laptop loses connection w/web when sleep mode is activated.

Similar Questions

• laptop won't wake up from sleep mode

  laptop won't wake up from sleep mode

  Hello

  Here's the quickfix.

  Set the laptop to sleep instead of Hibernate. Portable computers may have problems with the Hibernate function. Here are the instructions to navigate:

  1. go in Classic view of Control Panel. (Ctrl + ESC, then type 'control' to quickly control panel access)

  2. double-click on the icon power options

  3. click on "change when the computer sleeps.

  4. click on "change power avancΘs."

  Go to the menu of sleep and

  value "Allow hybrid sleep": OFF

  * Set the parameter "Hibernate after": NEVER

  Note: You need to type the following in the field, what is not there drop down to select.

  This is most likely the issue and the resolution. However, here are a few other troubleshooting steps if you have any questions:

  Troubleshooting of the sleep mode function:

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Hope this helps,

  Steve <> Microsoft Partner

• All-in-one Officejet 4620 HP loses connection wireless network when it starts in mode 'sleep'

  My printer HP 4620 all-in-one wireless works fine until it enters mode "Eve".  Once it goes into sleep mode, it is not wake up if a print job is sent to it.  If I wake up it manually by pressing the power button flashing, she does still not print.  If I've completely put off and then on again, the print job that has been put on hold on my computer will start printing, but it's a huge pain and loss of time almost everytime I want to print.  I installed all available updates.  I also assigned a static IP address in an effort to correct this, but nothing helped.  I see that others have complained about this problem, but I see not that anyone has had success resolving this.  My operating system is Windows Vista.  I use a Sys-Link Wireless G Router.  Thank you.

  Ok.  My printer worked flawlessly for a few days, and I think I can declare the problem solved.  I think the problem started when I applied a HP recommended workaround for a different problem, that is, HPNetworkCommunicator.exe kept running and goes out 10-15 seconds, with the cursor displays activities whenever the program is running.  When I reversed this workaround solution, solve the problem wireless (but of course, I had once more the annoying problem with HPNetworkCommunicator.exe).  I then discovered that HP had published a software release that fixes the problem with HPNetworkCommunicator.exe.  I installed the new version of the software.  HPNetworkCommunicator.exe is now fixed, and my wireless connection remains stable even when the printer goes to sleep.

• Windows 8 I lose the internet connection after waking from sleep mode

  My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

  Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

  I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

  Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

  1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
  2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

  * Not sure about my translation of terms/options used above - I am not in an American version

  If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

  + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

  Hope this helps

  See you soon

  LZ.

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• 2000-2d11DX HP: laptop loses connectivity wi - fi after hibernation/standby

  My laptop loses wireless connectivity once it goes into hibernation mode or "standby mode". I have to restart the computer for the laptop to resume the wi - fi signal. This does not happen with other laptops I have.

  What is the solution?

  Thank you

  pilloo

  Hello

  Please try

  (a) right click Windows (ie the Start button).
  (b) Select Device Manager,
  (c) expand network adapters,
  (d) the device right click Wireless,
  (e) click Properties.
  (f) to select the power management tab,
  (g) uncheck the first option,
  (h) click OK.

  Kind regards.

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• HP Windows 7 home prem OA: my laptop won't come out of sleep mode after starting upwards!

  Hello I have a HP Windows 7 home prem AO. And I can't raise the lap top the sleep mod after departure. I tried rebooting with the removable battery according to the HP video help. But it does not help me I done all I can! If anyone can help me please!

  Hi there @Zotya15,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the computer not to wake. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  I will do everything I can to help to get more information.

• Laptop suddenly loses the wireless out of sleep mode

  I have a HP Pavilion g7 laptop running Windows 7 Home Premium 64-bit.

  Last month, it was the loss of connection Wi - Fi & will not return to the top of the standby mode. When I open the screen, the "enlightened" shows power button but the screen remains black and wireless orange shows (f12) instead of the blue button. I can hard down and restart in safe mode to get the screen to the top. So, I have to restart the computer several times to get the wireless to turn back. By pressing the f12 key has nothing to do with it. I have a HP desktop which is perfectly fine - no problems at all.

  Nothing has changed regarding the new routers, software or anything like that.

  Welcome to the forum, TM_Cali,

  Consider / try the following:

  WiFi disconnects after sleep - Wifi doesn't wake up

  IF you use no SHARING, try:

  Windows key + X > P (opens the control panel) > icons > network and sharing Center >

  Change the adapter settings > right click on your connection > properties >

  Scroll down in the Networking tab > uncheck the IPv6 BOX > OK

  OR - a better solution:
  

  Windows 8:

  Windows key + X > M (opens Device Manager) >

  Windows 7:

  Control Panel > display icon value > Device Manager >

  Next...

  Network adapters >

  Right-click your wireless adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  CHECK 'Allow this device out computer' >

  Ok

  Bluetooth:
  

  Windows key + X > M (opens Device Manager) > Bluetooth >

  Right click of your Bluetooth adapter > Properties > Power Management >

  Select as appropriate:

  Clear the check BOX "Allow the computer to turn off this device...". »
  Ok

  ======================================================================================
  

  For laptops:

  Pay attention to the warning to leave the device connected wireless and battery operated.  The device consumes little power; However, if you run your battery is very low, it could have an impact.

• my laptop loses connection and connect again when I restart the computer, nobody knows what might be the cause. It remains still connected locally

  I have problems with my laptop, it loses the connection to the internet and will not reconnect, I found the only way for it to re - connect is to restart it, someone at - it ideas to the problem.

  Hello

  The problem could be caused if there is no problem with the network card or a problem with corrupt or incompatible drivers.

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  3 is your stable Internet connection after rebooting the computer or is it often disconnect?

  4. you use a wired connection or wireless?

  If you are using a wireless connection, try to check the problem with the wired connection.

  Follow the steps in the link below and let know us the status of the issue.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

• Satellite M200 - problem detection USB connect after waking from sleep mode

  Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

  > fully up-to-date with all the drivers and everything else
  The latest version of the BIOS too?

• Windows 7 went blue screen when the sleep mode is activated

  Hi, it happened that Windows 7 X 64 went blue screen, when my PC has been set to the standby mode. I received the following from the Windows Event Viewer:

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 11/03/2014-17:39:30
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: my PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 0x000000d1 (0 x 0000000000000005, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 110314-22510-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      17265
     
     
      System
      My - PC
     
   
   
      0x000000D1 (0 x 0000000000000005, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000)
      C:\Windows\MEMORY. DMP
      110314-22510-01
   
  

  Dweng

  This phenomenon was related to mv91xx.sys magni Windows Driver of Marvell Semiconductor, Inc.  Yours is 4 years and more.  I remove the driver and install the latest driver available.

  

• 0x0000009F: when sleep mode is restarted

  Hello ^^

  Almost everytime when I put my pc in "standby", it crashes when I boot it to the top!

  I tried to fix this (0x0000009f) with several updates, but those who have not helped.

  I use an HP pavilion dv7 2120sb with windows vista (32-bit) is installed

  This is the log that I got:

  ' - < event="" xmlns=" http://schemas.microsoft.com/win/2004/08/events/event ">

  -< system="">

    < provider="" name=" Microsoft-Windows-Kernel-Power " guid=" {331c3b3a-2005-44c2-ac5e-77220c37d6b4}">

    < eventid="">41

    < version="">0

    < level="">1

    < task="">0

    < opcode="">0

    < keywords="">0 x 8000000000000002

    < timecreated="" systemtime=" 2010-08-25T20:00:41.307Z ">

    < eventrecordid="">216512

    < correlation="">

    < execution="" processid=" 4 " threadid=" 8 ">

    < channel="">System

    < computer="">PC_van_Miguel

    < security="" userid=" S-1-5-18 ">

   

  -< eventdata="">

    < data="" name=" BugcheckCode ">159

    < data="" name=" BugcheckParameter ">0 x 3

    < data="" name=" BugcheckParameter ">0 x 86001550

    < data="" name=" BugcheckParameter ">0x876fa030

    < data="" name=" BugcheckParameter ">0 x 86155170

   

   

  Thanks for the help!

  Hello

  the accident was caused by the pilot athr.sys - stretch of Atheros Wireless LAN device driver

  Image path: \SystemRoot\system32\DRIVERS\athr.sys
  Image name: athr.sys
  Timestamp: Sat Dec 20 09:01:43 2008

  So update the WLAN driver to fix it.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?