CHARACTER #4244510 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, info CSI 00000322 SMI primitive installer [completed]

  2016-01-07 16:55:38, error CSI 0000086 b (F) STATUS_ILLEGAL_CHARACTER #4243994 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 c (F) STATUS_ILLEGAL_CHARACTER #4243993 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 d (F) STATUS_ILLEGAL_CHARACTER #4243992 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086e (F) STATUS_ILLEGAL_CHARACTER #4243991 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086f (F) HRESULT_FROM_WIN32 (582) #4242712 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CSI 00000870 (F) HRESULT_FROM_WIN32 (582) #4242527 # to Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_102_(0x00000066), pSink = NULL, disp = disp, coldpatching = FALSE) [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CSI 00000871 (F) HRESULT_FROM_WIN32 (582) #4242526 # 34399459 us by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x00000066,_pSink_=_NULL,_disp_=_0)
  [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CBS Exec: could not validate transaction CSI to run changes. HR: 0 x 80070246
  2016-01-07 16:55:38, Info CSI CSI Transaction 00000872@2016/1/7:08:55:38.994 @ destroyed 0x1b9b710

  CheckSUR.log:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.23186
  Version of the package 25.0
  2016-01-07 13:00

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1308
  No error detected

  Control CoreOS key to repairing the corruptions.
  Winner version: 6.0.6002.18005.
  The architecture of the processor: x 86.
  Check the key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18005&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers \metadata\elements\ComputerName
  Recreated the value: @_type.
  Recreated the value: @dataOnly.
  Recreated the value: @default.
  Recreated value: @description.
  Recreated the value: @displayName.
  Recreated the value: @handler.
  Recreated the value: @legacyName.
  Recreated the value: @legacyType.
  Recreated the value: @migrate.
  Recreated value: @scope.
  Recreated the value: @xsd: type

  I tried following https://support.microsoft.com/en-us/kb/942968

  The GlobalInstallOrder.xml both the install.wim from the disk image of Windows Web Server 2008 x 86 and for KB955430 files under %winroot%/winsms both starting.

  Any ideas on how to determine what is the cause, updates do not?

  In addition, I have a lot of lines like these:

  2016-01-07 17:03:02, info CBS Plan: jump package since its start State and the target State are both missing for the package: Package_for_KB2654428_client ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0, current: 0, pending:-16, start: 0, there is: 0, oriented: 0, limit: 4

  Please post your query to the Technet forums as linked server

  TechNet - Microsoft forums

• my cd rom will not completely close and when I close it restarts the computer in safe mode. in the technet event log it says the following: IO_ERR_BAD_BLOCK

  The cdrom will not close completely and it won't open when I push the Open button.  When I manually open with a paper clip then close again he still doesn't close completely and it restarts the computer in "safe" mode  In the same newspaper, it has the following:

  Log name: System
  Source: cdrom
  Date: 20/03/2011-16:18:10
  Event ID: 7
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Jeff-PC
  Description:
  The device, \Device\CdRom0, has a bad block.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7
      2
      0
      0 x 80000000000000
     
      169760
      System
      Jeff-PC
     
   
   
      \Device\CdRom0
      0F0080000100000000000000070004C0000100009C0000C000000000000000000070EB1C000000006378060000000000FFFFFFFF01000000580000C40201000000200A12480200400010000004010000000000000000000048CC860580FAFFFF0000000000000000407B930580FAFFFF806BAC0580FAFFFF6E9D030000000000280000039D6E00000200000000000000700003000000000A00000000110500000000000000000000
   
  

  I'd appreciate any help you could provide.  Thanks in advance.

  Hello

  Looks like the CD-ROM drive is a failure. Uninstall and reinstall the disc and check if this solves the problem. If the problem persists, you should replace the disk.

  To uninstall the drive from Device Manager:
  a. Click Start, then type devmgmt.msc in the start search box then press ENTER.
  b. right-click on the CD and click on uninstall.
  c. restart the computer.

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• WMP library will not delete files, will not add files and in all songs albums are missing!

  WMP library went crazy!  The song in my library are missing.  When I try to delete files from my library, it won't remove them and when I try to add new files to the library, it will not add them.  Help, please!

  Hi ljatos,

  You can try this link to add folders to your library?
  http://Windows.Microsoft.com/is-is/Windows7/add-items-to-the-Windows-Media-Player-library#
  If you're still having problems, you can try to restore your windows media player.

  (1) Perform SFC first. Follow the link on how to make SFC (http://support.microsoft.com/kb/929833)

  (2) turn on / off Windows Media Player again.

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on the "Turn Windows features on or off".

  c. check the "media features.

  d. restart the computer.

  You can also try restore (http://windows.microsoft.com/en-us/windows7/products/features/system-restore) your computer to the final point where windows media player worked.

  Or you can use the previous versions of windows media player that comes from restore points or windows backup.

  Or you can try to run 'Fixit '.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Some applications Windows 8 will not be open and constantly return to the start screen

  Some Windows 8 applications (calendar, Photos, Messenger, etc.) do not open and return to the start screen. I updated the computer, so the apps worked during this session.  However, after that I disconnected and re-connected to the laptop the next day, the same apps stopped working again.  This continues that occur on a regular basis.  How to solve definitively the problem?

  Note: I noticed that others have this same problem, and I tried the troubleshooting suggestions (i.e., to download the troubleshooter of the modern user interface, cache cleanup, etc.), but none of these suggestions has definitely solved the problem.  I bought my new laptop two months ago and have been facing this problem since.  I want a permanent solution.

  See http://answers.microsoft.com/message/6f3aa7c2-feff-4fdd-a9b0-5d10ea4e604b>
   
  W8 comes with built in AV from Microsoft (Windows Defender) solution. You do
  not actually need a third party.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• SWTOR: could not retrieve data fix. Please check the network connection. (208)

  OK, so my Launcher is not working now, I did not change my system or the folder of the game... except that... the new patch THEY come out. Now, it will not work. Any suggestions?

  I suggest that you check here, but you can also proceed as the system restore to a restore point before you tried to apply the patch.

  http://www.SWTOR.com/community/

• Common interface of JS does not work for me when I check the generated swf file

  Hi all

  Get up to speed on the use of Javascript and 8 Captivate. I work with what adobe own examples discussed here: JS Common interface .

  I downloaded the project, published under the title of HTML5 and SWF and posted on our server.

  HTML 5 version

  Open the swf file

  When you click on the buttons in the HTML5 version, you can see the content of the change of the content area. This does not happen in swf (the XML is a counterpart of the swf file in the same directory)

  Looking at their model of box, I think that maybe they mean that the html page must be involved for the js to work (that is, you need to link to the page instead of the swf file)? Maybe this is already known by everyone else, so forgive me... but can you just use the swf file (in this case, including the XML with it) and do the work of javascript?

  In the end, I really don't need features xml... I'm just trying to play an audio file and give buttons, click on a State visited and in the context, I'm trying to use it, I can only download a swf file, not a html file that displays a flash element. Maybe there is an easier way to do... But I didn't pursue a js route if js will not run in this case.

  Thank you!

  
  

  I think that you need a html file to make javascript work.

  You can use advanced actions to display a different button once the original has been clicked.

• Computer laptop HP Presario CQ57 (Windows 7) will not start.

  Computer laptop HP Presario CQ57 (Windows 7) will not start.

  Memory test: past

  Smart Check: spent

  DST short: failure

  ID Q7PS33-5T76ND-MFKR5F-60VV03 failure

  Product ID: QE321UA #ABA

  Hard drive

  Hello:

  The failure of DST short is normally indicative of a hard drive that has failed and must be replaced.

  The operating system and the software can be reinstalled using recovery discs that you made or purchased from HP.

  In order to use the recovery disks, you need to replace the hard drive with one of the same storage capacity or more.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• PowerPoint will not recognize my productkey reference located on the lower part of the Pc - ideas, please

  PowerPoint will not recognize my productkey reference located on the lower part of the Pc - ideas, please

  Hello

  Office, which belongs to PowerPoint is not included with your purchase of computer for free.

  Most new computers come with a trial version of Office that lets 'x' number of days usuage.

  After this test times out, you will have to buy Office.

  And the product key on the computer case or laptop for the operating system, not for the desktop Suite.

  Here is the link for the Microsoft Store to Office products:

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Office_Category_Page?ICID=Home_4up_1_OfficeCatPage

  And you might be interested in the free Open Office Suite of Office Applications.

  http://www.OpenOffice.org/

  For any other question about Office, please repost in the Office Forums:

  http://answers.Microsoft.com/en-us/Office

  See you soon.

• HR HTML 9.02 and Source Control 3.1 will not save files in design mode, only the HTML view.

  We use RoboHelp 9.02 (just 9 and charged the next day so up-to-date, we 9,02) and Robo Source Control 3.1 and when we check a file and change the file, we can not save the file in Design view.  If we click on the HTML mode, we can save the file.  We have reproduced this on multiple files at the same time our computers accessing the server.  Now using RoboHelp HTML on a local project is functioning normally, only when we have access to the files on the server we select the HTML mode in order to save the topic.

  While this is an acceptable work around short term, we need this bug to get fixed unless someone knows of a checkbox somewhere that we must check in design mode to record and studied.

  I will be happy to provide you with any input and or test the additional fixes to help to fix this bug.  It is completely reproducible and constant on all tested subjects.  Source code control works insofar as this case the subject is verified by one the other cannot access the topic.  Once the topic is saved in HTML, then the subject can be archived and changes are visible by the other author.

  After the installation of Robo 9, Adobe Acrobat Professional 8 has been removed from the computer and MS Word 2000 did not work.  I've upgraded to Office/Word 2003 and I can now use Word 2003.  I have not attempted to reload Acrobat yet but that is next on my list.  Acrobat Professional was removed from these two computers during the installation.  Word 2000 exists only on the laptop.  I was in the queue to get updated later in the year, so they gave me a key and Word 03 seems to operate normally.  Did not check the Excel or PowerPoint 2000.

  Other news, you may be interested to know:

  • Both computers use Windows XP.
  • Both have office 2003.  -C' is because Word 2000 stopped working when Robo 9 has been installed.
  • Both have with max memory 32-bit operating systems.
  • Both have multiple monitors.
  • One is a laptop, the other is a desktop computer.
  • Both computers had 8.02 Robo? but RH8 was uninstalled before installing RH9.
  • 3.1 source code control has not been reinstalled on the server since version was the same that came with RH9
  • Source control has been reinstalled as a step of troubleshooting on the laptop without change.
  • RSO3 middle-tier service is running on all 3 computers and RSO3 server runs on the server pc.
  • Two users have administrator rights so all of the checkboxes are checked for access and control.

  Kind regards

  DV

  Having identified some problems in our global variable file in another project, I had a look at this project and found a few variables were empty, have a mystery character input or information applied to the variable fonts.  Rather than change back the variable only one digit or a character with no set form and text input in variables of the virgins, I deleted the unused variables of the project that just happened to 99% of the variables because we divided this part of the project in a booth along the project.  Remove the variables solved the problem where we had to switch from Design view to HTML view in order to save a topic.  I find this rather strange since none of the topics referenced stray variables.  Now we have only the variable of the version that refers to all subjects in the foot.  Everything seems to work fine now.  If you encounter this problem, have a good look at your file of global variables, line by line, to see if there is something other than text or numbers and delete everything except for the text.

  DV

• Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

  I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

  Delete the app first, only then it re-download again.

  If not, try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help?

  Try to upgrade OS 10.6.8 to El Capitan on iMac. But the FREE update tells me it can not install but will not say why even when I click on learn more. Suggestions? Help? Appreciate the assistance.

  More details on the iMac you have and how much RAM is installed would certainly contribute to answering your question.