laptop turned off during the installation of window

Similar Questions

• accidentally turned off during the update of windows

  Guys, im using sony vaio with vista premium OS and it is automatically updated, I had used to remove my battery for use at home, during the update of windows, I accidentally kick off the power cord and it disconnected from the main power switch and turned off, when I open it I saw a note on the bottom right 'tm this copy of windows vista is not authentic.

  someone could help me on this guys, how can I do recover without reformatting my laptop.

  Please help me guys...

  Thanks in advance...

  Needless to say, cutting the current during the update process can cause all sorts of problems - many not even related to the update itself.  It is a common branching.

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  I don't know if this will solve the problem, but it might.  It's worth a try (and it can be useful if there are other problems that you have not yet detected).  Whether or not it works, you will need to re - install the update (and this time won't turn off - LOL).

  If you still have the problem of validation after system restore, and then click Start / computer / system properties and check the bottom of the Activation section.  Your system always shows that it is enabled?  If this isn't the case, then reactivate.  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  If this does not resolve the "not genuine" message, please post your problem in the Windows Genuine Advantage Forum: http://social.microsoft.com/Forums/en-US/genuinevista/threads , where the experts on this kind of problem will be more than happy to help you with your problem.  They will probably ask you to run a program and download the results so they can examine in order to find the problem - just follow their instructions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• laptop turn off during the start of the disc

  Hi, please could someone shed some light on why my laptop starts to boot from the drive (xp home).

  loading files, but just before initial restart.it turns off, but turns off resarts once again the button, loading files, then just before the reboot,

  h/d new mounted, good used ram 1 g, connected to the a/c

  any suggestions... Thank you.  Delmotte.

  Could mean that the CPU fan is going or if you have any non essential attached devices it might interfere with installation. I suggest that you run the diagnostic test on the module of memory just to ensure he could not be the culprit: Memtest86 + http://www.memtest.org I had a similar problem with my Dell Latitude only to discover that it was the motherboard died. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Screen turns black during the installation of Windows 8 on Dell Latitude E6400

  Hello

  I have a Dell Latitude E6400

  The specifications are:

  Intel Centrino 2

  4 GB OF DDR2 RAM

  HARD DRIVE 160 GB

  Core 2 Duo 2.53 GHz

  NVIDIA Quadro NVS 160M 256 MB DDR2

  I'm doing a clean install of Windows 8 pro 64 bit. The problem is that when I get to the stage where the installation application to connect to a wifi, all of a sudden, the screen goes black and then nothing happens. Sometimes I am able to move on to the next step where the installation process asks if I would like to use express settings or customize it. The same thing happens on this stage too. I could not go any further than this step.

  I tried dozens of times, even tried 2 different iso files and event tried a 32-bit Windows 8.

  Same thing happens evrytime, black screen and then nothing. I wasn't able to find that everything related to the internet.

  One last thing, if it's a problem of display driver, I can't set either because I already formatted my HARD drive.

  Can someone help me please:(c'est vraiment frustrant.)

  Thank you

  Hi shayanjalil,

  Dell Latitude E6400 has not been tested by Dell for Windows 8. You won't find drivers of Windows 8 for this system.

• Laptop Presario CQ57: during the installation of windows 8.1 ploblem

  During installation Windows 8.1 pro (64-bit) and when he finshed this error comes it please help

  What installation media that you are using and it's a version update or full retail Windows 8 Pro?

  Did you run Windows 8 Upgrade Advisor before you try to install it to see what needs to be addressed:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-7-tutorial

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• My computer turns off during an update to windows xp and now windows xp will not load.

  My computer turns off during an update to windows xp and now windows xp will not load.  It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options.  I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive.  I have the product key, but I don't know where or how repair the operating system.

  Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.

• Get a black screen during the Installation of Windows 8

  Original title: BLACK SCREEN

  OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro

  I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anyway
  So here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.
  I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help please

  Hello Kiwivic,

  Thank you for the question!

  I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.

  I need to ask you some questions to help you best.

  1. What is the brand and model of the computer?

  2 are the external devices connected to the computer?

  Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.

  Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Computer is turned off during the update of game time.

  Windows Update (set to auto) works if your computer is turned off during the update set time?

  I ask this for XP and Win 7.

  Thank you

  N °

  Assuming you want to say in fact 'off' and not 'sleep,""standby","hibernate"by 'off', or another version of not-really-off.

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• Mac lost during the installation of windows

  When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

  Hello smarthala,

  Thank you for using communities of Apple Support.

  I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

  If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
  Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

  Best regards.

• CPU stops during the installation of windows xp

  Hello guys,.

  I have a problem. Recently, I tried to re install windows xp but has failed to do so because the installation process stops in midstages due to the cpu locking. But I am able to install windows 7, although anyway windows 7 I have installed is very slow. I can't understand what is happening. I tried to install windows xp over 5 - 6 times and the cpu always stops. And I love windows xp and donot want to lose. Please tell me some ideas so that I can have my xp back in order. Help, please.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you arefacing of the questions during the installation of Windows XP. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  He would be grateful if you answer the following questions:

  1. you are trying to do a new installation or reinstallation of Windows XP?

  2. you are trying to do an install dual boot?

  3. do you get an error message? If Yes, what is the full and exact error message?

  First of all, I would say disconnect you all external devices except the keyboard, mouse and screen and then follow these steps:

  Method 1:

  If you try to do a fresh install, I suggest you to refer to the article and check if it helps:

  How to install or upgrade to Windows XP

  If you try to do a re-install, refer to article:

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  Method 2:

  I suggest you to run the Microsoft Fix it for Windows to fix performance problems of system to slow down Windows computers.

  If the problem is not resolved, please respond with more details and we will be happy to help you.