Laptop HP Pavilion dv5 with perishes-Windows 7 Home Premium

Similar Questions

• I had trouble with my windows 7 Home premium, I downloaded again and ended up with 2 windows 7 hard disk, how can I delete one?

  I had trouble with my windows 7 Home premium, so I downloaded it again, now when I connect it has windows7 and windows Home premium, but the family version premium won't load, how to remove this version of my hard drive?

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

  http://NeoSmart.NET/DL.php?id=1

• Trade with three windows 7 (Home Premium) for a 10 Pro key Windows key?

  Hello, I have a Windows 7 Home Premium Family Pack with 3 product keys. It's a pretty expensive purchase at the time where we got it, but now we have new computers by new windows on them. If these product keys would be to lose. I wonder if I can swap in these 3 product for Windows 10 Pro touch numbers?

  I understand that these 3 keys can be used to upgrade to Windows 10 Home, and yet we don't use them at all, unless I update one of these keys to Windows 10 Home. Yet I exchanged rather these 3 product keys for Windows 10 Professional version on this computer.

  Thank you

  Home Premium Family Pack is a product of 'Upgrade '. Thus an earlier version of Windows must be installed to upgrade to Home Premium.

  Note: Family Pack has 1 only product key to use / activate no more than three computers.

  There is no trade in option available at this time.

  J W Stuart: http://www.pagestart.com

• crashed hard drive... need help with original windows 7 Home premium 64-bit on new h.d.

  a win 7 64bits h.p... a h.d. failure... installed a new h.d. which had vista (sp2) h.p. on and I want my windows 7 back... is there anyway to give the product I.D. is on the side of my Tower for the microsoft 7 windows that has crashed and I would like to download a copy on the new hard drive? IM wondering if I need a proof of ownership or what anyone like that I bought from a friend's computer and its probably not in my name... I was wondering if this is a problem major and if theres nothing I can do... maybe download a new copy and just enter the product ID I don't know... IM really not too tech saavy... any help would be greatly appreciated... Thank you

  So what you want to do is put windows 7 to replace windows vista on your new hard drive?

  Step 1: Download the ISO file.
  You will need a cache of DVD or a USB flash drive (3 GB or better), if you insert a DVD, then it will ask you if you want to use it with a DVD player or a usb flash drive. Check the box to a DVD player or something similar to this. With a flash drive, you don't have to worry about setting up or anything.
  Download the ISO of windows 7 Home premium 64-bit.
  Here is the link:http://msft.digitalrivercontent.net/win/X17-58997.iso
  Be patient as it can take an hour to download on a medium speed wifi connection.
  Step 2: Burn the disk image to a DVD
  Now that you will burn the ISO on DVD once it's done. To do than go to where ever you downloaded the ISO on your computer and right-click on the ISO file. Now click on burn the disk image.
  Make sure your DVD is inserted. When asked what disc burner, select the drive that you inserted the DVD in. If you have only 1 DVD player you should have only 1 option. Now hit burn and go get coffee or something while you wait.
  Burn the image on a USB flash drive
  But if you don't have a DVD, you can always use a USB flash drive.
  You need to download Universal USB install 
  Now open universal USB install and it will ask you to choose a Linux distro. Keep scrolling down until you find "software based on other or non-linux".
  Select windows 7 Setup from there. Now step 2 hit browse and find where you downloaded the ISO image. Now, select your USB flash drive letter. It takes only 1 option. And click on create. And when it asks you if you want to format? Click Yes.
  DON'T FORGET TO BACKUP YOUR FLASH DRIVE PROBABLY ALL THAT FILES WILL BE DELETED IN THIS PROCESS
  Step 3: Boot from your DVD or USB
  Restart your computer, and while it loads the bios, it must be said somewhere boot options. And there will be a F1, F2, F3, or some F key to enter the boot options.
  After that, select the USB flash drive or a DVD drive to start. You will get to the windows installation and you can install windows 7.
  It will ask you your product key. It is in any way illegal.

• TorrentViewer is not compatible with my Window 7 Home Premium

  Hi, I downloaded an MP4 player who must play with Torrent Viewer but unable to PLAY. the compatibality... a list of edition of the window appears but there is no windows 7 Home Premium in it.  Help, please.

  Hello

  -You are able to play the MP4 video in any other video player?

  -You are able to play all the other videos in the Torrent Viewer?

  If the problem is with Torrent Viewer, then I suggest you to uninstall and reinstall Torrent Viewer in compatibility mode and check.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, then I suggest that you contact the software vendor to improve assistance.

  It will be useful.

• Why my laptop (hp Pavilion dv5) with windows Vista service 2 becomes hot little after I start it?

  My laptop HP Povilion dv5 (Notebook) get hot after awhile I connect and sceer becomes black breast t0 10 to 20 minutes. I want to know the reason and the solution.

  Hello

  overheating can cause sudden stops of your machine.

  with a laptop computer, make sure that the vents are regularly cleaned of dust, etc.

  Also make sure that the laptop is in a well ventilated area, not used on the bedspreads, blankets, etc.

  If above does not solve you may need to provide computer technology to clean inside and make sure that the fan/s work properly

• says my version of windows media technologies is not compatible with my windows vista home premium how to fix this

  my windows media technologies is blocked that run said is not compatible with my vista home premium how to fix

  Hello

  I will need some additional information to help you best.

  ؠ exactly when you get this message?

  ؠ What is the exact error message you get?

  Could ؠ you explain your problem in detail?

  In the meantime, you can follow the instructions that might help you resolve the issue.

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  1. At prompt command, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Invalid activation key Windows 7 Home Premium after re-installation

  I have a laptop HP Pavilion G6 with recovery of 7 Home premium windows installed on the hard drive. (I don't have any drive recovery). I had to use Ubuntu for awhile, so I lost my recovery. However, I have always the product key, so I installed windows from a copy, which I downloaded from the Microsoft Web site, and when I insert the key to activate windows, it is said "Home Premium de Windows 7 key you typed is invalid for activation. What should I do? I tried the thing of activation of phone but they keep hung up (the answering machine, computer or whatever it is).

  Please help me, what should I do?

  Skip entering product key and complete the installation.

  then try to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  See the following topics:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Pavilion dv4 3138tx drivers after reinstalling plain windows 7 Home premium

  My Pavilion DV4 3138tx laptop recovery disk was crushed, and HP did not recovery disk when you bought it. I need to download the windows 7 Home premium of the site "mydigitallife.info' to download the legalized 7 reinstallation windows image. After installation, OS works, but a lot of drivers seem doesn't work does not, for example, the ethernet network controller. I tried to download the driver from the official site of HP for the 3138tx model, which is network realtek LAN driver, but after installing, it says "xxx file not found", somehow, it does not work, and HP support told me that they cannot help me, asked me to go to realtek... I looked towards the top of the network controller hardware ID, it's PCI/VEN10EC DEV8168SUBSYS... @$ %& ^ * (& ^, I looked in google, it's the for a 10/100/1000 gigabit LAN network card realtek chip.) Very strange, can anyone help me?

  As per the advice of HP, I also tried to reinstall the chipset driver, appearing on the official website of HP for 3138tx drivers model, it did not help either. My laptop was bought in Malaysia with origial windows 7 Home premium edition in English, the product key at the bottom of the machine.

  Hello:

  The file is too big for me to send an email to you.

  I downloaded on my skydrive folder, and you can click on the link below to go to my Skydrive folder.

  Download the file of the driver named Win7_Realtek 8168.zip.

  Unzip the files in a folder, and then run the AutoInst.exe file.

• Lost my backup of windows 7 Home premium CD and also formatted my hard drive full

  Hello

  I have Pavilion DV6 7012tx which was delivered with genuine windows 7 Home premium. Once I tried to install Ubuntu Linux and ended with windows 7 crashed. I lost my cd of windows backup 7 and that I needed my laptop upwards and runs it immediately so I formatted my complete hard drive and created new left and installed windows xp. Now I want my to my windows 7 back. Please help me how can I getgenuine windows 7 back?

  Hello

  You can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Breakdown of connectivity: Windows 7 Home Premium < == > VM {Windows 7 Edition Home Premium |}

  I am running Windows 7 Home Premium 64 - bit on a Dell laptop.

  I am running Windows 7 Home Premium 64 - bit on a virtual machine (VMware Fusion) on Mac OS X 10.11.3 El Capitan.

  I blew all efforts to change each setting to turn on network discovery, passwords...

  In no case the Homegroup 'join' ubiquitous option.

  Is there a reason that, even as an administrator, I am unable to change settings that will remain?  Windoze, for some reason, changes all the options for sharing, sharing, etc. in the original advanced settings.  DUH!  Not surprising W7HP in the virtual machine can never see the Dell W7HP.

  Whaddup widdat?

  If (Windoze == teflon) / * maybe this should be (gales):

  While (Windoze is Teflon)

  {

  NOOP();

  }

  given that nothing seems to work "according to the documentation.

  even when I *.

  */

  {

  CommitSuicide (pid);

  }

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Reinstalled Windows 7 Home Premium on your friends computer and impossible to activate

  So a while a friend died and I got his laptop. It came as a Windows 7 Home premium, but he did not like Windows and it has switched to Linux. I switched it back to Windows, but I just use a disc of Windows 7 Home Premium, I already had, leading to a "non-genuine" version of Windows. It has been so for a while now and the message "Activate Windows now" slows down the initial start-up; I can't put a wallpaper I was just wondering if it is possible to get an another record since the original key is taken on a technical level. If it's useful, 'caught', original product key on the sticker of the laptop is {deleted}

  Original title: activation (?) Windows 7

  If you still have the sticker / product key that belongs to this laptop then try the following:

  (A) If you have used the Home Premium edition you drive "had", if it is a version of "Retail" (not a recovery from another PC disk) then:

  Open a prompt (run as administrator) and type the following at the command prompt:

  slmgr - upk (press the Enter key)

  slmgr - ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX (where XXXXX is your product key and press the Enter key

  slmgr - ato (and press the Enter key)

  Leave command prompt it a check to see if Windows is activated.

  (B) If you used a Home Premium recovery disc that belongs to another PC, you should reinstall Windows and activate using the product key that belonged to your laptop from a friend.

  (1) download the Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  SHA1 hash: 6071B4553FCF0EA53D589A846B5AE76743DD68FC
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
  SHA1 hash: 6C9058389C1E2E5122B7C933275F963EDF1C07B9

  (2) after downloading the correct .iso file install HashCalc and validate the SHA1 hash value
  is correct.
  HashCalc: http://www.slavasoft.com/hashcalc/index.htm
  (Note: If the download is not corrupted, HashCalc value returns will correspond to the value of SHA1 I posted)

  (3) then use ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During the grace period, you can install your device drivers,
  run Windows updates and solve other problems or issues.
  Once you are satisfied everything is working properly, and then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available.

  Make a small group (10 updates to max at a time) of the updates at a time,
  reboot if prompted and install another small group of updates and so on.
  registration of .NET Framework updates for the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• How can I reinstall Windows 7 Home premium on my MSI FX600 OA if the recovery partition does not work?

  So, I bought this laptop MSI FX600. It had Windows 7 Home premium OA (OEM I guess). It also contains a recovery partition.

  After awhile, I had to reinstall windows, so I downloaded an iso of windows, put it on a USB key and reinstalled. but the product key doesn't work though I should be able to use it because it is not used by any other computer. How can I reinstall windows and activate with the product key OEM on the bottom of the laptop? somehow the recovery partition no longer works, so that will not help either. Also, where can I download the iso right for reassembly?

  too bad that I already fixed it. I installed the version English, but anyway my laptop only supports the Dutch version. Thank you for your abundant answers.

• Minimum requirements for Windows Vista Home Premium - download & installation

  I need to install Adobe Acrobat X Pro for windows on my laptop and my operating system is Windows Vista Home Premium but I can not because the system tells me that I can't due to not meeting minimum requirements. What can I do to upgrade my system so that the program can be executed and be installed thanks?

  Acrobat X Pro system requirements

  Windows

  • 1.3 GHz or faster processor
  • Microsoft Windows XP Home Edition, professional, or Tablet-PC Edition with Service Pack 3 (32 bit) or Service Pack 2 (64-bit); Windows Server 2003 (32-bit and 64-bit; (Service Pack 2 required for 64-bit); Windows Server 2008 or 2008 R2 (32-bit and 64-bit); Windows Vista® Home Basic, Home Premium, Business, Ultimate, or enterprise with Service Pack 2 (32-bit and 64-bit); Windows 7 Starter, Home Premium, professional, Ultimate or Enterprise (32-bit and 64-bit)
  • 512 MB RAM (1 GB recommended)
  • 1.9 GB of available disk space
  • screen resolution of 1024 x 576
  • DVD-ROM drive
  • Microsoft Internet Explorer 7 or 8; Firefox 3.5 or 3.6
  • Video hardware acceleration (optional)

  Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.