Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

Similar Questions

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Open my laptop, now it does not start

  Hi everyone, the first time poster.

  I opened my laptop (touchsmart tm2 1070ca) to attempt to clean the keyboard and now it does not start at the top.  all the LEDs light up, but the caps lock LED flashes.  The fans and hard drive look about 2 seconds before silence, and about 10 seconds later, the laptop beeps loud and then stops.

  When I opened upward, the touchpad is detached from the motherboard. I finally get it reconnected, but it turned out to be very difficult.

  I tried the Bios recovery suggested on the support site, but it had no effect.

  any help would be massively appreciated.  no no not my laptop will really make my life difficult.

  I know this is an old thread but since there was no solution, I felt should display what has worked for me, in case someone else has this problem.

  This morning my computer refuses to start and the caps lock blinked. I've read elsewhere that a user of a model different from simply removed HP sound CD ROM and re-inserted. My laptop is a HP tm2 Tablet PC, so it doesn't have a removable CD ROM, but I was wondering if another device had become "loose". First, I removed the dongle USB for my mouse and battery and then restarted. That did not help so I forced a stop down (press the power switch.) Then, I opened the background panels and reinstall the RAM (actually happened two sticks to make sure) and removed and re-inserted the HD then restarted again. I don't know which of these factors did the trick, but it worked.

  Hope someone finds this useful info.

  G.

• HP Pavilion dv6910us does not start

  HP Pavilion dv6910us will not start. Power, bar of quickplay, touchpad and dvd lights on then just immediately stop no beep codes or fan sounds are heard. Also tried the hard reset and no luck.

  Any help much appreciated.

  Hi @jaimet1, @Sinister , @stevestock1 , @Kscarlisle , @Abdullah_Ali ,.

  Thank you all for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked at your question about your HP Pavilion Notebook and starting problems.  If you have replaced the motherboard and it is always the case - it isn't the graphics as graphics are attached to the motherboard. Here is a link to computer will not start.  I start at the top and work my way down.

  Mine has been corrected with the relocation of the HARD drive. Others must have fixed with just reinstalling the memory. Here is a video that shows you how do to remove and reinstall the HARD drive and memory.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can Reset the BIOS with this document by selecting the reload the default BIOS settings. Helping others it restores the default settings.

  I hope something here helps anyone of you difficulty the laptop.

  Thank you.

• Pavilion M6-1045dx: HP Pavilion M6 does not start

  My computer does not start.  Screen is dark, even if I hear a fan.  When I tried to start, it turns on and turns off after a few seconds.  I removed the battery and the power turns on but does not start.  I tried a hard reset, nothing helps.  I also eliminated a fo the two strips of RAM and tried to start with each of the two, but this doesn't work anymore.

  I had installed a Samsung SSD a year ago and everything worked fine.  Last night, I reinstalled the rotation of the original hard disk supplied with the computer and the computer booted.  I reinstalled the SSD and everything worked like new.  In other words, until this morning.  same symptoms.

  How to diagnose and fix?

  I forgot to mention that after I installed the original hard disk, the bios updated and the computer worked fine until this morning.

  Caps lock key seems to blink twice, but the model is difficult to discern.

  Hello @Dakest,

  Thanks for the quick response!

  Please see the following documents and let me know how it goes:

  HP computers - HP BIOS selected Application is damaged or missing

  HP Notebook PC - restore BIOS

  If you're still having problems, then you can consider replacing the CMOS battery, to see if this solves the problem for you.

  I hope this helps.

  Have a great weekend!

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• My Pavilion g does not start. The switch does not work. Any ideas how to start the computer?

  My laptop series HP Pavilion G7-1135sd will not start. I get no response from the switch. Some lights come but the display does not illuminate. I tried holding down the power switch for long periods - without success. I tried to take out the battery - also without success. Any ideas?

  Hi @DutchyH,

  Welcome to the Forum.  Sorry to hear of your problem power button on your HP Pavilion g7-1135sd.

  In a situation like this.  You have removed the battery and tried to push the power button with out.

  Have you tried while he was not powered as well.  So basically, remove the battery and hold the power button for 40 seconds with the power cord not plugged in.  Then replace the battery followed by power cord.  Then press the power button again.  If it does not at this stage I would contact HP support by phone.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Telephone support for other regions.

  I hope this has helped you.

  Thanks again for posting and have a great day.

• My HP laptop with vista does not start.

  Vista will not start. Startup Repair says it cannot start automatically. Stuck in a loop without any difficulty.

  Hello

  Please tell us the brand and model of this computer. Also, you happen to still have discs Windows Vista of origin that goes with it?

  Looks like we'll have to try to recover directly from the CD so if you don't have it, I would like to talk with the manufacturer of the computer for another copy

• Pavilion dv6 does not start.

  I realize how close to, it is impossible to help someone fix a computer on the Internet, but I thought I should give it a shot.

  When I start the computer to the top, volume, power, wifi, the trackpad lights and numlock LEDs and fan turns on, then only the capslock light flashes. Nothing else happens. The screen remains empty and therefore does not allow me to get into the BIOS. No more noises not coming from the laptop. I am unable to do anything to change the lights on the computer. Pressing caps, numlock, winlock or the trackpad button do nothing.

  I don't know what caused the problem. The computer worked well the night before and the next morning, when I tried to turn it on, it happened. I think that the symptoms I have outlined point to a hard drive problem, and my warranty has expired. So before I crack this thing open and start playing with it, someone has it any suggestions?

  Hello

  As you're laptop is out of warranty, the best advice I can give would be to take it to a local computer repair shop and get an estimate (and to confirm the diagnosis) for the cost of repairs.  At cost less this way you can weigh-up this repair against the cost of a new laptop and then a decision.

  Kind regards

  DP - K

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Pavilion A1507UK does not start until left and turned on for at least 5 minutes before trying again.

  Sorry if this is a long post on a stupid problem but it baffled me completely. It started a few weeks ago, that is to say not start when turned on first, but start normally have been left at least 5 minutes.

  My first thought was that the hard drive may be failing, so I bought a new one (same model) and cloned the original using Seagate DiskWizard. The swapped and the fault was still there.

  Then the food. Bought another (identical) and them inverted. No difference, still don't need warm up before boooting. Both power supplies tested A1 on a multimeter.

  OK, so it must be the motherboard. Bought another (identical ECS RC - 410M rev 1.03) a Pentium 4 CPU and new radiator and fan to go with it. Swapped their course and other BIOS of Compaq and not HP, cela worked perfectly, in addition to having to be put on for 5 minutes before you start...!

  Tried original power with the new motherboard - started immediately when first in market but the next morning - no change. Pointing to the motherboard (being hot when we food supplies changed) again.

  The only thing I haven't changed is the memory and the on/off switch (I tried fill the pins on the map and the fault was still there), but that passes all the tests I can throw at it.

  Then I read about the bad capacitors. Found 2 those inflated in the region on the original Pavilion on board voltage regulator and was able to change them for 2 new hats of Nichicon, thinking it was the answer. It wasn't. Return all right, swapped boards is dory hunky apart from the refusal of this computer to start when the first step. Also I can't find a single capacitor bad look on the Compaq Board that shows the same characteristic.

  I am now at the stage that I think that someone else must have met this problem if I now get with almost 2 completely different computers. There must be something really stupid that I didn't think or an amazing series of coincidences if all these bits are bad.

  Help someone?

  Eyemdee, have you tested the memory.  I had almost the same problem when I built my last computer.  Finally, it came down to memory.  I replaced it and everything was fine.  As I said, I would test it before buying more, however.

  If your problem is solved, please click "accept as a Solution.

• I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

  I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.

  Hello:

  You need to get a USB to SATA 2.5 enclosure "HDD.

  Have you thought about the plug of hard disk drive?

  The thing that looks like this?  That is removable. Just shoot.

  

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• HP Pavilion dv9260nr does not start after the bios update

  After the HP Health Check, it was recommended that I have updated to the current bios.  After you have downloaded and installed, the computer would not start.  Instead, it emits a long beep and 2 short beeps and the screen is blank.  How can I recover a bios update failed?  Is there a way to return the computer to the bios Setup?

  I thought I would post here to help others as I just spent 5 hours to fix this problem. I have personally experienced this on two different computers, both are model DV9260NR. I woke up in the long and short two beep power. The first time it happened, I tried to fix the BIOS by using the recovery disk, but it didn't work. I tried this using a USB floppy like any other player. The floppy drive should get accessible, then machine would be on a second beep then stop, but it would remain under tension. The first time around I gave up and eventually return it to HP as it was under warranty. This time above the current problem computer is more under warranty so I decided to test out of old college. After trying several discs crisis different Phoenix, I finally found one that worked.

  I downloaded crisdisk.zip here:

  http://www.mediafire.com/?3ccb9m0kv0m

  Followed by the latest bios from HP for the DV9260NR

  FTP://ftp.HP.com/pub/SoftPaq/sp42001-42500/sp42187.exe

  I used 7 - zip to extract the files in sp42187.exe and crisdisk.zip

  go to the folder where you extracted sp42187.exe and rename it to 30BBF2D. WPH into the BIOS. WPH

  Copy BIOS.wph to the folder where your snippet CRISDISK.zip

  I have created my disk in Vista, so don't worry about going "Real DOS".

  YOU MUST USE CRISDISK TO CREATE THE DISC!  SIMPLY COPY THE RIGHT FILES ON A FLOPPY DISK DID NOT WORK!

  Open a command prompt, I used command.com not cmd.exe

  CD to the folder CRISDISK.

  At the prompt enter: "CRISDISK. "BAT HAS:

  Finally, put in a blank disk and follow the instructions.

  Once the disk created, slap this puppy in a floppy USB drive and plug it into the computer.  I didn't need to use as or Windows + B, B FN hotkeys to trigger the BIOS recovery. The system entered in the BIOS for me recovery mode and tried to access the USB floppy.  I noticed that not all USB ports will work.  I plugged my USB stick, floppy to the next to the power supply.  If all goes well just turn on the computer with connected USB floppy drive and the disc in the drive. As before the system beeps once per second during playback of the disc.  The disk activity, arrested again, but this time that the system kept beep immediately after discontinuation of access to the drive.  These beeps point you out that the BIOS is flashed, it's just leave turn. When it was made the machine itself set off.  If yours is not, so I doubt that the BIOS recovery will succeed. I then unplugged the USB floppy drive, turned on again and to my surprise I was greeted by the HP and the BIOS logo!  I hope this helps people difficulty of their DV9260NR.  I met four dv9260nr machines and two of them does not update the BIOS using WinPhlash and the finished machine trashed, not good statistically.  I hope that others with the same model will be able to get their machinery running. I'd be curious to know if it works for others.  Post here if you are or do not succeed using this procedure. Good luck!

• Computer backup button does not appear in the "backup and Restore Center window.

  Hello!

  I've seen some computers that are running Windows Vista Edition home premium 32 y 64 Bits I can't do a "computer backup" in case I have to restore the computer from an Image made by this process because the "Computer backup" button is not in the "backup and Restore Center window.

  As you can see in this link:
  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  You can see 4 buttons, I only see 2:
  -Backup files
  -Restore files

  Y at - it an update that makes these buttons appears in "Backup and Restore Center Window" or is the Version of Windows or of what it is. I find no answer yet.

  Thanks for any help!
  abasilis

  N °

  You have the right version of Vista and there is NO update to change, but you can BUY a Vista Upgrade operating system...

  http://www.Microsoft.com/Windows/Windows-Vista/get/Anytime-Upgrade-overview.aspx

  Upgrade Home Prenium to ultimate.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  If you read this link, that it is said that you can NOT make a backup of the computer in Vista Home versions.

  You need 3rd Party software to do this:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  See you soon. Mick Murphy - Microsoft partner