Laptop HP pavilion game 15: stop light stays on for about 15 seconds after stopping

I have an SSD M.2, when I stop the pc through windows, the power light stays on for about 15 seconds, the laptop does not turn off, but it is strange that the light stays on.

the problem and do not receive any documented

any advice would be appreciated

Hello

It is normal, in many cases, your charger light will stay longer when you turn off your machine from the wall.

Kind regards.

Tags: Notebooks

Similar Questions

  • Satego X 200 - 21u + Win7: freeze all playing a game for about 20 seconds

    Hello

    installed win7 a few weeks ago and I need help.

    as long as I have used default displays the drivers of toshiba (~ 1 year) windows7 tends to freeze while playing a game for about 20 seconds, and everything goes normal again.

    After searching the internal pool, I discovered that most recent nvidia driver could solve this problem, so I downloaded the latest drivers for your laptop from there. now windows freezes over, but rather a huge amount of pixels displayed for fractions of seconds. could someone help me? is it possible that toshiba will bring display drivers compatible win7?

    What are the changes accurate toshiba brings to their drivers? I cannot repeat this manual?

    * edit *.

    SRY for the bad language :).

    using the version of 32-bit win7

    Hi mate,

    The point is that you should only use the Toshiba display drivers directly because are pre-tested on the on the laptop. Other drivers don't have overheating protection, which means that you can display errors and damage to the graphics card. So I advise to use Toshiba display drivers.

    I don t know the difference between display drivers, you should ask this Toshiba directly and not here in the forum of the user.

    Maybe there is another solution for your problem like cleaning your laptop with a jet of compressed air. This could blow out the dust from the cooling fans.

  • When opening my e-mail address, the E-mail entire table up and down for about 5 seconds. Because of the motion, I opened that badly. How to stop this movement?

    I use ASUS computer laptop and windows 7. When I opened my e-mail, the whole e-mail message table continues to move vertically for about 5 seconds and would then become immobile. Then only I can select a message and open. When I'm done with the reading of a message, and close it, it goes up and down motion again. Because of this instability, sometimes I open or delete the wrong message. What is the problem, can anyone help?

    First of all, update Firefox 16.0.1. Update Firefox to the latest version

    Then, try to read Web sites look bad or appear differently than they should and Refresh Firefox – reset settings and Add-ons. This could be just pictures of loading slowly, you have a slower internet connection with this computer?

  • On turning on my laptop that I keep seeing a black screen for about 20 seconds.

    So, I got a few problems of starting time. On turning on my laptop that I keep seeing a black screen for about 20 seconds. Seeing a few forums I have seen that this should not take more than 5 seconds. I have a dell Inspiron 15 3537. Please help. "

    Hello

    Please download CCleaner here and when it is installed, open it, appointment on the 'clean' tab, leave all the boxes even and click run while cleaning.

    When you have done this, go to the 'Tools' tab, select uninstall and bottom right, select Save to text file, select a file name for it, and then open the saved document. Send the contents of it in your next reply.

    It is possible that it is caused by corrupted files. You can try to run the System File Check to check (and challenge!) corrupted files.

    Use the System File Checker tool to repair missing or corrupted system files.
    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    You can also have a third-party application installed on your computer that is the cause, so try to perform a clean boot Mode, which is executed at Windows startup, by using a minimal set of drivers and startup programs.

    How to make a Windows-specific Startup Mode.
    http://support.Microsoft.com/kb/929135

    It is also advisable to run a scan with Malwarebytes Anti-Malware to check all infections.

    Thank you.

  • When I start installation Creative Cloud App it starts for about 10 seconds and then initializing bar disappears and the download stops

    When I start installation Creative Cloud App, it starts in about 10 seconds, then the initializing bar disappears and the download stops, anyone have any ideas?

    Jennifer,

    Please try the steps listed in error: "unable to install". Creative Cloud Desktop to reinstall the creative Cloud Desktop application

    You can also see these links:

    Creative Cloud App Installer disappears after "initializing Setup" without having to download (Windows)

    Installer of creative cloud disappears  (Mac)

    Guinot

  • When I log on my monitor only stays on for a few seconds and then goes black. need to turn the screen off and on several times before it lights.

    fact it for about a week now.  have ran antivirus scans and asked a lot of people who were not able to help me at the moment.

    It looks like a hardware problem.  Your monitor, cable or even the video card in your computer goes wrong.  My bet is on the screen.  Try to swap the monitor with another computer and see if the problem follows the monitor or the computer.

    HTH,
    JW

  • HP Envy Touch: Sound only works for about 1 hour after I restart. Then suddenly stops.

    Product: HP ENVY Sleekbook 4 t-1000 CTO

    Model: KD1A99UA #ABA

    Operating system: Windows 7

    When I restart my computer, my sound works for an hour or two and then suddenyl turns off. It does this with or without a helmet. It works again as soon as I restart the computer, but I would really do not have to restart my computer every hour just to get the sound to work.

    Also-download of Windows 8 is not an option because a large part of my work is incompatiable with windows 8

    Hello

    Try the following.

    Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

    Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

    After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

    Recovery Manager - Windows 8.

    If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

    Restart the laptop.

    Kind regards

    DP - K

  • Pavilion Elite m9500y: indicator light does not illuminate

    Start button / stop is pushed to market, the fans begin to turn, but the power button the led does not light (usually blue when on, orange when it is idle), and nothing appears on the monitor (which goes to sleep). Computer is around 3 years. Any ideas?

    Try a reset, works "sometimes". Unplug the appliance, the power button for about 30 seconds. Reconnect the power cord and see if any difference.

  • Hi I bought new laptop HP Pavilion DM1-2009AU

    Hello, I'm looking for hardware & software for this laptop HP Pavilion DM1-2009AU please try to look for me, its hard for me to watch all the region and support page. my name is XC595PA #AB5

    Thank you..

    Hello

    Here you will find all the latest drivers and software.

  • Ethernet light stays on even when DV7 series laptop has stopped

    Product: HP Pavilion DV7-7008tx

    OS: Windows 7 64-bit

    Question: When I turned off my laptop and leave the ethernet cable is connected, the ethernet light stays on. Remove the cable turns the light off, but put it back brings light on.

    It's supposed to happen, or there at - it a way to stop this?

    Thank you!

    You have the Setup "Wake on Lan" in the BIOs? The function to the computer be awakened my network entries. You will need to start in the BIO to disable this feature. You may be able to disable this feature in Windows 7 as well. Here is a good article on how to enable/disable the wake on LAN feature: Wake - on - Lan (WOL) for Windows 7 Made Easy!

    I hope this helps!

    Sean

  • Pavilion 15 p-018tu: laptop HP with windows 10 stop problem

    My HP laptop is Pavilion 15 p-018tu with windows pre-installed 8.1 unilingual. I've updated to windows 10 about a month ago. Now, my laptop is not properly blocking down. The screen goes black but the power button light turns on for a long time and it lights never out. Whenever I had to press and hold the power button to stop it. I found on the internet that downgraded to management engine intel version 9.5 will work, but my engine management intel is version 9.5. Now what to do? Is there a permanent solution?

    Hello

    Thanks for posting in the HP Support forum. Welcome!

    I just checked and I see that your computer (this model) does not officially support Windows 10, meaning never officially exit HP Win 10 drivers for this device. http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/5355006/model/5393349

    It is made in the implementation and tested with Windows 7 or 8/8.1.

    I recommend that return you to Windows 8.1 (your previous version of Win) in order to solve this problem and to have a fully supported features.

    If you upgraded to Win 10 less than a month ago, you can use the built-in options to return to the old version of Windows, as explained here > > http://www.howtogeek.com/220723/how-to-uninstall-windows-10-and-downgrade-to-windows-7-or-8.1/

    If you upgraded to Win 10 more than a month ago, you will need to perform a system recovery to factory default state HP recovery. More information:

    > > http://support.hp.com/us-en/document/c04758961#AbT9 and

    > > http://support.hp.com/us-en/document/c04758961

    Windows 8.1 is the right operating system and will be well supported by Microsoft until 2023.

    Before making a drop of ratings, please backup your important files on an external device to cover yourself / your information / against potential incidents.

  • My pavilion dv2418nr wireless light stays orange

    My pavilion dv2418nr wireless light stays orange, you don't go to the Blue will not recognize the connections surrounding neighborhood.  ISP says that the router is fine, this is the switch of the laptop not allowing the card read wireless connections. HP tech told me plug Ethernet from the router to the laptop... I got on the internet very well... but it isn't a hard connect.  Anyone had this problem with their switch?  I think that until this little light turns blue, I have better luck.  Thanks for your help

    Hello

    Try a Hard Reset as follows.

    Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad.

    Kind regards

    DP - K

    

  • S5-1224 blue power light stays on after stopping; What happened to the orange light "sleep"?

    I have a Slimline Paviliion S5 - 1224.  No changes or additions were made to the material.  When I stop the machine, it is used to change the orange or the wide power led.  Now, the blue power light stays on and blinks after power off the power.  The light on the adapter bluetooth in the front USB port stays on, too.  After removing the USB BT adapter, the light on the adapter goes off, indicating that the power is off to this USB port.  But PC power light blue is not far away, even when it is disconnected from the wall outlet.  It's as if the machine is haunted.  I unplugged the decision-making and the left that it disconnected for more than a week, but the blue light on the front of the machine never went out and is still on, even if she wavers and seems to fade a little.  When I turned on the rear, the light back to him is normal on State 'blue '.  Power off, blue light stays on.  Disconnected from the plug, light blue stays on.  I'm afraid to leave this thing in the House and will probably trash if someone does not have a solution.  Anyone who has ever seen anything like that?  All my friends of teckie IT are puzzled and suggested I post here to see if anyone else had the same problem.  Don't bother taking repair.

    UPDATE: I removed all devices and low and behold, when I unplugged my BluRay USB drive, the lights are all on the CPU.  I restarted, close, tried to sleep and Hibernate and everything works fine now.  I guess that the BluRay player was watching somehow the CPU to turn it off.  It is a unit that is known for needing a huge amount of energy to function properly.  Naturally, the Blu - Ray player is not get reconnected to this HP PC.   Now I use with my Mac.

  • Bought 5 sets of laptop HP Pavilion G4. I can create recovery disc 1 game...

    Just bought 5 sets of laptop HP Pavilion G4. Can I create 1 1 of the laptop recovery disk and use it for all?

    Also or I can clone the recovery partition in a laptop and use it to others.

    Please advice.

    Hello

    As long as all laptops have the same recovery Nr discs created on a machines work on others (although it may be wise to create 2 games just to guard against a disc is lost etc).

    Kind regards

    DP - K

  • On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside. When on this subject that is supposed to be a white light showing that it is on. How can I fix it? It happened when I upgraded to Windows 7 from Vis

    On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside.  When on this subject that is supposed to be a white light showing that it is on.  How can I fix it?  It happened when I upgraded to Windows 7 from Vista.  Help, please?

    Windows Update has nothing to do with the upgrade of Windows. Try posting in one of these specific forums Win7:

    http://social.answers.Microsoft.com/forums/en-us/w7install/threads

    http://social.answers.Microsoft.com/forums/en-us/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for