laptop HP Pavilion g7: pc does not start correctly and wiped the system administrator account

Similar Questions

• Pavilion G62: PC does not start correctly

  After I installed Win10 my laptop does not completely start unless I have remove the power and battery, then reconnect them. If I don't do it, the laptop is blocked at the HP logo before Windows starts. I think it has something to do with the HP does not close completely.  When I turned off the laptop, it takes about a minute for the power light turn off.

  Hello LJ44,.

  I suggest you run Windows Update once on the device.

  Like Windows 10 drivers will be available through Windows Update.

  Windows Update will fix this problem.

  I am an employee of HP, the views expressed here are my personal opinions, not HP.

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the left side of my post to say thank you! ***

• ASM does not start after you restart the system.

  OS = Linux 5
  Grid = 11 GR 2
  
  I've successfully installed grid for a stand-alone server. However, after I restarted the server and commissioning upward the clusterware (crsctl start has), I got the following error message when you try to start ASM
  
  sqlplus / as sysasm
  SQL > startup
  ORA-27154: post/wait create failed
  ORA-27300: OS dependent operating system: semget failed with status: 28
  ORA-27301: OS error: no space is available on the device
  ORA-27302: an error occurred at: sskgpsemsper

  kernel semaphore seems insufficient, increase last kernel.sem value in /etc/sysctl.conf and try to run to the top of the DSO.

  REF the link to follow the steps below:

  http://blog.ronnyegner-consulting.de/2011/04/11/ora-27154-postwait-create-failed-ora-27301-OS-failure-message-no-space-left-on-device-when-starting-ASM-or-database-instance/

• I think someone is hacking my visit Web sites and IP address. Some sites do not open. When I try to open mozilla 1 message is displayed indicating that a single firefox is open and does not first close and reboot the system.

  At present 2 sites not open. When I am trying to open these sites to be ' problem loading page or the Web site you are looking for does not appear. These two messages are displayed.

  Try to clear your browser's cache.

  Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• Does not start some windows services "the system does not have the specified path.

  

  I can't start some programs for some reason any D:

  If this is a recent problem and then system restore must repair.

  If you are experienced with maintenance of Windows, you must consider these details of registry:

  

  If you have no experience at this level, then you will need to ask a computer-savvy friend to help you, or have the service machine. Note that also snippingtool.exe is a much better tool to take screenshots that the method used.

• Windows does not start. Stuck on the WIndows logo or a black screen United

  Original title: BOOT ERROR

  It's been 6 days since my computer is having this problem.i spin asrock pc.the problem is when I restart my computer it doesn't not load some time the screen appears black and sometimes windows logo appears faintly.and when I restart once more, he sows me windows error message it says windows does not start correctly and give me options to start , they start windows normally, sfafe mode, last known good... etc.when I chose an option and start same happens.but when I turned off my pc and wait a minute and start windows boot normally without a problem.is this because of my startup file or something else?

  No, you can't.

  If you have a true bootable XP with SP1 or SP2 installation CD, you can create a new installation CD with SP3 integrated using a process called "slipstreaming".

  It is a pleasure to the project for a day and there are several methods, you can read on the Internet, such as BleepingComputer:

  http://www.bleepingcomputer.com/tutorials/tutorial154.html

  If you want to use the Recovery Console and is not a real XP bootable installation CD or are not sure what you have, simply create a bootable XP Recovery CD of Console yourself (without XP media required)

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• HP Pavilion dv7t-3000 does not start

  My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674

  According to who, the error condition is: 'non-functional CPU.

  So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?

  Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.

• Pavilion G6-1b59wm does not start

  Nice day.. I have a G6 Pavilion that does not start when you push the power button. I tried it on battery only and with the power supply cord is plugged in. And yet nothing.

  Here's what I see: when the power supply cord is plugged in, the power supply next to the port light is white. I press the power button it flashes white momentarily (and it flashes F12). Nothing else happens. No other led lite, the screen remains black.

  Diagnosis steps followed:

  1. the battery was removed, and unplugged. Start button / stop for 30 seconds and reconnected. Nothing.

  2. battery removed and plugged into the wall. Start button / down stop and nothing.

  3 tried a different power cord, different battery... nothing

  4 removed boards from the RAM, button / Stop button... nothing

  5 deleted from the hard disk (RAM yet uninstalled), button / Stop button... nothing

  Any other suggestions?

  This should help you locate:

  http://WWW8.HP.com/us/en/store-finder/index.do

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• Mac does not start correctly

  Hello, my Imac does not start correctly. When he plays the macsound boots but only half of the load of the boot. Then it restarts.

  What I have done:

  (1) unplug everything and held the power button for 10 seconds.

  (2) held the shift key--> after that I have a few bluish vertical lines

  (3) held cmd + option + P + R-> after I have a few vertical lines bluish, but bigger

  (4) held the c key

  (5) very slow D

  (6) CMD + V-> it's fast to read and to search for errors

  After all these different things, randomly I these bluish vertical lines and sometimes a few flickers on my screen.

  Can someone help me?

  If I need to reinstall I can recover my data?

  I appreciate your help and thanks for your help.

  I solved the problem! I googled a lot and I found that it was the GPU was down. Well, I searched and found the solution...

  I think that apple don't want to hear or see. But if you are a little technical or handyman, Cook your GPU in the oven. Yes, bake your GPU in the oven! See the link: https://www.youtube.com/watch?v=9vPM41ZmLos

  I warn you all, be very patient and very carefully, or you can destroy your beloved mac. The case may go to an apple store workshop.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• I thought that if I want my machine to boot faster I can move the fonts of the lokal disk documents folder so it does not start them all at the start

  original title: Fonts folder

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

  Don't listen to anyone who has you said that.
   
  The best way to speed up your computer is to eliminate startup items which are unnecessarily run at startup.  Go to start | Search and type msconfig and then see what is running at startup and what other services are underway then as well.  You can eliminate selectively and then evaluate how fast your computer runs.
   
  Steve
   
   
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!