laptop is not put into hibernation after "standby mode"

Similar Questions

• My laptop is not put into hibernation

  I get the message Alp your pointing device prevents the system to Hibernate. If the problem reoccur, so far the pilot.
  I try to update, but there is not available so far.
  I had the same problem on my previous Satellite.
  Any suggestion?

  Hello

  All drivers for Toshiba units, you can find on the official site.
  Visit this link:
  http://EU.computers.Toshiba-Europe.com then support & downloads

  Best regards

  Good bye

• Windows 8.1 is not put into hibernation or sleep after installing the catalyst amd driver

  Hi, I use windows 8.1 64-bit but after installing a windows amd catalyst center behavior changed it doesn't go to Hibernate and sleep and after unstall it windows comes in the normal position, please, refered me an adequate solution to install amd driver will detect all issue and also suggest me which version will be compatible with my device , I tried amd 14.9 and also 14.11 but does not resolve the issues I am curretnly using intel Version10.18.10.3325 windows update show me AMD wddi 1.3 pilot but he did not always do not install...

  HP pavilion-15 Notebook n037tx

  Core i5 4200U

  4 GB of ram

  fixed that problem by unstalling my driver intel and amd driver then upgraded my pc to search for updates of pilots automatiically in s windows update, and then I applied a corrective tool of windows now, so good...

• DV7-6199us is not put into hibernation when battery low - just died

  Some time in the last month or two, my laptop properly leave off when the battery is low.  It's supposed to the hibernation when the battery reaches 10%:

  

  It used to work properly, but now he dies suddenly (off, lose all my work) when the battery is at a level critical.  I don't know what level because he always catches me by surprise.

  I tried to change the critical levels to see if I could do to begin to pay attention, but that did not help.

  How can I get to Hibernate properly?

  Gary

  Hi garyfritz,

  At this point, we have done everything, but replace the battery. Noted that energy seems good but it is two years and the laptop will usually survive battery. Maybe it's time to get a new battery or leave it at the levels you set now.

  Thank you

• How to stop Windows 7 locking/sleep/put into hibernation after a long period of time.

  Hello!

  I used clocks on my computer for some time now. Since installing Windows 7, they fail every day because Windows will start in an inactive state.
  I tried on my laptop power options, never placing dim/off/or sleep. I have also ensured that it was not updated Windows restart my computer while I was sleeping. There is no screen saver not enabled either.
  Thank you very much for the help.

  1 under the settings you mention, there is a button Advancedoptions.  A click on it.  You will see several sections.  Go to sleep & expand it.  Never Hibernate after value.

  2 you seem to have already checked the screen saver - Control Panel, Customize, Screensaver [in the lower right corner of the window] - this must be set to none

• My new Yoga 2 13 "has not put into hibernation!

  Hi all

  I recently bought a Yoga 2 Windows 8.1, 8 GB of RAM, 256 GB SSD and I am almost happy with it. However, there are some irritating flaws that I can't fix. One of them is the absence of mode of hibernation, which I use on a daily basis, to avoid launch my favorite applications.

  When I click on the 'shutdown' icon, I volunteered with: Shutdown / sleep / Reboot, but no hibernation mode.

  How can I report this mode?

  Thanks in advance for any help!

  As with all PC of Windows 8, go here:

  Control Panel\All Control Panel Items\Power Options\System Settings

• my pc will not come not put into hibernation. It did once but the habit now. ____

  I have the monitor turns off in 1 minute.  hard drives off in 3 minutes.  keep in 3 minutes.  Hibernate in 5 minutes. BUT nothing happens

  Hard disks turn off, and should I enter stand-by in 3 minutes?

  If this is not the case, why not just have the monitor off when you want, and then the Hibernate in any time you want. See if it works.

  TaurArian [MVP] 2005-2011 - Update Services

• computer won't stay asleep or put into hibernation

  I have recently reinstalled Windows 7 on a desktop computer.  I used to leave it on all the time but now I want it to go to sleep or put into hibernation after a few minutes (and stay that way until we want to use it).  I tried to sleep, hibernate and hybrid sleep.  It will turn off, but in a few minutes he returned upward by itself.  Sometimes it seems to scroll, and down every few minutes.

  I read that USB devices can cause this, but only the mouse and keyboard are attached via the USB port.  There are two internal hard drives.

  A thought-

  Check the network and sharing Center

  Some settings of the map change

  A click with the right button on your network adapter

  Select Properties

  Select Configure, then power management

  and make sure that allow this device to wake the computer is not checked?

• My Satellite A100 would not be put into hibernation

  Hello

  My laptop would not be in hibernation when I activate in the windows toolbar.
  When I activate the hibernation it will normally, but when the monitor takes blue and says "prepare put into hibernation" the monitor or system do not shoutdown (turn off), why?

  Is that the same for the suspend mode.

  I did a survey on my laptop and see I mode hibernation is enabled in control panel > power Setings > Hibernation

  My laptop is a Satellite A100.

  Sorry for my English.

  Thanks a lott!

  Hey Buddy,

  Sometimes, these problems of hibernation / suspension are caused by some programs that can't be closed from vista. Or your toshiba powersaver works bad, maybe some settings have been
  badly configured through that-I-know-what program or something else.

  I suggest you first: when you try to hibernate/suspend, then try pressing CTRL-ALT-DEL to see what applications are STILL running. Try closing the applications in the order of
  see when the machine will be really placed in hibernation. If this doesn´t has helped you, then try reinstalling the powersave (first uninstall correctly your system) and give a few
  What feedback happening.

  Greetz

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP Professional, Media Center Edition 2005 SP3 will not automatically put into hibernation

  I have re-installed drivers quick resume technology drivers & Intel Graphics & Sound & all associated drivers. but not good.

  Computer will be manually Hibernate & come out of hibernation, but is not automatically updated in hibernation?

  I tried the recommendations of microsoft all the but not good?

  The Device Manager shows all devices OK?

  Performed a restore the registry of oem disc & now put into hibernation very well at the moment, I hope that it will last? only lasted for a few days? its now to return again. ?

  not a fan of the system restores, especially under xp, but if it did work at one point, what has changed on your system, since it worked?

  http://support.Microsoft.com/kb/306084

  This is for two versions below, then you should be good.  But again this could be a temporary solution to a problem.

  Microsoft Windows XP Professional

  Microsoft Windows XP Home Edition

• Tecra M5 - will not be in hibernation or standby to standard Select-Bay drive inserted

  My Tecra M5 passes not in standby or sleep mode when it is selected in the menu start/stop. This is only a problem when the standard Toshiba CD player is inserted in select Bay. Once removed, it will be put into hibernation. Certainly this isn't something you should do every time?
  Any ideas?

  I think that you are the first person who says something like that. Is the STRANGE empty when you try to use standby or Hibernation mode?

  In any case, it's really strange question. Certainly, something like that shouldn't happen. Have you noticed that since the first day? How long do you use your Tecra? Is there a similar situation when you use FN + F4 or FN + F3 keycombination?

• When I turn on the computer of mymy and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  Original title: IO error

  OK so I turn on my computer and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  I run an xp windows 2003-04. My computer does not start completely and if I click on debug or put end to the program there just restarts the computer. How can I solve this problem? and is it possible that I can update my software?

  You say that you can not even start in Safe Mode, so method 1 will not help you, method 2 will not help you and 3 method will not help you.

  I start in the XP Recovery Console and first run a chkdsk/r on the afflicted system, but since we don't know anything about your system, we will need more information.

  It is a shame that in the forums MS Answers, the first response to a new question is (or should be) a request for more information...  You are 5 days in your problem, and so for him it seems that you are not getting anywhere.  If the thread goes inactive for more than a few days, the response of the Microsoft Support Engineer will become the 'response' automatically because it has links to the KB articles.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Satellite U205 would not be put into hibernation

  When I select Hibernate in the shutdown options that the classic windows xp appears with "preparation for the hibernation" and the machine hangs.
  This also happens when I ask him to standby mode.

  The screen is blank but power remains on. I have to press the power button / stop for 5secs in both cases to kill the power to the machine.

  Recently installed new software or microsoft updates? 3rd party software can sometimes this kind of problems.

  I suggest you try the following:

  -Update your BIOS to the latest version and put everything in your default BIOS
  -update your entire system and reinstall the powersaver which must be downloaded from the toshiba driver download site
  -If this is not enough, reclaim your machine and update all

  If hibernation won´t work any try you´ve, then give please a few comments here and we will discuss more on this subject.

  Welcome them

• Computer will not be put into hibernation when I close the lid

  I have a problem with my laptop. It is a series of Toshiba C55. When I close the lid it will not be in hibernation, even if I set power options to do so. This happens not all the time, but it happens enough that it's boring. If I close the lid and it will not be in hibernation, which means that it is in danger of overheating if I put in my backpack. If I use the start menu, it just goes to the lock screen, that's what I suspect it is when I close the lid. Help on that would be great.

  Hello Michael,

  Please keep us updated on the status of the issue.

  I appreciate your time and your efforts.

  I suggest you to update BIOS and drivers from the chipset and check the issue.

  Please update the chipset drivers from this link:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/tc50157200c.exe

  Update the BIOS from this link:
  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/scf6v140.exe

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of the

  the settings are at your own risk.

  I hope this helps.

  Thank you