Laptop Pavilion 17 t: transfer the information from computer to computer Win8.1 Win7
I now have a Lenovo computer Win7Pro laptop and I was looking for the best method to move the information from this device to the device to the laptop HP Pavilion 17 t. Win8.1 I looked at a lot of options on the Microsoft Community website, but too many people have had problems with them.
Do you have any recommended method?
Hello
It actually belongs to you. I ONLY transfers the user data and settings such as bookmarks, email configuration.
Kind regards.
Tags: Notebooks
Similar Questions
-
Original title: laptop
I have a Dell Inspiron 1501. There is a kind of cable I can buy to transfer the information from my main computer to my laptop?
Hello
Of course, you can use a USB drive, CD or DVD to transfer the data.
Or use an easy transfer cable system.
http://Windows.Microsoft.com/en-us/Windows7/how-to-get-an-easy-transfer-cable-----------------------------------------------------------------------------------------------------------------
This allows you to network the computers if you wish.
To connect two computers with a cable, not a router, it must be a crossover cable. These
are special cables, but they are not expensive.Connect two computers using a crossover cable (XP - Windows 7 may be the same)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cableIt is a description however computer stores will sell them at low cost.
http://en.Wikipedia.org/wiki/Ethernet_crossover_cableAmazon - example of a crossover cable
http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT-------------------------
Setting up a home network
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-networkConfigure an ad hoc network:
Ad-hoc networking
http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
Set up a computer-to-computer (ad hoc) network
http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspxHow to set up an Ad Hoc wireless network in Windows Vista
http://www.home-network-help.com/ad-hoc-wireless.htmlCreate an ad hoc WiFi network secure on Windows Vista
http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm------------------------
Or install a regular rnetwork:
These should help:
Share files and printers between Windows 7 and XP
http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/Configuration network host connection windows 7, xp and vista
http://Techblissonline.com/home-network-setup-connecting-Windows-7-XP-and-Vista/Networking of computers running different versions of Windows
http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows=========================================
More help at these locations: (Vista references also apply to Windows 7)
Vista - LAN
http://www.onecomputerguy.com/Networking/vista_network.htmVista network and sharing Center
http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htmSetting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Transfer of information from a .sparsebundle to Bootcamp
Hey guys,.
A few months ago, my computer is having problems, and my computer technology store decided to uninstall and reinstall my OS x and Windows partitions. Before they did, I supported the two partitions on an external hard drive. The shop reinstalled the two partitions, but for some reason some they did not transfer all the data from my old drive bootcamp back on my current partition. My external hard drive has a picture of .sparsebundle that seems to have all the data that I'm missing. How can I transfer the information from this disc image on my current bootcamp drive?
You can open the sparsebundle on OSX? If so, check out the files you need on the side OSX, switch to Windows and copy the files of the side OSX to Windows (provided that you can see the files in os x Windows system).
You should not attempt a restore from the sparsebundle to Windows for your Applications, it will cause problems.
-
Remember - this is a public forum so never post the private information such as email or phI cannot get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Do not work.one numbers!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Louise South,.
Follow the instructions below that may help you resolve the issue.
Method 1:
I suggest you to uninstall the software and reinstall it from the link below.
http://www.Microsoft.com/hardware/download/download.aspx?category=MKCheck whether the problem is resolved.
Method 2:
Follow the instructions in the link below and check if the problem is resolved.
Troubleshoot wired keyboards that do not or only the erroneous characters category
http://support.Microsoft.com/kb/258826Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Is it possible to transfer the license from one computer to another by e-mail
Is it possible to transfer the license from one computer to another by e-mail
OS: Windows 7 Home Premium
No, you transfer the license by ensuring its removed from the current computer. Continue to install on the new machine and reactivate by phone:
Activate Windows 7 manually:
1. click on start and in the search for box type: slui.exe 42. press enter on your keyboard
3. Select your country.
4. Select the telephone activation option and brace yourself for a real person.Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
I can't find the Bluetooth and transfer the pictures from my phone.
* Original title: bluetooth
I buy acer aspire E1 - 471 AND I CAN'T FIND THE BLUETOOTH. I CAN'T TRANSFER THE PHOTO FROM MY PHONE... AND ALSO I CAN'T USE MY BLUETOOTH, THE MOUSE AND THE KEYBOARD.
Hello Shirley,
If your computer has Bluetooth installed, there will be a label on the bottom of the system with the word "Bluetooth" and the Bluetooth logo on it. If the label is not present on the system or not Bluetoothlist, it is not equipped with a Bluetooth module.
For more information, see the links.
http://Acer.custhelp.com/app/answers/detail/A_ID/25/kW/Bluetooth
Why Windows is not find my wireless device?
To transfer pictures and videos, check out the link.
http://Acer.custhelp.com/app/answers/detail/A_ID/27644/kW/transfer%20Pictures
Keep us informed on the status of the issue.
-
I had to get a new phone because I dropped one and damaged the screen how am I supposed to remove the information from the old phone if I don't?
Are you turning in the Apple device, a company or the insurer? Can you turn on the device? If so, you could try to send a command to erase with iCloud. If this is not the case, if her deal with Apple, they he will wipe away. If the only damage the screen, you don't want just the screen replaced?
-
I bought an iPhone 6s and want to transfer the data from my old iPhone 4S with iTunes
I bought an iPhone 6s and want to transfer the data from my old iPhone 4S with iTunes but it says "the"iPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "
I checked and the version of itunes is the latest AID!
DooozySue wrote:
I checked and the version of itunes is the latest AID!
Most likely, what you found, is that the iTunes version is the latest available for your operating system.
The latest version of iTunes is 12.4.3. This version requires at least OS X 10.8.5 or later version, or Windows 7 or later version.
If your iTunes version is earlier than 12.4.3, it will probably not recognize your 6s performance iPhone iOS 9.
If you do not have the required operating system, get first. Then download from iTunes
-
How to transfer the backup from pc to ipad
How to transfer the backup from pc to ipad
If you want to restore your backup (you have copied something off the coast of the iPad you want to keep tot for example music, movies, pictures, documents?) then connect the iPad to your computer, select it in iTunes and either file > devices > restore from a backup, or the iPad in iTunes Summary tab, click the restore backup button: restore your device from an iCloud or iTunes backup - Apple Support
-
Hello
I use a cRIO-9025 controller and want to get the information from the c: disk volume using the function to read the Volume information in the palette file I/O. When I run the function with the path as "C:\". ", the function returns a 7 error indicating that the path is incorrect.
I used this function before with cRIO but unfortunately I have not any older devices with me to check this out now. I'm using LabVIEW 2009 SP1.
Thank you very much!
See you soon!
Sankah2k
On real-time targets VxWorks, the root of the path of the file is here (in lowercase). Try and let us know if it works. You would be better to use the constant path of the file to understand what looks like the path of the root directory.
-
What is the command of shortcut for all windows get the information from the computer?
What is the command of shortcut for all windows get the information from the computer?
instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...
just a command for windows xp, vista, 7 for system looking for information....
original title: what is the SHORTCUT COMMAND to get information from the computer system?
Hello BlackSecret,
The keyboard shortcut to get to the top of this information is Windows key + break Attn.
Who does what you ask? -
Aspect wide photo after you transfer the images from the camera
Original title - aspect wide photo after download
After you transfer the pictures from my camera to my PC, subjects are not as the original photo taken. People who are really thin show also stubby. I used another PC and downloaded normally photos. I used the photo of different programs, from Kodak, Roxio, windows Photo Gallery. I put my card directly into the PC with the same results. I tried to change my video setting and updated my NVIDIA card driver. Change the size of the photo doesn't do any good change just the measure of perimeter. I know that I can edit the photos, so people watching more thin but can you imagine doing that in every pic I take. I hope someone can help
I finelly solved the problem by playing with the resolution until I found the appropriate settings. How to change the setting, I don't know, but as long as it works I can live with that.
Bob
-
I get a deactivation notice on Lightroom 6 having been transferred all the information from my old mac again I. Dude I have Mac's wiped and so off Lightroom. I also use Lightroom 6 on a Mac book air. What should I do?
Hi mbaye,.
I rectified the issue of licensing. You should now be able to activate.
Please confirm when done.
Kind regards
Assani
-
I am trying to transfer the license from a Dreamweaver CS3 Macintosh product. A transfer of license form signed by the person who gave it to me. Can someone help me complete the process as cat Adobe say they are unable to help? I was told that the forum is reviewed by a team of experts. Anyone here? Thank you
Did you follow your form as well? A form must be completed and signed by both parties and submitted to the Adobe support via a support ticket. Chat support can't help, but should you indicated in section with the instructions.
-
Hi, I shot a few photos December 31 night mode RAW Nikon D800 and extreme as well as Sandisk card SDHC 32 GB. Looks like the card got some errors of memory so not able to transfer the files from the card to the computer. However, I am able to view the photos through Lightroom ver 4.4 library, but when I tried to import them, it gives me an error message indicating this file cannot be read.
Is it possible to save the photos to the "library window" in lightroom overcoming the card read errors?
Thanks in advance
If you see the photos in the library module, the photos are already imported. If I there are thumbnails in the import dialog box, that means the jpg display embedded in the Raws are ok, although the raw data itself is corrupted.
You may be able to save the jpgs shipped with this: Instant RAW JPEG
Maybe you are looking for
-
Equium L300 - 17Q - "Enter" button does not
As read you on the title my TOSHIBA EQUIUM L300 - 17Q enter button does not. screen-on the built-in keyboard works is that all the other keys work.I have reinstalled the keyboard from the device manager driver, then perform full system recovery and s
-
After some time on the internet, I get a notification that a stop me running my internet and then tells me a code and call apple
-
Qosmio G55 - brightness LCD is low
I was using my G55 for 6 months now and has had no complaints. Then I doubled my wifes laptop (from a different manufacture) and my PC to work (from a different manufacture) and I was shocked to see that it looks like my screen is yellowish and a hal
-
How can I install Command and Conquer: Red Alert (Windows 95) on Windows 7?
Hello! I tried to install Command and Conquer on my new computer that is running Windows 7, but it not even will let me install it, much less play. I insert the disc, click on 'Install Red Alert' and it gives me a progress bar indicating "Preparing
-
Reinstall the power interrupted while win7, how to continue?
When I turn on again, there is error message saying need to restart, after that reboot it is the same error message. I have a copy of linux, and if I install that first he would eliminate the content current window and I can reinstall win7?