Laptop will not be updated

I've had my laptop for two years and all the time that I got it, it will not be updated.  I got it may of 2013 and it is March 2015.  Whenever I try the update, it goes through the loading and the "Please wait" etc., it will restart and then continue to be updated.  As soon as it should be done and put up to date, it is said, failure to convert the changes. Restoration of the changes.

And I'm at square one.

I tried to put it on the auto update, the same thing.

I can't update Windows 8.1, obviously, because he did not update anything to the system since I bought it.  Its a Toshiba and other than that, its great, no problem.

JUST DOES NOT UPDATE. Help, please.

I am seriously considering to try a factory reset.

Thank you.

Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
http://Support2.Microsoft.com/kb/949358

or

Perform a SFC scan to see if there is any corrupt system files.
Use the System File Checker tool to repair missing or corrupted system files
http://Support2.Microsoft.com/kb/929833/en-us

or

Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
http://Support2.Microsoft.com/kb/947821/en-us

Tags: Windows

Similar Questions

  • My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

    My laptop will not stop "updated" & restart. What's weird, is that he is not yet updated anything (0% - 3/3) and will go directly to restarting on & more? What should I do? (I have windows vista)

    Husband confused,

    The link below has options to solve your problem of loop.

    http://support.Microsoft.com/kb/949358>

    06/15 / 1104:36: 37 pm

  • my laptop will not be updated! error 80240016 it has never updated anything since born!

    I bought my insipron 1520 like 2 years ago! and since then it has never updated anything! I can not install any antivirus, update or anything! He has 17 important updates. When I press the button install it shows this error 80240016, and it is not up-to-date. Please help me cause my laptop gets slower than ever and gives me a big headheach!

    Thank you

    Luis

    Well, it came with mcafee anti-virus and it worked for 1 year. I forgot to write that (sorry). It's my girlfriend's pc, but I have the same and it works fine.

    Your GF never need to subscribe to the McAfee preinstalled application or replaced prior to the expiration of the one year free trial...?

    Assuming Vista, see...

    Help: I got hacked. Now what should I do?
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My laptop will not install updates, please help?

    I have an old compaq laptop for 2 years and I sent it to corrected and to fix the problem, they had completely restart the computer, and when I run windows update told me I need to install an update to be able to get more updates, it installed fine, but when it checks the updates it does not find the latest update, he was able to install was published in 2007 and none in 2008-2009 and this concerns me because desktop Gets a new update every day, is that this problem will be solved?

    PS its market on vista

    Hello

    Run these two.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool
    and for Windows 7
    http://support.Microsoft.com/kb/947821

    Check Control Panel - Windows Updates - on settings on the left side.

    When you run Windows updates (after the above) are there any error messages?

    Hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Laptop will not install updates, error on fwutow40.dll

    Hi, I keep getting an error message when starting my computer laptop c:\WINDOWS\fwutow40.dll and updates do not install anyone can help

    Hello

    1. do you have service Pack3 installed on your Windows Xp computer?
     
    2. What is the error message is displayed when the updates of Windows do not settle?
     
    3. the youable to boot up to the desktop?
     
    4. What is the software or the hardware recent changes made to the computer?
     
    Please follow the links below to solve the problem.
     
    Method 1
     
    Start your computer in a clean boot to avoid conflicts with third-party software.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/929135

    Note:
    follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
    Check if you still receive the error message.
    Method 2

    Ffollow the steps mentioned in the article to help install updates.
     
    You cannot install some programs or updates
     
    See also the following articles of the KB Si the steps mentioned above fails.

    You cannot install updates from Windows Update
     
    Cannot install Windows updates
    I hope this helps.
  • HELP MY LAPTOP WILL NOT DOWNLOAD UPDATES OF SECURITY

    FOR 6 MONTHS MY COMPUTER DOES NOT REFRESH THE UPDATES OF SECURITY ON MY COMPUTER, I HAVE TRIED EVERYTHING THAT I CAN IN ORDER TO SOLVE IT AND AGAIN I USUALLY KEEP RECEIVE 643 ERROR CODE OR 649 CAN DO?

    The best solution and the way is to contact support support.microsoft.com and chose Microsoft to Windows update support team.
    http://support.Microsoft.com/default.aspx/pH/6527

  • Envy Notebook M6: M6 Notebook Envy will not install updates

    Hello

    My laptop will not install updates. He will get all the way to the end and then will say that he was unable to complete the updates. He then proceeds to uninstall and even repeats the process. I need help! Thank you!!

    Hi @Ashmeister,

    It was my mistake, I have worked with many customers Windows 10.

    Try to follow the step of Microsoft solve problems with installing updates

    I hope this helps.

  • I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

    I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

    Hi bobbymh,

    -Do you happen to remember the update has been installed?

    -You receive an error message when you try to start the computer?

    Follow the steps below:

    Method 1:

     

    Try to start the computer using the last good known Configuration and check if you can successfully start.

     

    For instructions, see How to start your computer by using last good Configuration known as Windows XP .

    Method 2:

    Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

    See to run the system in safe mode restore

    See also How to restore Windows XP to a previous state

    Method 3:

     

    Follow the steps listed in the following article:

    How to fix a computer that does not start

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

    My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

    Hello

    1. have you made changes on the computer before this problem?

    2. do you get an error code?

    Follow the mentioned article:

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

    Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

    WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    Hope the above information is helpful.

  • K010 ENVY: my laptop will not turn off

    Hello

    When I shutdown/hibernate/standby/resume my laptop, it will die completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If start/stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    You are welcome

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • my xp pro laptop will no longer updates from Microsoft.

    my xp pro laptop will no longer updates from Microsoft. I tried the automatic correction of Microsoft and a manual fix listed but not affect?

    This may have been following a 'clean' without a backup registry.

    Them

    Hi,

    It would help if you provided the WHOLE message and CORRECT, including all codes completely written word for Word - this can often help us identify the problem.

    If you think you know when it started, and it is recent, then see if a system restore to before that the problem will work.  If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

    When everything is fixed, get rid of any program you use to do a cleaning of the registry.  Even if it wasn't the cause, it could easily be the next time.  It is poisonous to your system and is not necessary because Windows is a research work on its own.

    ***************************************************************

    Try the following compliments of Alvise - MVP:

    1 open administrative tools by clicking the Start button, and then click Panel.In control of administrative tools type search box, click on its entry.

    2. double-click on Services.

    3. in the Services dialog box, click Background Intelligent Transfer Service (you may need to scroll to find it, the entries are in alphabetical order).

    4. observe the selection (indicated in the third column) State. If you see it stopped, click the right mouse button on the Background Intelligent Transfer Service, make sure that she she defined to automatic and click Start. (If it does not start, click dependencies and do the same for each of them to confirm that they are not the cause of it starts do not.) Continue to the end, then reverse at the beginning and see if she will now stay on automatic and start and stay started. Do the same for services that follow if they does not start).

    5. in the Services dialog box, click Windows Update (you may need to scroll to find it, the entries are in alphabetical order).

    6 observe the State of selection (indicated in the third column). If you see it stopped, click the right button of the mouse on Windows Update and make sure that it is set to automatic and click Start.

    7. in the Services dialog box, click workstation (you may need to scroll to find it, the entries are in alphabetical order).

    8 observe the State of selection (indicated in the third column). If you see it stopped, click the right button of the mouse on my computer and make sure it is set to automatic and click Start.

    9. close the Services dialog box.

    Reboot and see if that helps.

    *********************************************************************************

    If this does not work,

    In C:\Windows\SoftwareDistribution, find and delete the content (but not the folders themselves) records ONLY the following two: downloads and the data store.

    If this does not work, try this: click Start > run > paste the following command into the Run dialog box, and then press ENTER. Wait for the success message.

    % SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL

    If the above does not help, then I recommend the following in order of presentation:

    Try to reset components WU:
    How to reset the Windows Update components?

    Try the system update readiness tool:

    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Try the Fix WU Utility:
    Repair & difficulty of the Windows with Fix WU Utility updates | The Windows Club

    ***************************************************************************************

    I hope this helps.

    Good luck!

  • Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

    Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

    original title: VISTA VS. XP

    Your technicians say talk to HP

    Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

    You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

    I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

    Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

  • My laptop will not turn off...

    My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

    Hello

    ·         This happens even when the power chord is connected?

    ·         What is the brand and model of the laptop?

    Method 1:

    I suggest you to check the power settings on your laptop in safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

     

    Method 2:

    I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

     

    Method 3:

    I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Check out these links for help:

    http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

    I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

    Kind regards

  • I tried to update the shock wave and it will not be updated.

    I tried to update the shock wave and it will not be updated.

    Original title: I have a lot of problems with my laptop

    Try to uninstall then reinstall Shockwave.

    More info on Shockwave here...

    http://www.Adobe.com/support/Shockwave/FAQ.html

  • I have 2 plugins that will not be updated. Why is this?

    Ever since a few updates ago, 2 of my plugins, which are very popular, will not be updated. I get an error of initialization of the Application for the two. They are Adobe Flash Player and Adobe Reader. Thank you!

    Hi UnusuallyClueless, I know that the "Initialization of the Application" error is an error in the Adobe installer, which occurs AFTER you download successfully Setup and Firefox has saved.

    A possible cause of this problem is that the fast-download installer must connect to Adobe to other files, and some security software can block this. To work around this, try to use "complete" installers (also called "offline installers"):

    Flash

    Go on https://www.adobe.com/products/flashplayer/distribution3.html and in the first table, choose the EXE or MSI, you do not need both, for «browser plugin»

    Adobe Reader

    • If you already have 11 Reader or CD Player installed, use the Help menu of the program of verification of updates - it is more reliable than the site Web of the Plugin Check
    • If you need a new installer: https://get.adobe.com/reader/enterprise/ - after the installation, you should always use help > check updates, because Adobe isn't always bundle the latest patch in this download

    Edit: to verify if your Adobe Reader software is the most recent available in his series, you will find the history of update of your version on this page: https://helpx.Adobe.com/Acrobat/release-note/release-notes-Acrobat-Reader.html

Maybe you are looking for

  • some of the work of don´ keys

    works only viral key board

  • VSS 8194 ID event after installation of 4.6 STRUCK

    I've seen this with some customers separated now.  The error ID 8194 event appears on the Hyper-V with the installed HIT 2012 hosts. Has anyone seen this? The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface

  • bad Vista network configuration

    By mistake, I set up a public network and trying in vain to return to a private network.  Have not been able to do even if I say start a home network.  How can I delete the wrong configuration?

  • My bodyguard cut.

    I have a toshiba satellite L745-S4210, and when I play audio or video files including trying to look at things on internet sites, the sound stops for no apparent reason. Sometimes, the sound will play for 30 minutes and other times he will play for 3

  • transform a column with lines

    Hi allI have a tablecolA ColB                            1                                  answer12                                  answer21                                  answer32                                  answer4now, I want to result onl