Laptop stuck in the loop of starting

Similar Questions

• HP 15.6 laptop "touch screen: laptop stuck in the loop of continuous factory reset

  I brought a laptop that has been the view at Sam model yesterday.  I tried to do a factory reset, but once he gets to "Windows Setup" it makes a continuous loop.  It will start at 64% go to 100%, then restart.  When it turns on, it is always 'Windows Installer' and goes right to 64% and then 100%, then restart.  I started at 22:45 (28/07/2016) last night and it's always the same.

  What can I do to stop the program?

  Hey @GwenC,

  Please try the steps prescribed by my colleague. The path to resolution would play a HP System Recovery. You can learn more about this process here. If you have not already created a recovery media, I advise you to contact our technical support team here: (contact) / 10282847/model https://support.hp.com/us-en/contact-hp/product/HP-Pavilion-Gaming-15-ak100-Notebook-/10402445

  The alternative who get the computers at the point of purchase for a trade (if you are still in their chronology of return).

  I hope this helps. Good luck!

• Pavilion 15-P008TX: laptop stuck in the loop of continuous reset

  Please someone help me. My phone was messed up since I've updated.

  This all started when I got a notification of update to windows 8.1. It was all good until the next day when I started it up and it wouldn't pick up any Internet connection, even though I knew that my router was working as I could get Internet access on my mobile. I went to the network and sharing Center and he said he was disabled so I right click on it to enable. After I clicked it, my laptop has a blue screen and came up with the following message will appear something like this: we had a problem, we collect some error information, and we will restart your device.

  So, it restarted and I tried to re activate the network again and it's the same thing. After about 5 tries the occurrence of thing kept rebooting. I didn't know what to do so I thought to just restore the laptop. I did it and now it's just in this reboot loop continuous blue screen. I can't even log in window, it just keeps going to the blue window, then restarting.

  This is a new laptop, not even 6 months and he was going well until I was told to update. I think just taking in the repair center that I have warranty and I feel as if I can't fix it myself that I can't in my real desk.

  Yes. After the resumption, if the problem persists, call our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

• Lenovo Y410P was stuck in the loop of auto repair, but it came out

  So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

  TookMeAWhile wrote:

  So my Lenovo Y410P was stuck in the loop of auto repair, I tried holding the power button and F11 and on as the third seeks the laptop turned on as usual. But now I'm afraid to turn my phone off, how do I know if the problem is solved? And if it is not, what should I do?

  Check the system for corruption files by running sfc/scannow in an elevated command prompt.

• My computer is stuck in the loop "Update Configuration". Boots only in safe mode.

  My computer is stuck in the loop "Update Configuration". Boots only in safe mode. I tried to do a system restore, but an error message appears that says:

  To perform an offline system restore, you must specify which Windows installation you want to restore. For example, if the installation is in "C:\Windows:" should be restored, enter the following command: rstrui.exe/OFFLINE:C\Windows

  I typed in the "run" command, and it didn't work either. VIsta came installed on the computer, so I don't have a disc to insert and reboot with. Help, please!

  Thanks, Ben

  OK, I found how to fix this problem.

  Go to this site download and buy the repair for Vista disc. Burn it to a disc.
  This link will guide you in burning instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn
  Start your computer with the disk and follow the instructions
  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

• Windows 7 takes too long to install, stuck to the 'Setup program starts.

  Hello

  I have a computer that is currently running Windows 7, I got three years. When the operating system he reached last started, I decided to reinstall it from the installation disc that came with it. But for some reason, I'm stuck at the "start Setup", even though I looked in other forums and as I said it, disable the floppy drive on the bios. I managed to turn it off, but still, stuck on 'the installation program starts' I tried to format the hard drive again. I am a student and I really need to get my computer operational.

  Data sheet:

  Windows 7 Home Premium

  RedFox N68S3 + motherboard

  AMD Athlon II X 2

  P. S.

  -My current operating system, Windows 7, is totally corrupted and cannot start. Always displays 'Launch Startup Repair' tried and cannot solve the problem

  If you have bad clusters, the only choice is to replace the hard drive.

• Office stuck in a loop of starting Windows XP restart after changing the map of memory of RAM DDR

  I added that a card of memory DRAM DDR to my CPU ENPower and immediately after my monitor has not received a signal. Then, after reading several articles, I cleaned the CMOS battery, and although he got the monitor works he has also prevented my system to boot with the Windows XP operating system. I've accessed the CMOS utility to change the date/time, nothing helps I still can't get in Windows XP and the user login screen. Now, the system passes through 1 and 2 screens that are part of the commissioning, then lands on the Safe Mode Options screen by which he gets "stuck" not allowing me to select the data options, then it will auto restart every 30 seconds.

  The screen message reads:

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. If your computer stopped responding, restarted unexpectedly or has been automatically closed down to protect your files or folders, select last good known Configuration to return to the most recent settings that worked. If a previos startup attempt was interrupted due to a power failure or because the power or Reset button was pressed, or if you are not sure what caused the problem, choose Start Windows normally. »

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last good known Configuration

  Start Windows normally

  All the these appear on the same screen, but I have no opportunity to select one of them during this mode my pc in.

  What should I do? I need to access the BIOS utility to change the settings of the RAM, or is there something else that I forgot who will be able to get my pc to the top and running properly again?

  Thanks for your advice in advance!

  Remove the memory module that you added.  If the computer can be started without him, then the module is defective or is not compatible with your computer.

• Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

  I have a Satellite C660-115 which is stuck in a loop "of despair".
  I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

  I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
  No problem at all with the restoration.

  Started doing the updates for Win7; SP1 seems to install OK without errors.
  The system then picked up 37 Win7 updates automatically and asked to reset.
  Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
  It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

  I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

  How to exit this loop? What is causing this problem, which I have never seen before?

  No software has been installed, other than that of the recovery process.
  I even uninstalled McAfee, just in case this could be a problem - no change.

  Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  It identified the rootkit and removed.
  Seems to be OK now!

  Hope this post could help others.
  Of course, the factory restore does not erase the HDD MBR rootkit...

  Thanks for sharing!

• HP pavilion 17 Laptop: stuck at the loading screen

  Hello!
  
  So I did have problems with startup forever, but since yesterday my laptop often stuck after the HP logo appeared and the loading circle turned for a few seconds. While it gets stuck, it begins to make more noise and gets hotter than she usually during boot. I did a check of the system in the BIOS bit everything seems fine. Someone at - it knowa the problem or solution?
  
  Thanks in advance,
  
  Giovanni

  I'll do it every time I have to restart the laptop. A couple of times now, my laptop goes down, and whenever it starts again ot said something about the low battery beong. So maybe theres problems with my battery. I know this isn't my charger that I won't get this problem when my battery ' out. Thank you two for responding and so fast too.

• Mail stuck in the loop. Cannot access same Mail preferences!

  Hello to you all. Can anyone help? I'm trying to set up Mail (in lieu of Thunderbird) I want to use the possibilities of synchronizing with Mail on my other Apple devices. The title says it all, and I have attached a screenshot of what I see. Impossible to do anything, except to force them to leave cannot even open Mail preferences! I'm on iMac with El Capitan Version 10.11.3 Mail Version 9.2 (3112). Henry

  

  Hi Aitchb65,

  Thank you for your participation in the communities of Support from Apple.

  I see that the mail is stuck in a loop and the opening of many windows unexpectedly. Try to run Mail in 'safe mode' by following these steps:

  Open Mail and immediately hold down the SHIFT key until the Mail is opened. This causes the Mail to open without any message or box to the selected letters.

  Of Mail if closes unexpectedly when displaying certain messages.

  If the Mail normally opens, try to update your SMTP settings -Mail (El Capitan): list of outgoing mail server settings.

  You can also delete email accounts in Mail preferences and start over after export and save all important messages. To help in this part, see Mail (El Capitan): Configure Mail with your email accounts and Mail (El Capitan): import / export the mailboxes.

  Sincerely.

• Laptop stuck on the screen to "prepare the AutoFix.

  My laptop HP a few months came pre-installed with windows 8. When I tried to start it this morning it came with the screen to "Prepare the automatic repair" and is pasted on it. It is not off or change to a different screen as "scan your computer. I'm sure that it does not start in safe mode by pressing f8 or shift + f8, Ive tried several times. I don't know what to do because it's just stuck on the same screen "prepare auto repair.

  This is not a good thing. The long test. Post the results here.

  The result of the test is indicative of a hard disk failure requiring the replacement of the hard disk.

  Contact HP for a replacement under warranty hard drive. You will need the failure status code providing for the drive test hard when you contact HP.

  It's time to find your set of recovery disks. You will need to install the operating system and the software that came with your laptop.

  Best regards
  ERICO

• Out of the box Alpha stuck in the loop of repair

  Just got my new Alienware Alpha, plugged into the TV (Panasonic TC-P42ST60), and set up as usual, but after turning on it starts up to the Alienware logo then restarts, after reboot it gets captured it repair your PC loop, finally giving me the blue screen of troubleshooting.

  I tried to use system restore to factory Dell but it is always the case. When I try to start in safe mode, that it says windows need to finish to install everything first and then restarts.

  I am stuck in a loop.

  I managed to pinpoint the problem.

  I plugged the Alpha on an Asus computer screen, then he worked as usual, it seems that Alpha can't handle the EDID HDMI to Panasonic TV. I noticed at the start that he said 1080p@50Hz instead of 60 Hz and this was to launch Windows.

  I'm going to continue with the installation via screen Asus and I hope that force 60 Hz in display settings, so it does not work with the TV.

• Stuck in the loop of the license of this software - Adobe has no idea CC2014

  For weeks now, I was stuck in a loop of having to "license this software" or "Starting the trial", when you try to start any Application of CC. I started, because I downloaded CC2014 and also occurs when you try to start my old apps CC.

  Have been on mail and phone with Support Adobe several times and for hours. Support has been very helpful, but after remotely, they tried to do almost everything with my Mac and installing CC, it is clear that Adobe have no idea what is causing the problem.

  The forums are full of solutions to that of other users with the same issue, but none of this helps. I have and support have tried everything.

  I'm a little more luck than others, since I can run my Adobe applications in trial mode but with left (?) 00 days. Others may even open their applications.

  I am posting this in hopes to gather all experiences I and other users have this troubleshooting with Adobe. I have case No.: 0185617726 that has now taken the magnitude for the third time.

  Flemming

  Just completed another session of 2 hours on the phone with support and they finally found the question :-)

  For some reason, there was a time offset in the log files (~/Library/Logs/amt3log) opened in the Console and the current OS time/clock set automatically by my time zone.

  Supporters managed to align the time while he was good in the BONES and newspapers (don't know how but terminal performer of some commands etc.)

  If everything seems to work now, and I'm a happy user of Adobe still :-)

• Servo motor gets stuck in the loop

  My project is to control two motors from the pedals with LabVIEW in combination with UMI-7774 and PCI 7350.

  I use a traditional format of State Machine to simultaneously control two motors according to the absolute position mode.

  In one of the first States, both motors are wound manually by using the speed mode (to make a desired voltage).

  In a later State, the motors are wound to a position specified by the user when you press a foot switch. When you press the other pedal, they are then held in the previous "original" position

  After the first "Tension" indicate when the winding engine and the course due to the pedals is running, the program gets stuck in the State of wind.

  Although drivers are told to go to a specific position, they never move and that's why the program is unable to move to the next State.

  I've attached a screenshot of the winding State where the program is stuck (the engines are not mobile, so when the final position is to compare it with the desired position, the loop continues to go).

  Help, please.

  CAT

  I solved the problem.

  States "Wind engine left" and "Right wind engine" speed has been put back to zero. When the program moves toward States of wind/flow, the speed is always zero (the engines cannot move).

  I simply set the speed value desired in each of the States LBL/RBL (that allowed the engine to get to the position of desire).

  Thanks for all the help,

  Catherine

• Stuck in the loop now accepting the new terms of use on Xbox Live Please HELP!

  I am stuck in a loop of redirection while trying to accept the new terms of use for XBox Live. I have a child account parental consent is required. I KNOW im putting the good info because when I put wrong information, it tells me that the password is incorrect. When I put the correct information and click identify you, let's return to the page where I have to click on I accept. Is this a problem with Xbox.com? Is this a problem with my account? Can someone please answer this question? Ive been very angry, because it has been updated. Please, I just want to play online and talk to my friends. Any help would be highly appreciated. Thank you!

  Try Xbox support:
  http://support.Xbox.com/en-us/