Laptop stuck on Windows 7 loading screen, beeps continuously

Acer Aspire 4810 t / 4810 t / 4410-T series
Windows 7
2 years

My classmate laptop is stuck at the loading/starting Windows screen 7 (the black) and it beeps continuously (until I turn it off). This happens only on NORMAL startup, as reboot or adequate powering.
I have already put the RAM, but the problem persists. I noticed the HARD drive light flashes in conjunction with beeps so I tried to get that too, but it does not solve the problem either.

Any other ideas? Should be replaced already?

Video: http://youtu.be/3s4Uj8IwnVA

EDIT: my classmate said he replaced the hard drive and it solved.

Hi again,

I have just solved the problem, the "F12" key on the keyboard of the laptop has been taped...

Tags: Windows

Similar Questions

  • Blue laptop when locks Windows xp loading screens

    HP G60-535 DX laptop

    Processor T4300 / 2.1

    I'm doing a clean install with Windows xp professional.

    Old sata HARD drive failed and I bought a new sata HDD (the same as before).

    There is no operating system on the laptop.

    The judgments of the laptop and blue screen with the message:

    A problem has been detected and windows has shut down to prevent damage to your computer.

    If this is the firs time you've seen this stop error screen restart your computer. If this screen appears again, entering as follows:

    Search for viruses... etc.

    Technical information:

    STOP: 0X0000007B (0XF78D6524, 0 X 0000034, 0XC0000034, 0X00000000, 0X00000000)

    Need help please

    Hello:

    He does this is because XP doesn't have sata drivers to see the hard drive.

    Please read the info at the link below, and then read and follow the instructions on the downloadable PDF for all drivers sata wake Intel section.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  • Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

    Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Data recovery, if/before you reinstall:

    1. slave of your hard drive in another computer and read/save your data out there.

    2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

    3 Alternatively, use Knoppix Live CD to recover data:

    http://www.Knopper.NET/Knoppix/index-en.html

    Download/save the file Knoppix Live CD ISO above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://isorecorder.alexfeinman.com/isorecorder.htm

    Download the Vista software from the link above.

    After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

    Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

    Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

    Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

    When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

    Click on the icons of hard drive to open and to understand which drive is which.

    Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

    Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

    See you soon.

    Mick Murphy - Microsoft partner

  • With the new Apple TV, I'm stuck on a black loading screen in the application to access all CBS. How can I solve this problem?

    I have the new Apple TV, and after seeing a show in the application to access all CBS I'm stuck on a black loading screen. This happened almost 10 minutes now and I don't know what to do to be able to find the main screens of the application and to be able to continue to watch the shows within the app.

    Press twice on the logo TV button then slide upward on the touchpad.

    The CBS app is stuck and hitting the button twice allows you to force the application to quit.

  • HP Mini210-1041NR hangs on the Windows Xp loading screen

    my HP Mini210-1041NR hangs on the Windows Xp loading screen, the laod reached late bar, then he stops and restarts, can someone hlp me difficulty this please

    Hello:

    Please read this guide and read the news on the chipset intel.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

    Tip: Your model has the NM10 chipset.

    Paul

  • Last night, my laptop that runs windows xp blue screened and says something about the queue

    original title: help solve a mistake, please on windows xp

    Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

    SC stop cisvc

    SC start cisvc

    Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

    It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

    However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

    If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

    If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

    Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

  • Latitude D610 screen turns off after the Windows XP loading screen

    I'm having a problem with my Latitude D610 where after the Windows XP loading screen, the screen turns off completely. No BSOD, no login screen, just a white screen. This started happening at least a year, however, I bought a new computer if it is passed to the hatch. I tried the system restore when it appeared first without success. The computer starts in Mode safe. Any suggestions?

    If it starts in mode without failure, then its almost certainly a driver and with the blank screen problem, I suspect a display driver.

  • Stuck on Windows Resume Loader quick screen with USB keyboard, so I can't answer

    Windows Vista has not recovered to sleep, so I turned off computer and rebooted.  Now, I get the message Windows resume Loader

    "The last attempt to resume the system from its previous location failed. Attempt to retake?  Continue with the system summary or remove data restoration and menu system start-up. "

    I have a USB keyboard so I can't use the arrow keys, or enter key, so it's just sitting there. My computer has no PS/2 keyboard entry. I tried to hit the F8 key on startup (as well as the F12), but I can't get another screen. How to answer the question with a USB keyboard?

    Found the solution. Keyboard has been plugged into the USB port on the monitor.  Cable keyboard switched to the USB port on the computer, and then click keyboard worked, so I could answer the question. I chose "Delete restoration data and proceed to system boot menu."  Everything works fine now.

  • 9 e - learning stuck in grey, Captivate loading screen

    I created several e-learning that are run in the LMS Crossknowledge platform. It was everything works fine. Until I made a few small changes simple content (text and images) landslides and the question slides (changed the text). When I try to open e-learning, the loading screen hangs or stops running.

    When I open e-learning SCORM cloud is just works very well. That's how the log file looks like:

    undefined1: my 25 July 2016 15:12:00 GMT + 0200 (CEST).

    2: my 25 July 2016 15:12:00 GMT + 0200 (CEST).

    3: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in the start - menu Version: 6.0.0 last modified = 25/07/2016 13:11:52

    4: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - browser Info (Netscape 5.0 (Macintosh;) Intel Mac OS X 10_11_5) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/31.0.1650.57)

    5: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - URL: https://cloud.SCORM.com/content/courses/KEI6T96RG1/1022479039a/0/index_scorm.html

    6: my 25 July 2016 15:12:00 GMT + 0200 (CEST).

    7: my 25 July 2016 15:12:00 GMT + 0200 (CEST).

    8: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in ClearErrorInfo

    9: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - part of GetQueryStringValue 'StandAlone' not found, poll: empty string

    10: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - part of GetQueryStringValue 'ShowDebug' not found, poll: empty string

    11: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strStandAlone = strShowInteractiveDebug =

    12: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - Standard Configuration file - SCORM

    13: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - standard Configuration file - SCORM

    14: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in LMSStandardAPI strStandard = SCORM

    15: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call Initialize Standard

    16: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_Initialize

    17: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    18: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - Grabbing API

    19: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    20: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - research with algorithm improved ADL

    21: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GetAPI

    22: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GetAPI, research parent

    23: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_ScanParentsForApi, win = https://cloud.SCORM.com/content/courses/KEI6T96RG1/1022479039a/0/lmspreview_scorm.html

    24: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    25: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSInit

    26: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSInitialize

    27: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    28: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    29: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSInitialize

    30: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = true

    31: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - real return

    32: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GetLessonMode

    33: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    34: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSGetValue strElement = cmi.core.lesson_mode

    35: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    36: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    37: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSGetValue

    38: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = normal

    39: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - intSCORMError = 0

    40: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - normal return

    41: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strLessonMode = normal

    42: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - normal return

    43: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_IsContentInBrowseMode

    44: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSGetValue strElement = cmi.core.lesson_mode

    45: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    46: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    47: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSGetValue

    48: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = normal

    49: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - intSCORMError = 0

    50: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - normal return

    51: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_IsContentInBrowseMode, strLessonMode = normal

    52: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - false return

    53: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GetStatus

    54: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    55: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSGetValue strElement = cmi.core.lesson_status

    56: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    57: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    58: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSGetValue

    59: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult do not attempt =

    60: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - intSCORMError = 0

    61: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - returning not attempted

    62: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strStatus do not attempt =

    63: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - returning not attempted

    64: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - set the State to incomplete

    65: my 25 July 2016 15:12:00 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.core.lesson_status, strValue = incomplete

    66: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    67: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    68: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSSetValue

    69: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = true

    70: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - real return

    71: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_TranslatgeExitTypeToSCORM strExitType - SUSPEND

    72: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - return suspend

    73: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_CallLMSSetValue strElement = cmi.core.exit, strValue = suspend

    74: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    75: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    76: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSSetValue

    77: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = true

    78: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - real return

    79: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - InitializeExecuted call with the parameter true

    80: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in InitializeExecuted, blnSuccess = true, strErrorMessage =

    81: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    82: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in GetEntryMode

    83: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in ClearErrorInfo

    84: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    85: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GetEntryMode

    86: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    87: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSGetValue strElement = cmi.core.entry

    88: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    89: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    90: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSGetValue

    91: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = ab initio

    92: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - intSCORMError = 0

    93: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - back ab initio

    94: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strEntry = ab initio

    95: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - first return time

    96: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in GetDataChunk

    97: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in ClearErrorInfo

    98: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    99: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GetDataChunk

    100: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    101: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSGetValue strElement = cmi.suspend_data

    102: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    103: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    104: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSGetValue

    105: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult =

    106: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - intSCORMError = 0

    107: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - back

    108: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - at SetBookmark - strBookmark = 0, strDesc = undefined

    109: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in ClearErrorInfo

    110: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    111: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_SetBookmark strBookmark = 0

    112: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    113: my 25 July 2016 15:12:00 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.core.lesson_location, strValue = 0

    114: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    115: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    116: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSSetValue

    117: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = true

    118: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - real return

    119: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SetDataChunk strData = 0

    120: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in ClearErrorInfo

    121: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    122: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_SetDataChunk

    123: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    124: my 25 July 2016 15:12:00 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.suspend_data, strValue = 0

    125: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    126: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    127: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSSetValue

    128: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = true

    129: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - real return

    130: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    131: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in GetStudentName

    132: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in ClearErrorInfo

    133: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in IsLoaded, return - true

    134: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GetStudentName

    135: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    136: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_CallLMSGetValue strElement = cmi.core.student_name

    137: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - in SCORM_GrabAPI

    138: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    139: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - call LMSGetValue

    140: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - strResult = User, Captivate

    141: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - intSCORMError = 0

    142: my 25 July 2016 15:12:00 GMT + 0200 (CEST) - back user, Captivate

    143: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SetPointBasedScore, intScore = 0, intMaxScore = 100, intMinScore = 0

    144: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in ClearErrorInfo

    145: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in IsLoaded, return - true

    146: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in IsValidDecimal, strValue = 0

    147: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - return True

    148: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in IsValidDecimal, strValue = 100

    149: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - return True

    150: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in IsValidDecimal, strValue = 0

    151: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - return True

    152: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - conversion of SCORES to floats

    153: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - call of LMS

    154: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_SetPointBasedScore - SCORM 1.1 and 1.2 do not support the SetPointBasedScore, falling back to SetScore

    155: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_SetScore intScore = 0, intMaxScore = 100, intMinScore = 0

    156: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    157: my 25 July 2016 15:12:01 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.core.score.raw, strValue = 0

    158: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_GrabAPI

    159: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    160: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - call LMSSetValue

    161: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - strResult = true

    162: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - real return

    163: my 25 July 2016 15:12:01 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.core.score.max, strValue = 100

    164: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_GrabAPI

    165: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    166: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - call LMSSetValue

    167: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - strResult = true

    168: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - real return

    169: my 25 July 2016 15:12:01 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.core.score.min, strValue = 0

    170: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_GrabAPI

    171: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    172: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - call LMSSetValue

    173: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - strResult = true

    174: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - real return

    175: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - real return

    176: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - at SetBookmark - strBookmark = Slide_1, strDesc = undefined

    177: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in ClearErrorInfo

    178: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in IsLoaded, return - true

    179: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_SetBookmark strBookmark = Slide_1

    180: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    181: my 25 July 2016 15:12:01 GMT 0200 (CEST) - SCORM_CallLMSSetValue strElement plus cmi.core.lesson_location, strValue = Slide_1

    182: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_GrabAPI

    183: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    184: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - call LMSSetValue

    185: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - strResult = true

    186: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - real return

    187: my 25 July 2016 15:12:01 GMT + 0200 (CEST)-in SetDataChunk strData = - A1A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0 A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP000AA0000C-1A0DTcpQuizInfoStudentIDBAVcpQu % 20CaptivateQcpQuizHandledAllBA %2C izInfoStudentNameAPUser $ _ # _ # $

    188: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in ClearErrorInfo

    189: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in IsLoaded, return - true

    190: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_SetDataChunk

    191: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_ClearErrorInfo

    192: my 25 July 2016 15:12:01 GMT + 0200 (CEST)-SCORM_CallLMSSetValue strElement = cmi.suspend_data, strValue = A1A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0's % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP 0a % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP0A % 24nP000AA0000C-1A0DTcpQuizInfoStudentIDBAVcpQ uizInfoStudentNameAPUser %2C % $20CaptivateQcpQuizHandledAllBA _ #-#_ $

    193: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - in SCORM_GrabAPI

    194: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - SCORM_GrabAPI, return

    195: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - call LMSSetValue

    196: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - strResult = true

    197: my 25 July 2016 15:12:01 GMT + 0200 (CEST) - real return

    Someone who has a solution for this?

    Greetings.

    @Cromm if it works fine on SCORM cloud, the cause of your problems must be linked with the LMS with Captivate. What is the % of the preload value? What happens if you lower this percentage?

  • Help! My computer is frozen on the Windows Vista loading screen!

    I have a HP Pavilion laptop. It is around the age of 18 months. My computer turns on but freezes on the blue screen that says Windows Vista Home Premium down. He not even me to the screen you want to connect. I can move the cursor, but it seems to be.

    It has been like that for a few days. Any suggestions?

    Thank you!

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Acer laptop stuck on Windows 7 update 31 of 31

    You just bought an Acer brand new and when I stopped it are stuck on update 31 of 31. I called Acer support and they said I have to reload Windows and that they won't support anyone who chooses to make updates?
    I've just turned off and all is well so far.

    Hello

    References to Vista also apply to Windows 7.

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

    How to do a startup repair in Vista and Windows 7
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the system - Vista Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    This tells you how to access the system - Windows 7 Recovery Options
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to do a system restore in Vista and Windows 7
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a disk of Vista or Windows 7.

    Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
    x 64 64-bit and even for versions of Windows 7.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------

    If necessary, you can get free reports of incidents.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • restarting my computer on windows xp load screen when I try to boot from the disc, I get a blue screen can someone help me?

    Recently, I restarted my computer and received the following message is displayed:

    "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

    If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

    If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
    Normally.

    Safe mode
    Safe mode with networking
    Safe mode with command prompt

    Last good Configuration known (your most recent settings that worked) start Windows normally

    Use top and down arrow keys to move the selection of your choice.
    .
    Seconds until Windows starts: 30 "

    After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.

    I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.

    I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)

    The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.

    Hi josiahgenesis,

    ·         Have you been able to launch the repair facility?

    Try the following.

    Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.

    Method 2: Check to see if the following is useful.

    You receive an error message "Stop 0x0000000A" in Windows XP

  • Laptop stuck in the Windows Resume loader

    I have toshiba satellite laptop and my keyboard stops working. While I started the computer I accidentally unplugged the computer will be of that load. Now my computer is stuck in "Windows resume loader" and I have no way to push enter to skip this screen. I can't push f8 to enter safe mode either. Help, please!

    I ordered a new keyboard, but it does not work either.

    Hello

    I suggest to boot from Windows Vista DVD and run the Startup Repair tool and check.

    Startup Repair: corrects some problems, such as missing or damaged system files that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

    Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

    What to do if Windows does not start correctly: http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    Diana

    Microsoft Answers Support Engineer

  • U410 won't start - stuck in the Windows loading screen?

    Hi, I have a U410 that no longer starts. Don't know what he did stop. At startup, it loads the startup Lenovo screen, then the loading screen Windows 10 forever (balls chasing each other in a circle). I can't get combinations of keys F bring me to the BIOS. I tried to use the Novo, but not the work of options other than the restoration of the system. They all display the startup Lenovo screen, then the Windows 10 loading screen.

    I created a bootable USB floppy and USB boot, but I never have an option to get the BIOS or choose another Boot device.

    Thanks for the answer, it turns out that it was the hard drive.

    There's something corrupt on it and it wouldn't start. I took and connected to another machine, but he was not recognized by the BIOS or Windows. I returned to the U410 and starts in with the Novo button restore mode. Curiously, it worked and I was able to restore the machine back to original settings and then upgrade to Windwos 10. I lost all data on the HARD drive, but it's normal. She has been saved and most of the records is anyway in the cloud.

    Not trusing stability of this HARD drive, I decided to replace it with a Samsung SSD. It was a great experince. Samsung provides a disk copy utility that works on the HARD drive running! A took about 45 minutes to reflect the existing for the connected SSD HDD. After that, I have swapped drives, ran the optimization of SSD and it was good to go.

    The special tools required for this were opening and pry tools and an USB HARD drive adapter. There are many videos on YouTube that show how to open the laptop.

  • I got this after my laptop 'stuck' and I had to restart everyting = "Basic error of data that can be updated windows found 0 x 80070490"

    My laptop 'stuck' and windows wouldn't load, I had to restart everything (I'm not a technophobe!), on the fact that he told me that I needed to update back to 8.1.

    However, I could not do this as he told me that I had to update windows 8 first of all - but update will not work.

    What do I do on Earth?

    http://support.Microsoft.com/kb/958044/en-us

    Windows Update, error 0 x 80070490

    Step 1: Use SFC system to repair damaged Windows files use System File Checker to repair damaged Windows files. To do this, follow these steps:

    1. Open an elevated command prompt.
    2. Run the command "sfc/scannow".
    3. Try installing the update again.

    For more information about the System File Checker tool, see using the tool File Checker system to repair missing or corrupted system files

    (http://support.microsoft.com/kb/929833)

    . Step 2: Run the DISM tool if the problem persists, use the Deployment Image Servicing and Management (DISM) tool to fix corrupt Windows Update errors. To do this, follow these steps:

    1. Open an elevated command prompt.
    2. Run the command "DISM.exe Online/Cleanup-image /Restorehealth".
      Important When you run this command, DISM uses Windows Update to provide the files that are necessary to fix corruptions. However, if your Windows Update client is already broken, use a Windows install running as the source of the repair, or use a Windows side-by-side folder from a network share or removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:

      DISM.exe / Online/Cleanup-Image /RestoreHealth / Source: C:\RepairSource\Windows /LimitAccess

      Note Replace the placeholder C:\RepairSource\Windows by the location of your source of repair. For more information about using the DISM tool to repair Windows, refer to a windows repair Image

      (http://technet.microsoft.com/en-us/library/hh824869.aspx)

      .

Maybe you are looking for

  • Qosmio G30 - 161 - recovery disk does not work

    Hello world I need help to understand what happened with my laptop G30-161 The last time I tried to reinstall the product recovery things was wrong.The time where computer supposed to install windows then a blue display screen and stops the process a

  • Z500 grey screen

    Hello I was using my touch Z500 tonight as normal when suddenly the gray screen and I can't do anything to change it someone can help please?

  • Loss of data from the external hard drive Verbatim

    Original title : Verbatim Back Up unit Somehow, I had saved my original Windows XP files and photos on my Verbatim block that sits on top of my desktop Tower.  Connects to the computer with the USB cable and is on port G.  For the sake of unnown, whe

  • Lifelog not showing steps

    Yesterday, when I started to the watch I had the window with how many steps I did and it looked like lifelog. Today my watched unloaded and exploded and when I loaded 100% I as well as measures did not show. I think it happened after 2 updates, but I

  • some seem to got my account and sent by email to all my contacts / I need to have it stop

    soimeone is currently using my accountant and I need this piracy stop immediately. I don't know how long it goes, but I need to have stop