Laptop no longer recognizes his screen after windows updates

Similar Questions

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• T400 takes a long time to start after windows updates

  Hello

  I have a T400 I had to reset to factory settings (2008). After the reset, I started to download and install all windows updates. For a set of updates, after restarting the computer my T400 started taking some 10 minutes to start. She continues to do more another week later after you have installed all updates. The screen goes black for 10 min and then I get the screen of Thinkpad and wihtout a problem starting windows.

  Can someone tell me what could be the problem? How can I tell that update is the cause and uninstall it?

  Thank you! Lore

  Sorry:

  No I do not recommend a BIOS update.

  I think you DID an update of the BIOS via the update system and now the BIOS needs to be initialized.

  Only go in the BIOS, press F9 to load defaults F10 - Yes

  If this does not help, remove the battery of the BIOS for a few minutes.

• Blue screen after Windows updates

  Today, I got 12 updates to Windows update under Vista (security and others for internet explore). I use the 64-bit version and I get a blue screen and start each update even when I try individually. This is not the first time...

  No one knows why this happens?

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Resolution problems screen after Windows Update

  On 7 August 09 Windows updater does its thing and reboot, my screen resolution is able to go to 1024 x 768. (Usually its 1920 x 1200) I have only the option of 800 x 600 and 1024 x 768 and nothing else, I uninstalled all updates except 1 that he would not let me uninstall (HOTFIX for Microsoft.net framework 3.5 SP1 KB9535...)  In addition all my programs/games that I started running in 1024 x 768 resolution I can't run now because of this problem.  I updated my latest graphic drivers from the manufacturer and off TMM I did after reading in another forum.  What are the options should I not counting as reformatting?

  Hi Danman4132000,

  Thank you for using the Microsoft Vista answers Forum.

  I suggest you to install drivers for your video card in the yourManufacturrer Web site.

  Go to the Device Manager and look at the properties of your video
  card.
  Then go to your manufacturer's Web site, download and install the correct drivers with make and model of your video card.

  If this does not work, put your computer to boot and check if it works very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135/en-us

  Please let me know if this helps you.
   
  Kind regards
  Yama - Microsoft technical support.

• Windows blue screen after windows update FEB 10 2010 (stop: 0 x 00000050)

  After updating vista 32-bit with a major update and updates security 4-5 and 1 optional update, my system cannot load. I tried all the mods that are associated with the key f8 (as safe mod ect), then I tried to recover Vista disc, and then the repair system and still no-go. I've heard a chance to eliminate these additions with a command promp (for example using the Vista recovery disc) on an xp system. Unfortunately I have 32-bit vista, so the command prompt will be different slicely. My original Os cd can only perform format c: install and preserve old files or loading drivers (which I did not), so I downloaded and burned the vista recovery disk. I can't tell you my system specs because I can't make a dxdiag because I can't before the vista loading screen. From what I remember, I have a pentium quad core 2.4, 4 gig dual channel ram (I checked the memory diagnostics and is ok), gm-33 mother card, NVIDIA 250 gts grafic, power supply chieftec 550 w.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Stuck on the profile screen after Windows update

  After that a windows update last night, my computer is stuck on the profile screen and I can not connect.  By clicking on the icons for different accounts does not bring to the top of the login screen where I can enter a password. The screen just flashes and the wheel spins for a while and then comes back to the profile screen. I tried to boot into the different security modes but same thing happens and I can not connect. I also tried to fix the computer and restart at the last known good configuration under boot options with the same results. Short to reset the default settings that will erase all my data, (which may or may not work) is there another fix?  It seems that windows is starting up, but just the login screen appear so I can enter my password.  I have windows 7 Home premium version.

  Hello

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

  If the Panel username and password is not displayed during logon and the problem persists even in safe mode, then the question could be if there is a corrupted file system or some third party conflicts.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 and you have the product key and then the link provided below might help you to download and create installation media if you do not.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Satellite C55-B5101 - black screen after Windows update

  Mobile received Christmas day (all new) Satellite C55-B5101, saves Windows update (formerly 8.1) by getting only now black screen... Not very in computers so if you know what please he dumb down for me! Thank you

  Hello.
  I'll post a similar problem with mine. Here is something I've read elsewhere that can solve yours.

  Unplug the cable from the main charger.
  Remove the battery if possible.
  Press and hold the power button for 1 minute.
  Leave battery and connect the cable.
  Turn on.

• his lost after windows update

  Windows Update ran on August 3 and August 4, 2010. After one of these updates, I lost sound. How will I know that update has been the cause of my loss of sound? I have to go remove each update one by one until I have to get sound or y at - it an easier way? I am running Windows XP as SP3 OS.

  Mike,
  You have several sound devices on your system? for example , is there an audio set (blue, pink and green 1/8 "female audio taken audio) on your motherboard, as well as a set on an expansion card?  If so, you may need to select the correct sound playback and recording device in the tab "sounds and Audio devices" control panel "Audio".

  Please, vote if it is useful.  In addition, select mark or propose as answer if that answers your question, please.

• Aspire R7 572 G having a black screen after windows update 8.1. What should I do

  Hi all

  IM wondering, anyone having this problem before, Im of the problems with this black screen after startup, it happened yesterday I think microsoft needs to have updated some drivers rendering my black screen after startup. Initially, I thought it was my SSD, but it turns out that I can't get into Safe Mode.

  I read more info on this problem related to the other PC and try the preferred method of 'disabling' drivers Intel GMA HD. It worked, however, this means that the main driver is now reduced to a graphics card video standard with vram limited.

  I tried to roll back and even redownloading and reinstalling the intel driver in version VGA_Intel_9.18.10.3215. The blackscreen after boot have yet taken place. I missed something?

  This is an old version of Intel drivers.

  Try this, after uninstalling the old pilot Intel:

  http://global-download.Acer.com/GDFiles/driver/VGA/VGA_Intel_10.18.10.3316_W81x64_A.zip?acerid=63519...

• Stop unexpectedly (blue screen) after Windows Update

  I have problems with BlueScreen unexpected shut downs to 9.8.2015.  I keep trying to use the Action Center to find solutions, but it will not report (telling me there is a problem connecting to the Windows error reporting service).  Below is an example of the most recent error report order.  This problem is mainly after my computer goes to sleep or sleep, but sometimes while active.  The problem also seems to have started after only a few Windows updates that were installed this past fall 2015.  Your help is greatly appreciated!

  Signature of the problem

  Additional information about the problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  I would also update the driver associated with the driver support Dell Inc. PBA PBADRV.sys (yours is 2008) and if you continue to plant I would remove Symantec.

• blue screen after windows update failed synaptics

  original title: bsod after updating windows failed synaptics

  Immediately after the installation of attempt and failure of an update of windows for synaptics ps/2 port touchpad ive had a bsod on logon. I don't know if the BSOD is associated with this update has failed. I think I might have some kind of malware. logon attempts sometimes take several tries to get it on the desk. im running a computer hp pavilion dv6700 laptop

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Black screen after Windows Update 8.1 in Dell Inspiron 15R 5537

  Hi guys,.

  Hello, I have updated my Dell Inspiron 15R laptop 5537 Windows 8 Pro to Windows Pro 8.1 by using the Application Store.

  After a wait of nearly 6 hours, update has been made and after the installation of Windows, display was black, cursor blinking... I checked in the Microsoft Web site, and I found that not only me and a lot of Dell customers are facing the same question. I luckily managed to start in safe mode and I uninstalled both of my video drivers and I'm back to my windows 8.1. After that I updated my video drivers as shown in the link below, always my screen turns off. If I had no other choice than the reset my pc to windows 8 pro.

  Driver video link: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15r-5537?driverId=PWTRP&osCode=W864&fileId=3287401962&languageCode=en&categoryId=VI

  When I was checking for the latest version of the driver for Intel Graphics & AMD Radeon that supports windows 8.1, I am able to find a driver on the dell Web site.

  http://www.Dell.com/support/drivers/SG/en/sgdhs1/DriverDetails/product/Inspiron-17R-5737?driverId=6GGGM why it is not being updated in the list of corresponding product drivers... In fact I think that it is the fix. I'm not sure.

  If one has updated and I need technical support dell for this

  Hi guys,.

  After much research, I understand that is the problem because of the Intel video driver. There is a beta Intel video driver package that supports Windows 8.1. Try this update package and display your results. As I've already restored to windows 8. It will take at least 4 to 6 hours to update me the State. The link below is for Dell Inspiron 15R 5537 model.

  http://FTP.Dell.com/published/pages/Inspiron-15R-5537.html and install Intel HD Graphics Driver ver 10.18.10.3308 4400. You must follow the link because this driver is not yet downloaded in Dell drivers & downloads (referred in Dell Post)