Laptop - Tv Hook up?
Hi all...
Good so I want to connect my HP Pavilion 6814ca [entertainment series] to my HDTV. What kind of product should I use and how do I do it. Help, please.
Thank you
Ginger
It is a question rather vauge. It depends on what you are wanting to do. Check your TV connections and your ntoebook. You can connect VIA S-video or HDMI, according to the connections of your laptop and who will take your TV. Decide what link you will use, make sure that your TV is set to the right channel of entry, and you should be able to view television. It takes the right cable for any format you decide to use.
Tags: Notebooks
Similar Questions
-
G62-340US: laptop freezes constantly
HP G62 - 340US Laptop, 3 GB, AMD Athlon II PC340 Dual Core 2.20 GHz, Windows 7 64-bit (product #XH066UA #ABA)
I just can't take more. Since the first day, this laptop has been poor performance. Hang in there too. Takes forever to open a program or a browser. Anytime you click anywhere, the blue spinssssssssssssss circle.
How can I reformat to factory settings if I do not all discs? I don't think this will fix the issue because it was so out of the box. I tried so many different things to boost performance (updated touchpad driver, updating the bios, remove the starting applications, etc.) but it does not matter. I was going to upgrade the RAM 8 GB / 3GB, but I don't think that it should be considered to prevent him from hanging.
Just want to go back to factory settings and re - assess.
Thank you.
Hello and thanks for the display on the HP support forums.
With a laptop computer hooked up here there's several reasons for this.
Have you cleaned your laptop to reduce the accumulation of things on the heatsinks and fans for the laptop can be cooled?
Have set you your system power settings?
Did you run the diagnostics of hardware BIOS to see if it is a RAM problem or hard drive?
If this is not the case, here are a few links to check.
Laptops HP - diagnostic system (F2)
Regarding the recovery of the system, there is a link on how to do so.
Performing a recovery of HP (Windows 8) system
I hope this helps you.
Thanks again for posting and have a great day.
-
I am running "Vista Home Premium" on my laptop and hook sometimes my HDTV to the "HDMI output for watching movies. Since the last time I used this release my internal speakers have stoped working. All sounds controls say that everything works fine, but no sound comes through the speakers. Help!
Hi mgoodman6761,
(1) you get an error message?
Method 1: You can follow the steps mentioned in the link below
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
See also the link below
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Re: Satellite L550-1CC - battery is not at all
Have had the laptop for 4 weeks. No problems. Went to use it yesterday and during use obtained indicates that the battery was low. However, laptop was hooked to the power cable and the green light indicated the laptop power. Seeing of battery orange flashing intermittently, but the laptop is not in mode 'sleep'. Battery won't charge at all.
Any ideas?
This taking of * Toshiba Technical Support *.
:
1 unplug the computer from the power adapter and turn it on. Let the computer battery power until the computer turns off, indicating that the battery is fully discharged.
2. remove the battery.
3 with a cloth, wipe the battery packs connectors and adapters AC connectors. Reinsert the battery.
4 plug the power adapter from the computer and check the wall outlet, ensuring that the connection is firm.
5. when the PC is off, let the battery charge until the icon or the battery light turns green. Disconnect the power adapter. Remove the battery. Wait 30 seconds and reinsert the battery.
Reconnect the AC adapter. -
EliteBook 8740w: HP elitebook 8740w mobileworkstation
My HP elitebook 8740w mobileworkstation, continues to give me a message unknown device is not a driver & shows the problem with the PnP devices. Trying to use my laptop to hook a projector, but it will not mirror or even appear on the screen. Can anyone help?
Hello:
I doubt that this missing driver is the cause of the video problem you are experiencing.
However, you need the driver for this device.
This package provides HP 3D DriveGuard to the notebook models and operating systems. HP 3D DriveGuard receives notifications of the built-in accelerometer and protects the hard drive (HDD) by automatically "the heads of parking" to reduce the risk of damage if the laptop is accidentally moved or deleted.
FTP://ftp.HP.com/pub/SoftPaq/sp53501-54000/sp53795.exe
As much on the PC do not project onto a screen, the only suggestion I can offer is make sure you have installed the driver of graphics for model graphics card that has your laptop.
There are pilots of 7 cards listed on the support page, so unfortunately, I don't know that you need.
A missing graphic driver is usually the cause of problems like this.
-
My laptop recently hooked and I couldn't even do a ctrl/alt/delete to run the programme of work to see what was going on, so I turned off manually. At the start, I have a black border running down the right side of the page and can not see the taskbar at the bottom. I put in 1280 x 720 resolution to allow access to the bottom task bar. I updated the driver for the display, but this did not remedy the problem. How can I go back to 1280 x 800?
FIXED! Last series of Microsoft updates have cured the problem. The resolution is now in 1366 x 768 (recommended)!
I can't think I powered the phone turned off when microsoft have downloaded updates, too bad Microsoft doesn't inform you they do this and then freeze you :-(
-
How can I install D - link DP-301 P + with Windows 7 64 bit
I have a printer HP 2100 that I would like to make available through our home network (Verizon FIOS wireless router). I bought the D - Link DP-301 P + print server and am a frustrating time to operate. I'm not very technical, so the useful comments on the D-Link site were Greek to me. I need the "Print Server installation for Dummies" version...
I can't get my laptop to talk to the web interface for the PS. I think it's a problem with the IP address, but I don't know what to do about this. If I could figure out how to set a static IP on the laptop that will be like the print server will not the router like the cell phone more?
Someone had a very good suggestion about resetting the print server and then the router will assign a new IP address to him. Unfortunately, I do not see a reset button on this model.
Help please...
Answering my own question, but I would like to know how I would have done it...
I found an older laptop and hooked it directly to the print server (PS). I was able to assign the IP address of the laptop for the specific connection you could see the PS. I was then able to access the configuration tool for the print server. Once I put the IP for the PS to one our network saw and past the cable back on our router... Happy Days!
I guess I could have done the same thing, without having to connect the old laptop because I end up by using the software PS Admin, but if anyone has a more elegant solution, I'd still like to hear.
-
HP Slimline s3307c network card does not
The network card has stopped working, power cord is good, light, not flashing, no light on the active demonstration, no change of pc, said driver works correctly, tried to uninstall the Nvid1Anforce drivers and then reinstall, has not set, this happen once before and I took it to BB, they ran some tests and said that the adapter has been bad bought an external adapter, don't have not installed and connected pc for one last try and the adapter worked. Tried to disable the adapter edge then rebooted, then stop and reactivated adapter driver installed but still does not.
Packed in a box and went to BB, put on the bench and it maybe bad market, suggested tech router port or cable. Bought a cable just in case, although the former cable worked with my laptop. Hooked and well his work. I concluded that the motherboard has a defect and that the vibrations of drive around with the PC in the trunk solved the problem. The previous route took a round-trip to resolve, this time, he took the trip only one-way to BB. I guess the next time that I'll just load it in the trunk and walk around the block several times. I would try pushing gently on some chips, although it may cause a complete failure. The next time it fails, I'll do some pushing on the chips. Thanks to those who provided suggestions.
-
can I print from a laptop if wireless printers hooked to office without card wierless?
I have my printer HP Deskjet hooked to my office, is there a way I can print from my laptop without wireless card?
Thank you, you are welcome.
Frank
-
My laptop Windows XP seems to want to treat my broadband as a dial-up connection and, of course, there is no phone line hooked up. I tried to create a new connection to broadband under network connections and also, the unit seems to work fine. Any suggestions please?
original title: I can't connect to the internet.Hi anthony meechan,.
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article.
Windows wireless and wired network connection problems
How to reset the Protocol Internet (TCP/IP)
-
laptop will not hook up to wifi interenet is active ping test has not everything past idk what to do please help!
If this problem started since the recent Win7 updates then: -.
The KB2705219 update could be the cause and uninstall that solved the problem for some users.
But...
In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee
While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.
I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].
I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat
-
A few months ago, I put my wireless system because I bought an I - Pad. Everything works fine. A friend visited outside and wants to connect with his laptop and I don't know the username, but when I click on my username wireless, it asks for a WEP or WPA key. I remember having to enter that when I initially set up my wireless, but where can I find that once again? Thank you.
When you configure your router at the start, you must have defined a key WPA or WEP, according to which encriptación you have configured. or you worked the factory settings. If you did the first case, you remember, you? If the latter, then default values will be described in the manual that came with the router, or you can download from the web site of the manufacturer of the router.
-
How can I disable the message from Microsoft for WINDOWS 7 that "7cannot Windows Installer while your battery is in your laptop".
I have pluged my power cord power supply for a constant regular to diet at the same time?Hi, Sandy
The Windows 7 upgrade has nothing to do with Windows Update. Transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
TIP: You may need a new battery (especially if it's more than 2 years & you have always kept inserted in its Bay while running on current alternative).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
a lexmark can be hooked to a computer dell laptop and if so Ineed help
I have an old lexmarkx4550 and it's hanging a computer work dell laptop but geti Icant tt work can you guide me through this process
Hello
1. what happens when you connect your printer to your computer?
2. When you say "I can't make it work", do you mean that it does not print once you have connected it to the computer?
3. If so, what is the error you get when you try to print?I would have you go through the process to install once more following the steps of the Lexmark pdf file below.
http://images.Lexmark.com/publications/pdfs/2007/3500/v2103618_en.PDF -
HDMI cable hooked up to the computer laptop and TV no sound coming from the TV only to laptop
HDMI cable plugged laptop tp and TV no sound coming from the TV only to laptop
[Transferred from Internet Explorer]
Hello
I suggest to check the audio device by default and check if it helps.
Set the audio output device by default using steps below:
a. click the Start button and then click Control Panel. In the search box, type sound, and then click sound.
b. click playback devices.
c. Select the default device (internal speakers or speakers of HDMI output) and set it as default to make the sound come from specific device.For more information, see the following Microsoft article.
http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds
http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV
http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions
Maybe you are looking for
-
Hi all. I was wondering if it is possible to write to a file of trajectory control. Right now I use control path of file for selectable modules that is then written to a configuration file. From the beginning, I want the config read to write in the s
-
I can't start my computer beyond the blue screen. It is said that a problem has been detected and windows has shut down to prevent damage to your computer. It displays the above technical information. Help please! Thank you.
-
my pc moniter went to a black screen but its continuous I was watching a tutorial
I was watching a tutorial windows my screen suddenly went black moniter the continuous noise and I can not start it?
-
When I click on a link to e-mail pdf, I get a message asking if I want to open or save this file. I click Open but I get the same message again. How can I download the pdf files correctly?
-
I get the message "a change to your Windows license." How can I solve this message?
I get an error of Activation on a laptop I bought 2.5 years ago. I didn't change anything, but the computer when you connect on a user displays account now 'a change to your Windows license." I have tried using the Product Code on the bottom of the