Laptop, running extreemly slow freezing.

Similar Questions

• My computer hp pavilion laptop runs very slow please help

  I bought a computer hp laptop pavilion g6 with i3 4 GB of ram and 1 GB graphics. It is only 9 months old and I've used it about 50 ~ 70 times alone. And now, it is very slow. I installed only 26 programs and no any program is larger than 1.5 GB but now it is running very slow and am very lag. So please help me what should I do?

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

• Why my computer running so slow and why online games lag and freeze.

  Why my computer run so slow and why do games lag and freeze so often-

  Windows Vista 64-bit on the HP Pavilion DV2 laptop IE9

  Product NX926UA #ABA number

  Start the HP Support Assistant software. Click troubleshooting, and then select each of the options available, except the performance. Delete all Temp files and temporary internet browser files will help you.

  Follow the instructions on this tutorial at home to define your default virtual memory paging size. It's certainly worth a performance improvement you will notice. Don't let not Windows controls the size of your virtual memory paging file.

  Fill your online games can be for various reasons. The most likely reason if you use wireless 802. 11 b or G is the connection. If you have a 802.11n wireless router and the wireless in your laptop card is capable of 802.11n bandwidth and then use it without a doubt.

• laptop running slow

  my hp laptop running slow it 1 year there stater Windows 7 32 bits, the laptop is a 210-2000 mini hp

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  If the criteria above, try the following.

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system, and then restart the laptop - this process can take several hours before the load in Windows.

  Kind regards

  DP - K

• My windows 8.1 is running very slow and freezes from time to time.

  My windows 8.1 is running very slow and freezes from time to time. So I ran sfc/scannow. It finds corrupted files, but could not correct. So I ran "dism / online/cleanup-image /restorehealth ' but there as well. Please help as soon as possible. Thank you!!!

  Original title: find files corrupt after sfc/scannow and could not repair

  Hello Akash,

  Thanks for the reply.

  As you said, after completing the scan found SFC, you get an error message indicating that there is corruption but was not repaired. Then, please follow the following suggestions to solve the problem.

  Use the System File Checker tool to repair missing or corrupted system files

  (Refer to: manually replace the corrupted file with a good copy of the file)

  http://support.Microsoft.com/kb/929833/en-us

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

• 38.0 my laptop is 100% slower. I've tried everything. HELP PLEASE

  I upgraded to 38.0 last night. now my laptop is 100% slower than 37. He can't stay with my typing as it always has. I've NEVER had this type of problem ever until I upgraded to 38.0. I also lost my bookmarks bar. I tried all the suggestions that the help page has to offer. Nothing helps. Everything else on my computer works great internet Explorer, I hate. My internet connection is the same and my McAfee Security Center does not detect any malware or viruses.38.0 has SLOWED to a CRAWL-LITERALLY. SO FRUSTRATED!

  I'm not a computer genius, but I know somethings thereon. I tried everything on your list for help and anything else I could think of to solve the problem... NO CHANCE! IT IS THE ONLY BROWSER THAT I LOVE. I AM BEYOND FRUSTRATED. I NEED FROM MY LAPTOP TO RUN AS ALLOWS IT BECAUSE IT'S MY PERSONAL COMPUTER AND WORK. PLEASE PLEASE PLEASE HELP ME!

  Time for a basic troubleshooting Firefox.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Months "Pavilion DV7 notebook" running VERY slow

  Had this laptop for the summer holidays, maybe there are 8-10 or more weeks and have had no problems with it so far.
  
  My laptop is so slow that I have something like 'my documents' loading can take 5 minutes and then hang. I write this from my phone my computer now runs so slowly that google chrome loading isn't really worth a try.
  
  My characteristics are (and it took me about 10 minutes to load).
  
  -5.4 windows experience index
  -Processor intel core i5 - 240 M @ 2.50 GHz processor
  -6 GB of RAM
  -64-bit operating system
  -windows 7 Home premium
  
  The task manager says I have my uses CPU is around what it would be before the problem (at least I think that's normal) but I am using 1.67 GB of memory, when nothing does not load, is - it normal I never really watched who before today.
  
  I did a 'system restore' who got running again for 30 minutes before it further deteriorated.
  
  I defragmented my drives.
  
  I deleted temporary files and run "cc cleaner".
  
  Pressing f10 at startup I got to perform a free hard drive scan (I think that's what it was called) - the result of this test was: "full hard drive 1 (305)"-I guess it's bad.
  On the same page, there was also a "memory test", going on the computer.
  
  I did a virus scan anti by using "avira".
  
  Any help you can give me would be welcome. I am a child of 15 years and it took me something like 30 weeks of my paper round of savings to buy this laptop. My mom and dad will kill me, so if I can fix it before I have to tell them, that would allow me to save a lot of grief.
  
  Sorry if this is the wrong section.

  Hello

  305 error code is a complete failure of the (Full) drive self test failed and would indicate that hard is defective and must be replaced.  This is also consistent with the problem of slow performance.  It is just the failure of a component and could happen to anyone.

  Your laptop must be under warranty, contact HP and arrange for the replaced disk - you can check your warranty status here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• my new laptop is very slow.

  my new laptop is very slow. I get a message "high utilization of the processor by windows media sharing", even if the windows media does not run.

  Hello

  1 have had any changes made to your computer before this problem?

  2. what version of Windows are you using?

  I suggest you to follow the methods below and check if it helps.

  Method 1: SFC scan run on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  a. go to the Media Player.

  b. in the menu-> file-> manage libraries-> select each library (music, video, photos, TV recorded (if you have)

  c. check the paths that he manages and make sure it is not too near the root of the C: drive.  For example, it should be something like c:\users\Jim\Music and c:\users\Public\Music BUT NOT c:\users because they will cause the whole directory to re tree - index over and over (when you surf the web, or change files in your profile).

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this information is useful.

• HP Probook 4520 s running extremely slow

  Hello

  recently my laptop have been slow (almost at a standstill). I suspected at first, it was a virus, but a test of the virus found nothing. So, I formatted my OS partition and installed Windows 7 Professional and that the essential software that I use. After a short time (1 day), he started running slow. among other things, I freed disk space, but it did not help.

  Then I ran the BIOS boot and test drive, and both returned "error: read failureError: failed to read.
  Help, please.

  Record everything you keep on an external hard drive. You have discovered why she was slowing down. Your hard drive has failed and needs to be replaced.

  The BIOS hard drive Diagnostics is an excellent utility for troubleshooting.

  If your Probook 4520 is still under warranty, contact HP for a replacement hard drive.

  If is no longer in warranty, it's time to buy a replacement hard drive. Once you have installed the new break of hard disk on the set of recovery disks or USB recovery media that you have made.

  Your Probook 4520 s uses a SATA hard drive 9.5 mm, 6.35 cm (2, 50-in). I do not recommend using a SATA3 drive for possible compatibility issues.

  A SATA or SATA2 SSD also works and will be a performance gain true if you choose to go this route.

  A link to the guide to maintenance and Service is here.

• my laptop is really slow with lightroom.

  my laptop is really slow with lightroom. How can I speed it up? Help

  I have a Dell Corei7 under windows 7 with 8 GB of Ram. Lightroom using 2530 MB of real memory.

  The fan works like crazy and the top of the Tower full gets also rather ward.

  No solution outside the upgrade of the laptop?

  Make sure that you have not distinguish faces on everything. Next to your name (or logo of Lightroom) in the upper left corner, there is a small triangle. Click on it and make sure that face detection is paused. Also, try turning graphics acceleration card off in the preferences-> help to run. Intuitively he saw wearing tends to slow down a lot of machines.

  That said, don't realize that Lightroom is not a lightweight program and fans running on laptops is quite common if you do a lot of heavy editing, or when export you a large number of images (or generate previews on them)

• Was working fine, today, super slow, freezes

  I am running windows 7, 64 bit, 6 GB ram, core i7.  Yet CS5 ran great for months.  Today is super slow, freezes.  I can't think a good reason for this.  Any thoughts on how to fix?

  Also, I opened another project, and all went well.  If this project is damaged in some way, is it an effective way to rebuild?  It is a complex project or your time faily.  I have started and restarted several times.

  Thank you

  Lisa

  I feel that still is preferred least Adobe programs.

  Was still built on the sonic program, and I think that parties substantial still. I think Adobe has a big bullet to bite if they ever were to rewrite the program in their own. We also forgive many of the oddities on this basis, but I also believe that many recall is also now Adobe code. It's certainly the most problematic of the Adobe programs I use.

  Here's another question, I usually customized road my buttons.  I noticed that when you edit in photoshop, it changes the flow of the buttons.  I suppose that it leans on the order of the layers, but appears not to be the case.  Can someone explain this for me?  This is getting tiring setting routing over and over.

  I'll try to find the wire last week where we did several tests of this. Once the menu added in again, the stacking order of layers in photoshop (or elsewhere) has no effect on the NUMBER of button. And the number of the button which is the key element in the delivery. If you have automatic number and you don't do anything in yet (and you can do it in PS) to change the number of the button, nothing should change in the routing. This will cause the problem is moving buttons around so that their positions are different.

  The follow-up of the specific changes that you deploy in the PS, and I'll see if I can help you understand why the routing changes.

  I changed the automatic routing preferences, and I like automatic routing now. But I use very predictable menus in words where align the buttons.

• My MacBook Pro is running extremely slow all of a sudden. Help, please!

  My MacBook Pro is in running extremely slow all of a sudden, that way for several days now and I can't understand what is the cause.

  Details: MacBook Pro (13-inch, late 2011)

  Processor - 2.4 GHz Intel Core i5

  Memory - 4 GB 1333 MHz DDR 3

  Storage - 500 GB SATA (264.44 498.88 free GB) drive

  OSX - El Capitan 10.11.5 version

  I tried the simple things such as checking for indexing spotlight, my home screen of the size of the compensation, first aid running in disk utility, etc.. But had no results. Any suggestions would be very appreciated!

  Back up all data immediately, as the internal drive may be failing.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• on my laptop running windows 7 more information disappeared from the window - topics (file, publishing, display, etc.), address bar and navigation buttons - everything I can see tabs - how do the lack of points to display

  Missing on my laptop running windows 7, all the info displayed at the top of the home page. All headings, i. e. file, change the view etc. disappeared. There is no address bar. There is no "home button", the button refresh, etc.. My wife was using the machine when it happened, so I don't know what she was doing. How to restore these features?

  most of the information has disappeared from the window - topics (file, publishing, display, etc.), address bar and navigation buttons

  When all the toolbars are missing, you are probably in full screen view, press F11 to toggle mode full-screen, or you can move the cursor to the top of the screen.

  The real problems you describe all set thanks to an extension and customization, see 01:10 steps later...

  You can make Firefox 5.0 looks not like Firefox 3.6.19, see numbered 1 to 10 points in the next topic difficulty Firefox 4.0 UI toolbar, problems (Make Firefox 5.0, or 4.0.1 resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

  It is much more beyond these first 10 steps in the list, if you want to make Firefox more functional.

  Toolbars and their contents have been rearranged and buttons have been merged dual-use, the net result is that I could see about 25% of what I had before and recorded about 10% of the area of the toolbar with great loss of functionality to hide things that might already be hidden and to create confusing buttons that already have keyboard shortcuts and don't need to be seen. The only good thing that has been ' Ctrl + / ' has been added to hide/show the modules bar that has not replaced the status bar.

• M40-277: the laptop is very slow, during the writing of CD/DVD

  Hello

  I have a problem with my DVD writer. When I try to write a CD or DVD with my laptop, my laptop is very slow, I can barely move my mousepointer and my buffer State maintains have failed (see screenshots). Even when I try to play a CD or DVD it slows down my laptop. I don't know what the problem is. Can someone help me?

  I have this laptop: "Satellite M40-277" with the DVD-RAM UJ - 841S.
  Screenshots:
  http://users.skynet.be/fa027951/s1.jpg
  http://users.skynet.be/fa027951/s2.jpg
  http://users.skynet.be/fa027951/S3.jpg

  Thank you.

  Hi Gianni,

  I use Nero to burn DVDs, and one of the configurable options is the task of "priority". If I set it to 'high' then my phone behaves as you described, that is very slowly. Check if you have you encode/burn too high task priority.

  Kind regards

• I can't get my psc1210 to work on my new laptop running windows 7.

  I can't get my psc1210 to work on my new laptop running windows 7.  I followed all the advice on the HP support pages, but nothing helped. some of the things I've tried:

  (a) followed by editing according to the http://support.hp.com/us-en/document/c02658990 it happens according to plan exccept that when windows 7 detects and tries to install the drivers, it fails. No details given on which iot fails. Troubleshooting process does not help

  (b) follow instructions as per http://support.hp.com/us-en/document/c02681060 however, the installation wizard detects that the printer drivers are not installed and just leaves everything!

  Any suggestions on how to get this range of hp psc1210 printers work with my computer laptop windows 7 would be appreciated.

  Thank you.

  Michael

  Hi Michael,

  Please, try the following:

  Make sure that the printer is not connected to the PC.and, follow these steps:

  1. In the Windows taskbar, click the Windows icon ( ), and then click devices and printers . Opendevices and printers window.