Laptop Toshiba DVD RD/CD RW ROM not recognized after Vista installed

My Toshiba laptop which has Windows Vista cannot read my ODD.  A month ago I had the same problem which was worst, could recornize not WEIRD at all.  Now, it recornizes ODD, however, after the execution of this program to fixhttp://support.microsoft.com/gp/cd_dvd_drive_problems, still reads at all.  Please help me!

Hello

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

============================================================

If necessary check with the help of Toshiba, their drivers online (update or reinstall) and their forums.

Toshiba - Forums
http://laptopforums.Toshiba.com/

Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

Toshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

Toshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Satellite Pro L510 - computer laptop Toshiba DVD - RAM cannot read disks

    My laptop toshiba Satellite Pro L510 computer may not play all discs as I installed Microsoft Expression Studio 4 by using the original CD... now whenever I insert a disc, the dvd - ram turns the disc for a few seconds and thn stops spinnig.

    Then drive shows that there is nothing inside the disk and it is completely empty.

    I can't even restart my operating system discs cannot be read from the bios either.
    I uninstalled the drive, the updated drivers, but it did not help. Please help me, I really need to use dvd ram... I use windows xp sp2 and using the laptop for 8-9 months...

    Help, please!

    http://www.Microsoft.com/UK/expression/products/StudioUltimate_SysRequirements.aspx
    According to this statement you must have installed Windows XP SP3 home edition.

    Your ad is a bit confusing to me. You have a problem with the functionality of DVD - RAM or optical disc drive cannot read all drives (different CD, DVD, DVD - R formats. DVD + R and so on)?

    I put t know what is the problem with the optical disc drive, but way generally, an installation of software packages has nothing to do with ODD when you use it as first boot device.
    > I can not even restart my operating system discs cannot be read from the BIOS either.
    Restart or reinstall?
    Is a readable recovery DVDs when you try to start the recovery image installation?

  • Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

    HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

    Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

  • Satellite L10 - battery not recognized by Vista MS

    Hello

    I use MS Vista on my Satellite L10 and everything works great except my battery which is not recognized by Vista. There is just an unknown device in my equipment manager. In the section on the homepage Toshiba drivers I couldn't find a driver or other instructions. The MS Hotline told me this isn't their but question Toshibas.

    I hope that this forum is someone who can help me solve the problem. I just want to know if my battery has enough power for 20 minutes or 2 hours and I really hate it if my laptop is suddenly out of power.

    Thanks in advance.
    Christoph

    Hello

    You have installed Vista on the L10?
    Wow I know Satellite L10 is not Vista capable and you should be happy that this OS works without big worries on this Satellite phone.

    However, I recommend the Vista update to the last State, to install the compatible chipset from Intel page.

    But I assume that the BIOS on this laptop is not fully Vista capable that this question therefore appears on the L10.

  • Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

    Original title: Vista does not load after you install Microsoft updates

    A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
    I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
    At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

    Hello

    Try the methods provided below and check if that helps.

    Method 1:

    Step 1:

    Try to boot in safe mode with network and check if you are able to boot to the desktop.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Step 2:

    If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

    Microsoft safety scanner

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note:
    The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    See also:

    How to remove a computer virus?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    Method 2:

    Clean boot

    If the problem does not persist in safe mode you can also perform the clean boot.

    Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note:

    After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 3:

    Try the system restore by using the System Recovery Options.

    The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

    For more information click on the link below.

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    Please keep us updated on the State of the question so that we can help you further.

  • print DigitalPersona finger scanning does not work after you install the recommended updates

    My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

    Hello

    1. do you have an error message?
    2. are you referring to the print scan hardware or software scan print that was supplied with the device?

    Method 1:
    I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

  • Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

    Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

    I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

    Kind regards

    Mitch

    Hi Mitchell,

    Please uninstall and reinstall the ESET program and check if it solves the problem:

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    For further assistance:

    ESET knowledge base

    http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

    Please post us with the result.

  • Installation of Adobe flash not recognized as being installed on my mac?

    My daughter is trying to play a game on the site 'Sumdog' and I've updated my web browser, such as recommended

    by Apple in Yosemite, uninstalled, reinstalled, logged out of safari, running my mac and the game's website still is not recognized as being installed on my mac.  It will allow me to activities related to change, & other things but not play a game?  Any ideas?

    Click here to see if flash is installed, help Flash Player

    If this is not the case, go here do a clean install

  • Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

    Hi all

    I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

    I installed the latest BIOS v2.50 as well as the latest Windows patches.

    To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

    I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

    Mounting frame is also OK (tested with the original Toshiba DVD ROM)

    Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
    What is generally a problem

    Thanks for reading my ad and you answers or advice

    Klaus

    Hello

    It won't be very easy get your new work of drive on your S1, I will explain why:

    Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
    their place according to the requirements of the laptop.
    Three settings are available: master/slave/CableSelect

    Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
    a disc factory settings in bulk comes as a disk Primary Master or CS.

    There are two options how to get to missing jumpers to make it work.
    (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
    (2) by a bridge of material on some pins to the back of the drive.

    As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

    As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
    According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

    start of quote:
    Dear Sir.

    The drive is detected beeing as a master drive.
    This setting cannot be changed. Are there no rider to do so.
    How mount you the device to your laptop, it's up to you.
    It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

    Kind regards
    end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

    As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

    Concerning

    chain

  • Toshiba DVD player - player ODD do not watch movies, the disc is missing

    This is the text that appears when I run the TOSHIBA DVD PLAYER:

    "The specified drive is not found. "Check the settings by going to settings-> actions-> Source settings, or otherwise verify that disk has been correctly connected to the PC.

    I played movies on my laptop before; I guess that is something to do with all this updates a month that I ve been getting. At least 4 every day.
    I also did it said the warning sign and still nothing, when I checked for the latest version of the driver, he was told "you have the updated driver for your computer.

    Does anyone know how can I get my rear driver for my daughter & son can once again watch the movies?

    Hello Ricky

    In your message I don't understand one thing: you have a problem with a Toshiba DVD drive or optical drive?
    Can you please make little test?

    Download and install VLC media player (it's free) and test the functionality of optical disc drive.
    To be honest, I use VLC for years and this is, for me, the best player I tested in recent years.

  • CD/DVD-ROM not recognized since the installation of Vista, without errors

    Installed Vista and lost CD rom? CD works can be heard during the execution but system will not find CDROM? Deleted upper and filters low but still will not find CD ROM?

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • DVD - ROM not recognized with setting of M/S

    Hello, I just bought a DVD SD-R2412 drive to replace my dead drive (same model). However, my old drive was CSEL type and this news is M/S. I didn't know there were differences in the same model. This new drive is not recognized by Windows XP (SP2) and disappear the second IDE controller. In addition, it is not possible to boot from the CD, so I guess that the BIOS is also not recognize the drive.

    I saw an exchange of views on the reverse (CSEL M/S, new old) and some solutions for this case, but I have not seen all the comments on my problem.

    My guess is that the drive is configured as a slave and the BIOS is not able to recognize in this position. If so, the question would be if there is a way to configure the drive M/S to act as a master.

    Any ideas?

    Thank you.

    Hello

    It will be very interesting to know what unit of Toshiba you have. As far as I know, the drive is already set to slave, but I put now on exactly the position of the rider. However, take a look on the label which is located on the drive. You can find a picture how to affect the small rider master or slave.

    Best regards

  • CD/dvd-rom not recognized Vista

    I uninstalled and do reinstall the driver for my dvd player. I see that I have the disc but it will not read anything. I can hear it trying but nothing appears. I can not burn on raw either. I need help and Mr. fix, that it does not download for some reason any.

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • CD rom not recognized

    CD-rom is not on my laptop. I need help... Please

    I need help, try to re - install the CD in my laptop.  I recently updated my itunes but I'm not sure if it is the cause of cases when I opened to see what cd's in the computer, there is no player that shows a cd is inserted in my laptop.   How can I go about fixing this problem?  It's been about 2 months ive heard a cd on my laptop.

    * Note: I tried the FIXIT button and nothing.

    Hello

    Having too many CD/DVD programs can cause problems, because they will be competing for resources if
    its best to select one or two you like and work with them.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Toshiba L 39 4353 TV is not certified after Windows update 8.1 Windows

    The TV worked fine on my computer with windows 8, but after I updated for Windows 8.1 it is said that the TV is not certified windows. Anyone have any ideas? The TV is equipped with the latest updates and fact the computer.

    I think it's a bad place for this question, because this issue has nothing to do with the Toshiba TV.

    I have no idea how the Windows 8.1 update works for other computers, but if upgrading 8.1 to Windows on computers laptops Toshiba, all tools and drivers must be updated to version 8.1 of Windows also.

    I put t know how you plugged the calculation of this TV but it s recommended to repeat the connection procedure after the update of any system.

Maybe you are looking for

  • Helmet whistle after only 4 time under assistance

    Hello to everyone I own a Macbook Pro 17 "[start 2011]. OS X Yosemite 10.10.5 Forgive me for the long description, but it seems that one problem has evolved into several ones and I, on my own, can not find a solution. On 24 February 2016, I took my c

  • iPad Pro - questions before you buy

    I buy the iPad Pro 12.9 ". I have an old computer Intel iMac with Leopard (I know - obsolete). My questions: -Can I connect the iPad to my computer and access to the files of my iMac to download on the internet on my iPad? -Can I connect a Kensiingto

  • Re: Need new Stand/Base for TV

    I had my TV mounted on supports, but move to a rental so I just need to put the TV on a stand, BUT I'm not. Anyone know where I can get a new one?

  • How to type letters accented with Satellite L300D?

    I recently bought a Satellite L300D laptop and I need to be able to type in foreign languages. On standard keyboards I use the Alt key as the numeric keypad to achieve, but I can't understand how this works on this laptop (holding Fn and Alt don't wo

  • pilot SDHCI T420?

    My T420 has an element in the device manager that I can't find a driver for. He called the 'Base system device', and he has this hardware id: VEN_1180 & DEV_E823 & SUBSYS_21CE17AA & REV_05 PCI Where is this driver available?