Laptop Pavilion g6 with end of module startup and the memory + beep

Similar Questions

• HP PAVILION DV9000 WITH VISTA 64. KEYBOARD AND MOUSE NO LONGER WORKS AND CANNOT FIND THE DRIVERS. ANY SUGGESTIONS

  HP PAVILION DV9000 WITH VISTA 64. KEYBOARD AND MOUSE FOR LAPTOP DOESN'T WORK ANYMORE AND CAN NOT FIND THE DRIVERS. ANY SUGGESTIONS OF HOW I CAN RESTORE THESE?

  I had the top plug a mouse and external keyboard to access my laptop that works.

  Hello

  ·        What is the specific name of the laptop?

  Check if an error code or error message is listed in the Device Manager.

  a. Click Start, type devmgmt.msc and press to enter.

  b. expand the device and double click on the sub element.

  Here is the link to the HP website to download the drivers for the keyboard and mouse, look for the specific model number and download the drivers for the same thing: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodSeriesId=1842187&prodTypeId=321957

  You can uninstall the drivers for the keyboard and the touchpad and install the drivers from the link above or let the update of Windows install the drivers for the device:

  a. Click Start, type devmgmt.msc and press to enter.

  b. expand the device and right click on the sub element and click on uninstall.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The cam to computer with 2 GB of ram and the instructions say there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.

  y-13-non-pro-how-to-upgrade-ram.html http://www.EveryMac.com/systems/Apple/MacBook/MacBook-unibody-FAQ/MacBook-unibod

• Need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.

  I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.

  I use win 7.

  Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

• How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work

  How can I install CS5 on a replacement/new laptop? I paid full price in 2011 and the key (and it appears in my Adobe account under products), but it was a downloaded product and I can't find a download of this online version and my key does not work in CC.

  Your key does not work in CC, this is a newer version and would require a new purchase.

  Downlaod CS5 here.

  Download the CS5 products

• need to do a second 20 HD clip with a moving background image and the text it is flies in...

  Hi all the effects quite new based on im and the need to make a second 20 HD clip with a moving background image and the text it is flies in. I also need to create a cross-image basis. If someone could suggest the best way to do this it would be greatly appreciated. Thanks in advance

  Your question is not really explain much of what you need to achieve.  I don't know what a "cross image database", sorry.

  After Effects is a fairly complex application, and you will get much more satisfaction if you start at the beginning and learn the basics before jumping in too deeply.

• Computer laptop Pavilion G6 with 8.1 window is stuck on the installation of updates

  Hi my old laptop Pavillion G6 of 12 months (which was the worst computer I've ever owned!) is stuck on an update. The screen shows the message "Keep your PC up to... this installation to update 1 of 2" for 12 hours (overnight).

  A little over 2 weeks ago he had a problem with the WiFi connection - which also seems to be associated with the Windows updates - I got this one and it has been fine since then. Started an automatic update last night and now he's stuck. Any ideas?

  Hi Jamame,

  Thanks for your post, I will do my best to help you!

  I see that your computer did an update for more than 12 hours and has not completed or seems to have improved.

  First of all you could cancel the update, restart the computer.  Then you would go The HP Support Assistant to search for updates or problems. Here is a document to help performance. Improve the performance of the system without adding memory (Windows 7). I would also like to launch the File Checker.  Using the File Checker system to restore the system files. Now repeat your update with her power.

  If you want more help, please can you give us the exact model of the G6 you and the operating system you are using. How can I find my model number or product number?

• 'Open with' pop up at startup and during the session asking what file to open CHKUPD with. CHKUPD has no extension. Search does not find it.

  My problem is similar to the question asked by EamonnO.  Start a 'open with' screen opens asking what file to open chkupd with.  I think that hit "Cancel" would put an end to the action.  He appears periodically during my session on the computer or watching a movie.  I don't find the file using search.  I don't think that this means Daemon Tools because I never downloaded the program.  Some recent downloads include "Free File Viewer" and "Search for free Extension".  I have Vipre AV and System Mechanic running on my computer.  The situation may be harmless, but it is sure agrivating.  Thanks for any help you offer.  George

  Hello

  I had the same problem and there to remedy I just open the control panel and open then "Add / Remove programs.  The popup is apparently caused by a free File Viewer program.  I removed the program by clicking on the button Delete and the problem disappeared.  The free file viewer comes with a conversion program free .mp3 and seems to be completely unnecessary (I never needed the viewer of the file and open it with popup that was originally was boring and sometimes even nervewracking.)  If you do not have to uninstall programs of assistance, just the viewer of the file that comes as a free supplement program (problem).

  Once again, removal procedure: click on 'start '.
  Click on "Control Panel."
  Double click on "Add or remove programs".
  Click on "Free File Viewer" in the list of programs
  Click 'delete '.

  After this, the 'chkupd' open with popup when it stops appearing.

  Craig

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• continuous beep on startup and the black command screen

  I have problems with the boot on my computer laptop gateway. I bought it last year, and despite the update anti spyware and etc., he refuses to start after a black screen.it command refuses to go into hibernation mode is that drives me crazy. When I try to put it in this mode the red light that usually indicates the hibernation mode flashes 3 times faster and when I open the screen it displays the screen of welcome without a moments notice. is this just a virus? or is it something else. I don't have the keys sticky and I clean them every week and ran the antivirus program several times a week since I bought it.

  Hello

  Sound beeps are error codes that describe a problem with your machine. A continuous beep
  can mean keyboard (loose or bad cable), losing the card, power, a short circuit or other matter according to the
  System/BIOS manufacturer.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  ----------------------------------------------------------------------------

  Are there any error messages? May be material.

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

• problem with my mac pro book and the appstore

  I have a problem with my Mac Book Pro (2.53 ghz processor intel core duo / 0sx 10.6.8) and the app store:

  My apps no longer works after upgrade on the app store... Help :-(

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Once logged in go to the Terminal

  type

  Open $TMPDIR... me.

  Delete the folder

  com AppStore.Apple

  Close the terminal

  Open the App Store

• 2 beeps on startup and the white screen - Satellite P300 - 19 p

  Hi guys,.

  I installed an Express card yesterday and he did all sorts of havoc (IRQ conflicts, hook etc.).

  I went to reboot this morning and he is now just give me 2 beeps and nothing on screen. I watched the phoenix bios beep codes, but it is not listed. Any ideas if I do a reset of the BIOS with a rider?

  Of course I tried to remove the Express card!

  Any help would be fantastic

  Thank you

  Owen

  Hey Buddy,

  BIOS resetting is possible only to an authorized service, but I think that the BIOS is the problem because these beep codes mean that a hardware malfunction has been detected

  What you can do is to remove the battery and the AC adapter for an hour and then reconnect the two. Your laptop boot?

  If not it material s serious malfunction and you must contact a technician from laptop to help.

• Pavilion DV7-3162nr: HP Pavilion DV7-3162nr does not turn on and the battery light flashes during charging

  I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn.

  The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button the laptop would try to start then turn off after about one second. However most of the time when when I press the button nothing happens.

  I took out the battery and tried to immediately start the alternating current, but the laptop is like there is no power. The led near the power connector is on the AC adapter is plugged in. I checked the tension between the adapter and it is correct to about 19 volts, I even loaded to 1.5 Amps and voltage remained close to 19 volts. I tried now on the button for more than one minute with applied power (no battery or AC) and no change when I tried to start with just AC.  The battery is old, but shouldn't the laptop run on just the AC adapter with the battery installed? I do not think that windows 10 has done this, but it's a weird coincidense that he died during the upgrade.

  I read about simular problems with flags of HP but nothing exactly like it.  The fact that I can not turn on the laptop with just the adapter seems to be a problem really bad.

  Anyone has any ideas I can try to let me know

  I was able to fix my laptop.

  I thought that it must be a hardware problem, because the laptop would not run just the adapter. And the adapter was good, as I said, he had the right voltage and can support the load.  So after looking at a lot of U tube videos on how to disassemble laptops and looking for schematics on the laptop which I couldn't find. I disassembled the laptop and a beep on the load circuit and it showing. What I found, it was a bad MosFet at the beginning of the charging circuit. The MosFet P/N P0603BDG has shorted door to the Source.  I was able to get the part of China via Ebay for less than $5.00 total and it took a week to arrive.

  Now, the laptop charging the new battery and works very well. I could have found the bad MosFet faster if I had diagrams. Does anyone know if it is possible to get the schematics for this HP laptop? I found a manual and it helped a bit to disassemble the laptop, but he had nothing on the main map.

  This problem is now solved hope it helps someone out there.

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John