Laptop Toshiba Windows 8 failure to configure the updates... Returning from endless loop

I bought a new laptop (Toshiba Satellite C55-A5281) with window 8.  Once through the new normal computer set up, I saw that there were 108 updates for Windows 8.  Yes, it's a hundred and eight!  OK, may as well do before loading anything on the new computer, right?

Hours and hours later... I was always in an infinite loop.  I've been through all this hit F8 once forcing them to close and restart upward... then made the deal of refreshing to try to fix.  Then, I started the whole update process on and got the same thing... Hours later, once again.  I actually let it run all night.  Same ugly loop once again.

Maybe doing 102 updates at the same time, it is not a good idea.  But I have no idea of those who to try to do first.  Or exactly how just a little at a time.  And if I have to do one at a time, and each takes hours, I can't live that long...

Any suggestions would be greatly appreciated.  I knew before Windows 8 would be a challenge... but unfortunately it seems a lot harder than I expected.

I did the full restore... and then did a full reformat reset it all back at the factory.

Then I did some updates at once instead of 102 all at once.  It took forever, but seems to work.  Then I got a notice of update to Windows 8.1.  I did that as well (took hours) and everything seems to work now.  I have probably 20 hours of downloading (and wait) and the download time (and waiting) with this.  I hope it's over and I can go on living it normal.

Tags: Windows

Similar Questions

  • Failure to configure the updates on Windows 8

    Whenever I try to update my laptop windows8, it installs the updates, restart, fails to set them up and go back. I have the laptop plugged into the wall and the ethernet cable to ensure that there is no interruption in the diet or by internet. I'm kinda a waste since I can't go to 8.1 without having to install updates 1. I tried to go into the settings of update, but it fails to do so by using this too. What is McAfee? Any help would be welcome.

    Hi Meg,

    Please contact the Microsoft Community.

    I wish that refer you to this article-

    http://support.Microsoft.com/kb/949358/en-us#top

    Note: Make sure that you get the computer back to the Normal start once you have completed troubleshooting.

    I wish that you back up the data on the computer before you continue.

    Let us know if you need anything that anyone else.

  • can someone tell me how to change the quality of the sound on my laptop Toshiba Windows 8? Thank you

    Can someone tell me how to change the quality instllation on my laptop Toshiba Windows 8?  Thank you

    I would say more in the direction of http://forums.toshiba.com/ and asking your question related to Toshiba.

  • When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not it reboot. It says bootmgr missing. What should I do to restart?

    Can someone help me please! When I try to reboot my laptop (toshiba Windows Vista) displays a black screen and now I can not restart. It says systeminst9.wnm is missing. What should I do I restart yo?

    Hi Ashutosh,

     
    You did changes to the computer before the show?
     
    This error indicates that the boot sector is corrupted or missing.
     
    I suggest for the link and follow the steps in the article:
    Windows error message «Bootmgr is missing Press Ctrl + Alt + Delete to restart»
     
    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
  • Qosimo F20: WLan adapter forget window allows you to configure the settings

    I recently changed a linksys wireless router to bt home hub but white since doing so I have been informed of bt, the wireless network adapter (intel (R) PRO/Wireless 2200BG Network adapter)

    I use keep forgetting window allows you to configure the settings. so every now and again I have to right-click on the icon in the lower right, choose View available wireless networks, click on change advanced configuration, and then click on the tab and then wireless networks check use windows to configure the box at the top left.

    I'm very novice all help would be appreciated.

    Post edited by: johnsmith3131

    Hello John

    As you know all configurations can be specific and depend on the used material. Believe me on this path it is not easy to say something concrete, because the BT home hub white is unknown to me and can I just suggest that you carefully read the user manuals which must be detailed explain how to connect external devices to the hub.

    By the way: you have something like this http://digital-lifestyles.info/display_page.asp?section=distribution&id=3404?

  • why I can not install my printer driver on this computer laptop w/windows 8? I have the lexmark disk.

    I can't install the printer driver for my printer lexmark 2300 on the my new HP laptop with windows 8.  I have the lexmark installation cd.

    Hello

    Probably the CD was born before Windows 8 is why he knows nothing about this product "nice". Please visit the following site. Hope that your printer is still the list:

    http://support.Lexmark.com/index?page=content&ID=OS27&locale=en&UserLocale=en_AU

    If so, you can download driver from here, it is a product of Lexmark.

    Kind regards.

  • We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

    We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

    kathleenl62675526 wrote:

    Hi Tanuj,

    There is no place to change fonts.

    You must go to the LR Edit (or Lightroom on Mac) menu > Preferences > Interface > choose 'Options' in the menu 'panels '. There should be a setting for the font size of Interface. You will need to close and restart LR for the font change are taken into account.

  • I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

    I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

    You're right: 22020134.exe is the download of the installer of my link.  Did you use the serial number on the right of this download link?

  • Error message: "logon user interface host windows stopped working. & configuration of updates fail

    Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

    For your information, I use windows 8. so help me solve this problem. TQ

    Hi ZakwanSalleh,

    Thank you for choosing Windows 8 and join us on our community.

    From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

    We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

    Method 1:

    I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

    Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

    http://support.Microsoft.com/kb/929135

    Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

    Method 2:

    I also suggest you to run a sfcscan and check.

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

    Follow these steps to run sfcscan.

    a. press Windows + X keys and click / tap on (Admin) command prompt.

    b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

    NOTE: It can take some time to finish the race.

    For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358#method3

    It will be useful. For other related issues in Windows area it always welcome in our community.

  • My firewall of Windows 7 will not take the updates more

    How do update you my Windows Firewall that stopped taking updates?  Sound not to get your updates.  How can I solve this problem?

    A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

    The Windows Firewall doesn't in any way requires any maintenance feature.

    If you are referring to Windows Update.

    You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058

    Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

    http://support.Microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.

    I suggest before you stop and install the updates, disconnect from the Internet, first.

  • "failed to set up the windows updates. returning from changes. do not turn off your computer.

    Hello

    I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
    I have updated with the SW update
    The results of the troubleshooting online are:
    Problems encountered:
    Recent updates - not fixed installation problems
    Search for missing or corrupted - files detected
    Some security settings are missing or have been modified - fixed
    Registration for the service is missing or corrupt - fixed
    Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

    I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
    One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

    Hello

    Thanks for trying to help. Now my computer seems to be up-to-date.
    I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
    I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
    I did IE default web browser I have prob changed when I got to the computer.
    I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
    I ran the reset troubleshooting of Windows with the same result as before is to say:
    Recent updates - not fixed installation problems
    Search for missing or corrupted - files detected
    I think I have restarted my computer at this stage and then tried to update again.
    It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
    Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
    Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
    Thank you.
  • Why do I get restore window when opening firefox since the update

    Why do I get restore window when opening firefox since the update. I don't want to restore but it appears every time instead of my homepage as shown

    A likely cause is that you first close all Firefox Windows and then close the Firefox application.

    Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

    • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

    (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

  • Error code: 80070490 (Windows is unable to check the updates)

    I get the error code 80070490 (windows is unable to check the updates) I did a system restore, full scan, virus, malware, rootkit, adware and spy ware.  Downloaded and installed the suggested fix for this issue on the microsoft site.  Nothing seems to help.  Any suggestions?

    Hello Pstrjohn,

    Thank you for your message.  You can also click HERE for more information about the Windows Update error Code: 80070490.

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • My computer turns off to configure the updates while I was working on a document - is that it lost forever?

    Original title: lost documents

    My computer turns off to configure the updates while I was working on a document.  I didn't save it.  Can I get it back? or it is lost forever?

    If it has not been registered, he went. Bruce Hagen
    MS - MVP October 1, 2004 ~ September 30, 2010
    Imperial Beach, CA

  • c:\windows\system32\osk.exe, a referral was returned from the server

    My scren keyboard on does not: error when I try to use:c:\windows\system32\osk.exe, a referral was returned from the server

    Hi Kevin Urubek,

    1. what operating system do you use?
    2 is connected to the domain of the computer?

    Method 1
    If the steps above fail, I suggest to create a new user account and see if you get the same error message, the following link will allow to create new user account.

    Create a user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If everything works well in the new user account, then I suggest you to follow the article to transfer files and settings to the new user account.
    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Method 2

    If you're windows7, try the steps from the following link:
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

Maybe you are looking for

  • Battery indicator lies

    Hi, my battery on my iPhone indicator 6 acts weird. IT showes normal amount of battery for example 70% at 4-5 PM, then when I use it for a few minutes, he quickly falls to 5-10% then he sometimes climbs up to 30% sometimes not. But shortly after this

  • Z460 TouchPad could not scroll

    I use Z460 with E - LAN SmartPad installed on Win 7 (64-bit). My edge of touchpad can scroll upward or down before, but it does not work after changing some launch msconfig. If someone could help me which would be fantastic. Thanks in advance. / Alex

  • "Windows Update error code: 00000643"

    What do this mean and what do I do now?

  • Unable to load the Office jet 6700 software

    I am trying to load the series 6700 Officejet printer software on my Mac Book Pro.  It works fine on my pc with Windows 7, on the Mac it will load until I click on setup and get message "install hp unexpected quit" it HELPED!

  • You can compress files with Adobe Reader DC?

    You can compress files with Adobe Reader DC?