Laptop Sony VGN-NR160E system failed to load 5.2.10.211 c:\windows\system32\drivers\elxstor.sys the file is damaged or missing


Hi DGraf! You can try access to Safe Mode by pressing F8 while the computer starts up? If you are unable to access safe mode, then it would be possible that the operating system is damaged. You can order the CD from recovery through this page ~ Tim

Tags: Sony Computers

Similar Questions

  • Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

    I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

    You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

  • file: \windows\system32\drivers\sptd.sys status: 0 x 0000001 Info: windows failed to load because a system critics driveris missing or corrupt.

    Good evening

    Windows no longer starts.

    at startup, it tells me:
    Windows Boot Manager
     
    file: \windows\system32\drivers\sptd.sys
         
    status: 0 x 0000001
     
    Info: windows could not load because a system critics driveris missing or corrupt.
    PS: my pc is an Acer aspire 7738G and vista under works

    French

    Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:

    http://support.Microsoft.com/common/international.aspx

    Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:

    http://support.Microsoft.com/common/international.aspx

    Thank you.

  • AVGfree, SuperAntiSpyware, Malwarebytes, and Microsoft System Scanner have all 'stuck' when parsing C:\WINDOWS\system32\drivers\tgfncdrd.sys or C:\WINDOWS\system32\drivers\termdd.sys

    Original title: impossible to analyze an Antivirus software

    AVGfree, SuperAntiSpyware, Malwarebytes, and Microsoft System Scanner have all 'stuck' when parsing C:\WINDOWS\system32\drivers\tgfncdrd.sys or C:\WINDOWS\system32\drivers\termdd.sys

    Any suggestions? The entire computer freezes when it gets to this file.

    Thank you.

    I don't understand what it is. Given that it seems unique to the computer suggests you that it is malware.

    Can you do a right click on the file and select Properties. Please provide the details of what you will find in particular a name or a description?
    C:\WINDOWS\system32\drivers\tgfncdrd. sys

    Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  • Computer laptop Sony VGN-FZ35G built in camera doesn't work after upgrade to Windows 7

    I bought the laptop Sony VGN-FZ35G Arab Emirates UNITED in 2007 or 2008. It originally came with Windows Vista. Later I've updated with Widows Vista Ultimate and had the driver installed for its construction in camera. It was working fine. Recently, I upgraded my computer with Windows 7 Professional and built in camera stops working. The info on screen is 'the driver is used by another program. I can't trace what program uses it?

    Perhaps your Vaio is not totally compatible win7, did you visit Sony support and update the camera application?

  • need a new file system for C:\WINDOWS\system32\drivers\cdrom.sys

    Try to get a file cdrom.sys for my windows xp home edition... My current file has a virus and I need to replace my cd rom drive does not work. I wonder if microsoft has a place I can download the system files on the web? Thank you

    Hello

    I suggest that you follow the steps in this article and check if the problem persists.

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

  • stop loading at "windows\system32\drivers\crcdisk.sys".

    I lost power when running chkdisk.  Now stops at crcdisk.sys line.

    I would probably consider the first step to be to see if you can boot into safe mode.  If so, try a restore point to the pre-grant. Jay

  • Computer stops loading on WINDOWS\system32\drivers\crcdisk.sysrepair

    original title: WINDOWS\system32\drivers\crcdisk.sysrepair

    my laptop computer on windows\system32\drivers\crcdisk.sys stop

    Hello ernestoResto,

    You should try running a Chkdsk on your computer to check if there are bad sectors on the hard disk.

    a. Insert the Windows Vista DVD into the DVD drive, and then restart your computer from the DVD.

    N1ote: when you get the press quickly press any key to boot from the CD or DVD, press any key on the keyboard to restart your computer by using the Windows Vista DVD.

    b. Select your language setting, and then click Next.

    c. Select repair your computer.

    d. Select the installation of Windows Vista to be repaired, and then click Next.

    e. under System Recovery Options, select command prompt and type:

    CHKDSK [drive:] [/ p] | [/ r]

    [drive:] Specifies the drive to check.

    / p check even if the drive is not marked dirty, bad.

    /r locates bad sectors and recovers readable information (implies / p).

    WARNING: This could cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

    Thank you
    Irfan H, Engineer Support Microsoft Answers.

  • Driver problem? N ' not load driver \SystemRoot\system32\DRIVERS\kbdhid.sys...

    Recently, I get a blue screen message whenever I start my Vista Toshiba laptop. I think that the hexadecimal number is 7F with a bunch of 0, but it certainly has a 7 followed by a letter. When you use boot logging, a dozen drivers who appear to be associated with Toshiba or an AMD processor seem to be does not. So, I tried the BIOS update. Most of them disappeared accept the following:

    Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
    Did not load driver \SystemRoot\system32\drivers\parport.sys
    Did not load driver \SystemRoot\system32\DRIVERS\kbdhid.sys
    Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS

    Could someone tell me if any of them would cause a problem or anyone could suggest as what to do to fix my blue screen of death problem?

    Hello

    Have you added a hardware or drivers updated recently? Check Control Panel - Windows to see updates
    If all drivers have been updated it just before what is going on has begun.

    For 7f - this might be a problem of material such as uncomfortable cards or memory, while there are other causes.
    Power electric low could also lead to this. Use the troubleshooters above and below, and when you get to the
    pilots and segments of memory refer to my next message below and then return to the if necessary troubleshooters

    If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and all cables (are not
    just try to squeeze) on both ends if they are accessible and on the device ends if not (remove cables and)
    the relocation of their aid to eliminate minor corrosion).

    If a laptop or a PC, you will need to take to a store (not BestBuy or other BigBox stores) or your system
    Support from the manufacturer.

    ----------------------------------------------------------------------

    BCCode: 7F 0x0000007F which is the same as 0x1000007F

    UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

    This trap might be a bound trap (a trap the kernel is not allowed to capture) or a double foul (an error occurred during the processing of an earlier fault, which always results in a failure of the system).

    Parameters

    The first parameter that is displayed on the blue screen indicates the number of trap.

    The most common trap codes are the following:

    • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
    • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
    • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
    • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
    • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

    Cause

    0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

    A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

    Solve the problem

    Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

    The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

    If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

    Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

    If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

    Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

    Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

    If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

    Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • missing critical system driver or corrupt...\windows\systems32\drivers\volsnap.sys

    Hi, I have this error coming on my screen and I can not even log in safe mode. It shows the status: 0xc0000098 and it says info: windows failed to load because of criticisms of the system driver.\windows\systems32\drivers\volsnap.sys
    I have not a vista disc can any1 help me with how repair this problem pls thnx.

    If I could load files or start repairs on a USB stick and boot directly from it to fix the error?

    Download the ISO on the provided link and do a repair disc
    See if that will fix it...

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    You can make a tool to restart system, System Restore, etc. with it.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista repair disc.

    You can do a system restart tool, system, etc it restore.

    There is not a disk of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

    media center ehshell.exe received the error message 205 units

    of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

    After you have installed the XP SP3.

    How can I fix this error.

    Media Center worked fine until I installed SP3.

    Hello

    I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

    Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

    (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

    (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

    (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

    (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

    If the problem persists, follow these steps:

    You try to run the following commands to re-register all Media Center services:

    (a) close Media Center

    (b) click on the start menu, choose run and type cmd , and then press ENTER.

    (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

    · Regsvr32.exe atl.dl

    · C:\WINDOWS\eHome\ehl Sched /unregServer

    · C:\WINDOWS\eHome\ehSched/service

    · C:\WINDOWS\eHome\ehRecvr /unregServer

    · C:\WINDOWS\eHome\ehRecvr/service

    · C:\WINDOWS\eHome\ehRec.exe /unregServer

    · C:\WINDOWS\eHome\ehRec.exe/regserver

    · C:\WINDOWS\eHome\ehmsas.exe /unregServer

    · C:\WINDOWS\eHome\ehmsas.exe/regserver

    · Restart the Media Center

    Hope this helps and let us know if you need more assistance. We will be happy to help you.

  • Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

    This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

    Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

    Hello

    You did changes to the computer before the show?

    These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
    http://support.Microsoft.com/kb/973455/en-us

    I hope this helps. Let us know if you have other problems with Windows in the future.

  • I can not load CD on my computer because my windows 7 does not contain the file MSVBVM50. DLL

    my CD for learning English does not work because of lack of file on my system (windows 7)... and the file is DSVBVM50. DLL

    Your question have nothing to do with the Windows Update feature. Try posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7programs/threads ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

    I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

    Now, I get the message:

    "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

    As I understand it, that does not affect really any other files, they rely on the spot (I think), but

    HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

    Thank you!!!

    Try to be...

    SereneJulie

    Hi serene,

    Thanks for posting your query on the Microsoft Community.

    As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

    • Create missing files that are listed in the error message.
    • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
      1. In Control Panel, open backup and restore.
      2. In the section back up , click change settings.
      3. In the dialog box Configure the backup , click Next.
      4. In the dialog box that you want to save , click Let me choose, and then click Next.
      5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
      6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
      7. Click Next, and then click Save settings and exit.
      8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

    If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

    http://support.Microsoft.com/kb/973455/en-us

    Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  • I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

    I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

    You're right: 22020134.exe is the download of the installer of my link.  Did you use the serial number on the right of this download link?

Maybe you are looking for

  • Tecra M2 - question compatibility motherboard

    Hey all,. Lighter, I'll have to make a replacement motherboard on a Tecra M2. The unit is put under tension but with no video, so I'm assuming that I'm interested in the usual situation of gpu Nvidia faulty. However, I will only have access to the la

  • Don't restart Equium A200

    Work normally without any problems, close normally, but don't restart. Power light showing momentarily but drive hard light flickers and goes out. Tried to remove the battery but does not help Any suggestions?

  • Someone keeps me calling Windows.

    Someone keeps me calling Windows.  He says that my computer is to leave my details and wants me to turn on my computer, so he can walk me through some sort of fix.  It is really Windows?

  • Backup lost blackBerry Smartphone 8330 to 9650 news using Blackberry Desktop software? Impossible?

    Lost my beloved 8330 with tons of data into it, but I have an old backup to a month using Blackberry Desktop Manager V 4.3.0.17. Verizon wanted to know if I wanted to Android. No, I'm staying with Blackberry, so I got a new Blackberry Bold 9650. BUT.

  • FDMEE export to HFM fails

    Hi team,I get the error message below when you validate the option in FDMEE with HFM. Same problem happens if I export to HFM, the HFMValidate and HFMExport scripts are not get initialized.Even the fish don't get not gray out to show an error. Please