Laptop HP Touchsmart 15-D020: how to remove and replace the keyboard on laptop HP Touchsmart 15-D020NR

Similar Questions

• Satellite A30 921: how to remove and replace the memory?

  Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.

  Thank you in advance.

  Hello

  There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5

  Good bye

• Steps to remove and replace the keyboard. HP Pavilion dv7-1448dx

  Hello. I have HP Pavilion dv7-1448dx. I have not available a manual where the path is directed to change the laptop keyboard. I need help to get the steps to remove and replace the keyboard. Please provide me with the support as soon as possible so that I can solve this problem. Thank you.

  Link to the .pdf manual

  Click above. We are not HP, all other users trying to help.

• How to remove and replace the internal Blu - Ray DVD RW drive on laptop HP HDX 16 t

  The internal dvd player does not work and I would like to remove and replace it myself. If anyone has a method step by step for me, or links to pictures or videos of the steps, I'd appreciate it. Thank you

  RayCE

  There is a screw on the bottom of the laptop that holds the drive in the screw about 4 inches from the front of the dvd player door.on the botom of the machine, remove the screw and remove the disc.

• How to remove and replace the missing keys Sat A30

  Hey folk,
  I guess that sounds simple, but I have just no idea.
  Broke and need to replace a couple of keys on my keyboard UK A30. At present, all what I have in place are the rubber bubble popper & locators of metal set in the empty spaces.
  The keys in question are the shift (I have no u lying in spring form) and? + / keys of RHS of KB.

  I have complete German and American replacement KBs, but to remove the necessary keys on the part and repair the United Kingdom KB.

  I don't want to end up with 3 broken KBs

  So I need clear and detailed instructions on removal and then reset the necessary keys.

  Any help or direction to the site that contains this kind of info would be greatly appreciated. Or response message directly by email to

  [email protected]

  Thank you very much.
  sparkiefive

  Hello

  I think you should go to a Toshiba Service partner.

  You can find them here:
  https://EU.computers.Toshiba-Europe.com
  Downloads support & - find an approved service

• How to remove and replace the hard drive on a desktop Pavilion m9350f computer?

  not boot BIOS says search for device.  . Suspect problem is intermittent

  ShortTimer,

  I was trying to be polite and doesn't cause any anxiety. I asked if the BIOS can 'see' the hard drive and DVD player. (Forget the PMD, USB).

  As your motherboard is a M2N78 - LA. There was a race of (IMHO) production of chips from NVidia controller that were defective. Only this can explain the success or Miss boards failed in these units:

  This series of motherboard has been installed in many different models of HP computers. There are problems.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see/TD-p/181716

  Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.

  a4316f

  e9140f

  p5210y

  p6130y

  p6142p

  p6157c

  p6210f

  p6210y

  p6214c

  p6310y

  p6320y

  a6720y

  m8530f

  m9120y

  m9350f

  m9517c

  m9530f

  m9840sc

• How to remove and delete the in computer HP recovery Partition.

  Hello

  How to remove and delete the Partition Recovery on HP computer after I installed win 7 (clean install) befor was Vista?

  Thank you

  
  

• G61 does not illuminate unless I have remove and replace the battery.

  Even when the power cord plugged in it will not light. If I remove and replace the battery it lights mode battery and AC. At the same time my HP Support Advisor and HP s Advisor "stopped working".

  I restore to a previous point, no help. Downloaded a new HP advisor, ho help.

  This happened after the recent big WIN7 updated. Help

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K

• Want desolde/resolder, remove and replace the two damaged usb2 ports

  I have a Sat A30 perfect by all means other than 2 USB2 ports on the back that are damaged (black plastic seperaters between connectors jumped) not quite sure why this happened because I was simply unplug the connected usb plugs on both occasions.

  The connectors were not especially tight. fault is I have no insulation between copper connectors which are still found in the slots and causes a short circuit, when I plug in a usb device.

  I bought a card mother relpacement (damaged) and usb2 connections are OK! Have good technician experience in carring out Soldering/desoldering and has all the tools. Problem is that I have not the slightest idea what connections under the Board of Directors are required to unsolder my damaged usb2 card in order to remove/swop and perform the necessary replacement.

  I'm sure I'll be advised to contact an authorized reseller of Tosh. I tried this and they say that they will be already only the motherboard together and the cost is horrible. I would rather make the repair myself that's not rocket science.

  The techies out there who could counsel with picture of the relevent pins to desoldering in order to remove and repair the fault would be greatly appreciated.

  E-mail: [email protected]

  If you can help in any way or point me in the right direction to go repair.

  I hope someone can help. Thank you very much
  Stewart

  Hello

  Please don't be crazy about me, but in my opinion, is not a very good idea to open the notebook alone if you don't have a lot of experience with it. Laptops are designed on the specific way and exchange of material is not so easy as the exchange of material to work stations.

  Believe me that a small error in the assembly/disassembly procedure can case damage to equipment or the façade of the same laptop parts. I know that there's not much service partner assistance because they want to do. It costs money, but you must understand that if they give that kind of advice or information they may close the shop very soon.

  You can try to do it alone, but at your own risk and be careful.

• HOW TO REMOVE AND REINSTALL THE OFFICEJET PRO 8500 910 PRINTHEAD

  HP OFFICEJET 8500 910 PRINT HEAD ALIGNMENT FAILED. HOW TO REMOVE & REPLACE THE PRINT HEAD. I READ THE USER GUIDE THAT SAYS LIFT TOP AND THEN LIFT THE PRINTHEAD. UNFORTUNATELY WE YOU SAID NOT HOW TO PROCEED. I OBVIOUSLY DON'T WANT THE LID ON THE GLASS... THE PHOTO SHOWS TOP RAISED COVER AND ACCESS THE PRINT HEAD. HE DIDN'T THERE HAS NO ACCESS TO THE PRINTHEAD WITH THE LID RAISED!

  Hello

  Please click http://support.hp.com/us-en/document/c02257580 to access the procedure which should solve the problem.

  Please refer to two Solution.

• How to remove and reset the Contacts folder / files in Vista Windows Mail

  How can I delete the Contacts in Vista - and actually reset the folder so that windows treats the files ".contact" as - good contact and no text.

  Because what was going on, I decided to try to start from scratch - I just copied all the files in the folder of contacts to a archive and deleted all the files in the contacts folder.

  From Windows Mail - I am capable of was able to use the tool 'Add to contacts' and the Contact form (properties) dialog happens - but if I open the Contacts folder directly (Windows or Windows Mail 'button'), I get a window of the typical Explorer with a newlt created contact list (for example there are 6 in there now all created from Windows Mail) - if I try to open an existing contact - it opens in the Notepad - text - garbage.  (Same problem I had)

  I've been setting up with a Contacts folder corrupted since I bought my desktop with Vista in 2008 - I think I looked into the question of import then and there is no function of CSV to import the contacts (that I could find) - and / or the inport corrupted the file - so when I open a file of contacts I get the text of the file - it opens in Notepad - and not a Contact form.

  With more than 600 contacts in there, I didn't have to manually retype all data, but it's time to bite the bullet.

  Hello PaulJMoore,

  ·         Do you have just copied the contacts in archive and did not export them?

  ·         What is the extension of the contact files you copied?

  You should try to reset the contacts folder.

  1. in Windows Explorer, navigate to the folder C:\Users\(user name) \Contacts.

  2. right click on an empty space in the main pane of the middle of the window and click Customize this folder.

  3. under the type of folder do you want, click the arrow next to the model list drop-down list.

  4. click on Contacts to select.

  NOTE: Check apply also this template to all subfolders if you want to change all subfolders in the Contacts folder to the Contacts model as well.

  5. click on OK.

  The contacts created with Windows Vista are in the format of .vlc. When you try to open them to the archived location where you saved, he would not be able to access Windows Mail to open the contacts.

  First of all try to copy all the contacts in the Contacts folder on the \Contacts C:\Users\(user name folder location).

  If this does not work, try to import all the contacts that you have saved to the location that is archived using the import option from the Windows Messaging.

  You can read this article which will give you information on how to import contacts:

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-export-or-change-the-format-for-contacts

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove and hide the group header

  Hello

  I want to combine metadata fields and you want to give the name to the group. But I want to remove the skin on the page.

  Please provide inputs on how to achieve this.

  Thanks in advance

  You can set disableFieldGroupHeaders = 1 to completely hide the group header.

  To just remove the link to hide, you can set the following in a side effect of rule:

  <>

   

  '$>

  <$exec setresourceinclude("std_field_group_header_show_hide",="" std_field_group_header_show_hide)$="">

  Jonathan

  https://jonathanhult.com

• How to remove and restore the trash?

  My basket is damaged then, I need to remove it and then restore the trash.

  See http://www.kellys-korner-xp.com/xp_tweaks.htm - 64, straight line

  Read the instructions at the top of the page.

• How to remove and reinstall the CC bridge?

  I started the installation of the bridge the creative cloud CC and then tried to cancel to modify an installation.  My Creative cloud console now shows that CC bridge is installed, but it does not work.  Nor it is listed under programs and features, so I can't uninstall it (I'm running Windows 7).

  How can I I CC suggests that the CC bridge is not installed so I can install it?

  Thank you.

  Run the cleanup tool and try again:

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• Satellite S1900-101: how to open and replace the RAM?

  Hello
  I own a Toshiba Satellite S1900-101 (PS190E - 006 X 8 - 1N). I love my laptop, but'd like it even more if it had more RAM! A friend of mine gave me the following:

  Samsung M366S1723DTS, 128 MB, sync, 133 MHz, CL3

  PC133 SDRAM 128M

  MT8LSDT1664AG SG 128 MB 100 MHz CL2 Synch

  Can I use one of these in my Toshiba? If not, where should I expect?

  And how do I open my phone to join my free slots? (Without worrying about if above Rams work or not.) "I'm just curious!)

  Thank you very much!
  Sandra

  Hi guys

  I found a page very useful on [memory for Toshiba Satellite 1900 101 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5485&ft=m&st=3]

  This page confirms the details and the information published by SambaDeAmigo
  The laptop can be upgraded only to 768 MB because it has an internal memory of 256 MB, which is NOT removable. So only ONE slot is expandable.
  This slots would support the SODIMM PC133 144 pins

  Concerning