laptop HP Pavilion... How to insert a CD in my laptop

Similar Questions

• Satellite P200-1FZ: how to insert the smart media card into the card slot

  Hello

  I have read the slim manual, and I can't find any info on the card slot. (other than where he lives on the laptop)

  Could someone tell me please how to insert my card SmartMedia? the slot is huge and I'm worried about losing the card inside the laptop! I assume that the smart media will be automatically run?...

  Thanks in advance!

  It would be good to know what model of laptop you have.
  But, normally, for the smaller cards, you will need an adapter that is often included, as for the memory stick pro duo.
  I think it's just normal size and you have to put in the middle of the card reader slot until you hear a click.

  If you have not changed the AutoPlay settings, you must get a new window with the files on your card, when you put it on your laptop.

• How to insert a page in a section, but NOT like the last page?

  How to insert a page in a section, but NOT like the last page?

  and how to integrate fonts in a pdf export?

  How does choose a 5.5 x 8.5 book format?

  Adding pages to get to the end.  You can, however, keep typing to the point you need to add a page. Once the page seems to make corrections.

• I can't understand how to insert an internet link in my outgoing mail.

  I like Thunderbird but somehow I can not understand how to insert an internet link in my outgoing mail. But if my correspondent responds and sends my E-mail again to me, the link became operational.

  Links and email addresses are not active in the composition window. During that long and you type correctly, they will be active when sending. You can save the message in drafts and see it become active or send it to yourself as a test.

• How to insert special characters when I hit e-mail or Facebook?

  How to insert special characters when I hit e-mail or Facebook?

  See also:

  • ABC Tajpu: https://addons.mozilla.org/firefox/addon/abctajpu/

• How to insert Date and time in video

  Hello

  I wonder how to insert the Date and time in video files during their transfer to PC with my Handycam(DCR-SR82).

  Thank you

  Frank

  The date and time does not appear during recording, however they are saved automatically by the display system during playback. The camcorder can not burn in the video, but once you have on your computer, third-party software can do for you.

• How to insert a watermark in the picture before editing or printing?

  How to insert a watermark before editing or photo printing.

  Thank you for your help.

  Howdy chanval,

  Thank you for using communities Support from Apple.

  I see that you want to add a watermark to your photos on your Mac.  Take a look at the post recommended Apple in the link below for app ideas that should have this ability.

  How can I sign my photos of author?

  Take care.

• How to insert as an entry within the formula variable, the total time on the scope window?

  How to insert, as an entry within the formula variable, the window of total time on the scope (i.e. of 20ms/div x 10 div = 200ms)?

  HERE'S A SAMPLE QUESTION:
  

  FORMULA FOR INTEGRAL ACTION:

  STATISTICS:

  Input variable: DPO4034 (CH1);

  Box: number of samples.

  FORMULA

  Input variable 0: DPO4034 (CH1); alias: x 0

  Input variable 1: 'time window Total out of scope?. " alias: x 1

  Input variable 2: number of samples (CH1); alias: x 2

  Under the operation Configuration: formula

  Y = (x 0 ^ 2) *(x1/x2)

  Output: Data 1 (CH1)

  THEN, WITH THE HELP OF STATISTICS:

  Input signal: data processing 1 (CH1)

  Checkbox: SUM

  Output: CH1 integral Action [has ^ 2s].

  
  

• How to insert a scatter diagram in MS word

  Does anyone know how to insert a diagram of dispersion in a MS word document?  I'm developing an application using c# and Measurement Studio and my request is a report in MS word.  I just need to add a diagram of dispersion in the same document.

  Thank you

  Yajai

  Hey DrObb,

  I have found some resources that I think should answer your question. First of all, the ScatterGraph class includes a ToFile() method that writes an image of the chart to a file: http://zone.ni.com/reference/en-XX/help/372636F-01/mstudiowebhelp/html/7a3e2b67/

  And I also found this post on the forum that does exactly what you ask (save a scattergraph to a Word document). See Tanya_V post here: http://forums.ni.com/t5/Measurement-Studio-for-NET/How-to-copy-an-image-to-a-file/m-p/1287058#M10443

  I hope this helps answer your question and please let us know if you need help more after checking these links!

• How to insert a step to give the position?

  Hello

  I have the sequence with the Select Case structure and to insert steps within the business end. How to do this? I found the index step can be readable by the TS_SequenceGetStepIndex (SequenceHandle, & errorInfo, szTestType, TS_StepGroup_Main, & val), but how to insert new step after, for example the case? For the function TS_SequenceInsertStep (SequenceHandle, & errorInfo, view, iNumofSteps, TS_StepGroup_Main) is not available index (iNumofSteps sucks and does not work as an index of the step and cannot be applied to the order of insertion of the steps (first step on start or end)).

  Currently, I create all (Select, case, end and the steps that need to be in the end case), but if the basic structure can be a default (including case select this option, etc.), only content must be updated, not all construction.

  (LabWindows/CVI coding)

  Best regards

  branar

  Hi all

  Yes, it was the right solution. Only thing, it's that need to take iNumofSteps for the front step and if you want to insert the new stage (or stages), this index should be increased by 1.

  error = TS_SequenceGetStepIndex (SequenceHandle, &errorInfo, "TuningTimeAfterLNA", TS_StepGroup_Main, &val);
                  iNumofSteps=val+1;
                      //add
                      tsErrChkMsgPopup( TS_EngineNewStep (EngineHandle, &errorInfo, "", "Label", &actionStep));
                      tsErrChkMsgPopup( TS_StepSetName ( actionStep, NULL, szTestType));
                      tsErrChkMsgPopup( TS_SequenceInsertStep ( SequenceHandle, &errorInfo, actionStep, iNumofSteps, TS_StepGroup_Main ));
  

  Best regards

  branar

• How to insert the image in the browser IMAQ instructions

  Hello

  How to insert multiple images in the browser of the IMAQ insert vi. will be taken to image in the folder.

  
  

• How to insert images as .jpg... gif attach file in email without any accessories

  Hi, this is Terry

  I would to know how to insert images on the part of email without an attachmenk.

  Thank you

  Tanveer Rauf

  An inserted picture is an attachment.  The embedded image is sent as an attachment and then it is returned in the message in an HTML message, but it is still an attachment to the message.

  In Outlook Express, you can embed a picture compose a new message in HTML then using Insert | Photo.  Who will integrate the image in the email, but it always comes as an image as an attachment.  It's just the way OE manages which shows as embedded.

  Alternatively, you can just link to an image by referencing a URL to the image on a website and this way no image will actually be embedded or attached.

  Steve

• How to insert an image in Wordpad?

  Anyone have any suggestions on how to insert an image in Wordpad?

  Thanks in advance for your suggestions

  Hello

  I don't think we can save images in formats RTF...

  What you can do is insert an object (file select Jpg) and fix it with the RTF (Wordpad) documents. Correct me if I'm wrong...

  * I tried to open the RTF (Wordpad files) daughter in MS Word and insert an image, it will save, but not from Wordpad.

  I hope this helps.

• Extra glossy II how to insert?

  Canon gave me a glossy II, but I don't know how to insert it. I tried A5, but fails to catch him.

  The box in he came is not size?

  You can always measure and use dimensions to find the approiate size.

• How to insert a screen shot in a Post

  How to insert a screen shot in a Post

  You must be registered and logged into the forum.

  These instructions assume that you know how to do a screen shot. (Use the tool capturesWindows, or if you do not have this press Fn + Prnt Scrn application then open Windows Paint and paste (Ctrl + V) inside, then "Save as" a jpeg or png file).

  1. when you make a post, you are either going to start a new thread or you are replying to someone.

  If you start a new thread, click on the button "new message" at the top of any page on the forum.

  

  If you are replying to a message in an existing thread, click "answer."

  

  2 to begin the insertion the screenshot, click on the button "Insert an Image". If you have difficulties to identify, compare the yellow Smiley face then go 7 buttons to the left.

  

  3. in the next screen

  1. Select "Computer" in the drop-down list, if the image is on your computer.

  2. click the "Browse" button and navigate to where you saved the screenshot. Click on the name of the file.

  3. wait a moment so that the file uploads - when he has finished you will see the words "Uploaded".

  4. click on the button "insert." [You don't need to modify the 'Dimensions'.] The image now appears in your post everywhere where the cursor was.

  

  4 you can use the same method to insert other images in addition to screenshots. You can change the apparent size of the image after it has been inserted in the message by clicking and dragging the handles.

  

  Please do not answer in this thread that is a FAQ.

  If you have any comments or questions, please start a new thread or shoot me a private message.

  Thanks, I appreciate it.

• How to insert a script in an HTML document.

  How to insert a script in an HTML document.

  Abd there is always done on the fly, of course...

  e.g. Dynamic insertion of webworks

  var bbww = document.createElement("script");
  bbww.src='local:///chrome/webworks.js';
  bbww.type = 'text/javascript';
  document.getElementsByTagName('head')[0].appendChild(bbww); // Inject webworks