Laptop will not go into sleep mode

Similar Questions

• Laptop will not go into sleep or Hibernate

  In the past two months my laptop has become more and more reluctant to go to sleep or Hibernate.

  Today, in spite of reboot several times, he wakesup immediately sleep and Hibernate rather like a reboot cycle: the light turns off, then she immediately roared back to life.

  Any suggestions on how to fix this?

  It wouldn't matter if stop and start wasn't such painstakingly long process.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  A Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network adapter power management,
  WiFi, Modem and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• System will not go into sleep mode or Hibernate mode

  I have my laptop set to this mode on battery power:

  Turn off monitor: after 5 minutes
  Turn off hard disks: after 10 minutes
  Standby: after 15 minutes
  Hibernate: after 30 minutes

  However, I don't know if the system goes to sleep, if the hard disks are turned off or hibernate if she is asleep. This sequence will actually happen? Or should I only select one of them (according to the monitor) and let others like ever (except for the screen)?

  Original title: I'm confused on feeding management

  Hi Dhinged,

  You can try the following steps and check.

  Method 1: Run the next Fixit and see if the problem persists.

  The problems of power consumption and extend laptop battery life

  You can also check the following items and check:

  How to solve the problems of hibernation and standby in Windows XP

  Unable to use power management features

  Method 2:

  We will try to restore the default power mode and check. To do this, follow these steps.

  a. click Start, click run, type cmdand then click OK.

  b. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Also check out the following link:

  Power Options overview

• My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  My computer will not go into Hibernation mode. I checked the hibernation mode. But when I close the laptop, I get a message saying prepare to Hibernate.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ============================================

  After the foregoing: a Fixit for Hibernate

  How can I enable hibernation on my Windows Vista computer?
  http://support.Microsoft.com/default.aspx/KB/929658

  How to reactivate the lack of Hibernate Option in Windows Vista?
  http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/

  -------------------------------------------

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My computer will not go into the mode "sleep" more even after switching on the control panel. __

  I made all the necessary adjustments to get the computer automatically go to sleep after inactivity but now it not to do so. It is used to do. I have Windows 7.

  Hello

  Maybe this will help:

  Windows 7 is not going to sleep<-- check="" this="">
  http://support.Microsoft.com/kb/976877

  ----------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------

  More that might help.

  References to Vista also apply to Windows 7.

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on
  Modem and so on.

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  Troubleshooting Windows Vista sleep and Hibernate (also Windows 7)
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  (also Windows 7)
  http://support.Microsoft.com/kb/950686

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Standby Mode Vista and a solution (also Windows 7)
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  
  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  
  How do I change the sleep settings in Windows 7 (including hybrid sleep)
  
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Laptop will not stop or sleep

  Hello

  I recently bought an Acer E5-571-54YJ.

  The laptop works very well and fits my needs for the school.

  Only problem I have with it is that it will not stop or go into sleepmode.

  When I stopped it after a few seconds when the screen goes black I mean the closed disc and fans to stop spinning, but blue remains on. I must then manually turn it off by holding the power button.

  Even with its in sleep mode. The light stays on and I can't turn it back on again. I have to first manually stopped in now the power button and then start it upward.

  I tried to disable the quick start, but this does not solve the problem.
  I hope someone can help me quickly because it's really annoying that I can't put it in mode 'sleep'.

  If you want more information, just ask.

  Greetings,

  Jean-Paul

  First of all, make sure that you have the latest version of the BIOS.  If the update to the latest version of the BIOS fixes the problem, then please don't read any more.  If the update to the latest version of the BIOS doesn't fix it, then continue reading.

  http://www.Acer.com/AC/en/us/content/drivers#_ga=1.190056232.264310007.1474604665

  

  -------------------------------------------------------------------------------------------------------------------------------------

  Do not read anything below, or attempt anything below unless you have the latest version of the BIOS and will always have the problem.

  If you have Haswell-ATU as the computer linked below - i5 4210U, then the only two known workarounds I know are using the Intel Management Engine interface driver 8.1 Windows 9.5 or install Intel MEI 11.0.0.1181.   If you have Intel Management Engine interface driver 11.0.0.1146 installed, it would be the problem.

  https://UK.hardware.info/product/269206/Acer-Aspire-E5-571-54yj/specifications

  http://community.Acer.com/T5/S-and-R-series-laptops/Acer-Aspire-S7-392-power-will-not-turn-off/m-p/3...

  http://community.Acer.com/T5/E-and-M-series-laptops/E1-572-won-t-go-into-sleep-any-longer/m-p/405847...

  http://community.Acer.com/T5/S-and-R-series-laptops/R3-471T-not-shutting-down-completely-or-turning-...

  Internet search or this forum.  There are tens of thousands of messages that describe problems associated with sleep/stop Haswell-ATU and Windows 10 and usually driver boost a/k/a turbo Intel MEI 11.0.0.1146 11.0.0.1146.

  Yet once, most people use the 9.5 intel management engine interface driver (a Windows 8.1 driver) as a workaround to resolve the problem.  Go to Device Manager and try to restore.  Roll back may or may not give you the Windows 8.1 driver.  You may need to install it manually.

• Vista will not wake from sleep mode

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  Have you tried...
  Start button > Control Panel > Classic view > Power Options > go to Plan you selected, click on change plan settings > click on change advanced power settings > on this new window, use the cursor, scroll down to multimedia settings, then click on the + sign in front of him. Click on the + sign in front when sharing media > change BOTH the "on battery" and "Plug-in" allow the computer to sleep. > click OK

  Now see if the computer will go to sleep mode.

  t-4-2

• Equium A60 will not wake from sleep mode

  Hello

  I have an Equium A60, my laptop is entered 'sleep' mode and when I pressed the button that flashes orange that nothing happened, after trying a few times still nothing happened.

  I decided to take out the battery to try to recitify the problem. Unfortunately no power now lights. All of the suggestions.

  Hello

  Strange.
  You said, you have removed the battery, but you left it for several times?
  Disconnect the power adapter and remove the battery from the laptop. Wait 15 to 20 minutes, and together the two sides again to the laptop!

  Please post again if the laptop works again!

  Good luck

• Laptop will not go to sleep when the lid is closed

  Separated from this thread.

  Same problem here. My settings say that my Toshiba will sleep when the lid is closed, but half the time is not asleep and I can feel it's hot and turns on the fan. I am so frustrated with this new laptop and Windows 8.1. Looks like too many bugs in the software or something. More I am working on the new laptop the more problems that I find, like screen discoloration as well. The forums are useless. I do what they say, and the problem is the same. Forget the call from Toshiba. Needless. Nobody will help unless you pay them money to subscribe. What customer service?

  Hello

  Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.

  This problem may occur because of any change in power on your laptop options. If the default is set to hibernation and standby modes, your laptop goes to sleep when you close the lid, but then the Hibernate timer comes in and wake up your computer first and trying to Hibernate. He cannot go to Hibernate directly from mode 'sleep'. Go into the power settings and either disable hibernation or set the timer on a higher value.

  To apply the same setting to all plans:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click choose the cover.
  3. On the page define power buttons and turn on password protection , next to when I close the lid, choose what you want your laptop to do, both when it is running on battery and when it's plugged in.
  4. Click on save changes.

  Tip: To save battery power and quickly resume working, select sleep. Sleep is a power saving state that allows a computer quickly resume the operation of full power (usually in seconds) when you want to start working again.

  To apply a setting to a specific regime:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click change plan settings for the plan you want to change.
  3. On the change settings for the plan page, click change advanced power settings.
  4. Advanced settings tab, expand it cover and the Power button, action lid, choose what you want your mobile PC to do when you close the lid, for when it runs on battery and when it is plugged in, and then click OK.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• E1 - 572 will not go into sleep more

  My Acer E1-572 don't go in mode "sleep" correctly. Instead, the screen turns off, but the laptop is still running, fans turn out this way. Any buttons I press on, the only way to reset the PC on is to hold down the button works / stop and turn it off like that, and then turn it back on.

  If your computer comes pre-installed with Windows 8.1, you can start over with vanilla free Windows 8.1 and then get 8.1 Windows drivers from Acer for the Web site. Then do all the updates of Windows via Windows update 8.1.  Then install Windows 10 through windows update (but do not install drivers Windows 10 from the Acer site after a few days of testing).  I don't think that the preinstalled software Acer has nothing to do with the problem.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Or if you want to try a shortcut ... just install the driver below. Disable your internet connection in the first place, because the update of Windows, try to quickly download and install the driver IMEI can be problematic.  If you have the latest chipset driver Windows 10 from Acer site, Windows update may replace the old driver Intel Management Engine, so the shortcut I suggest to not work.

  https://Downloadcenter.Intel.com/download/23091/Intel-me-9-management-engine-driver-1-5M-for-Intel-N...

  

  Of course, you want to back up your personal files before you try everything before.

  And you always have the possibility to order your original factory of Acer Store software (but this option is not free).

  http://us-store.Acer.com/eRecovery/RCD/

  http://store.Acer.com/store/aceramer/HTML/pbPage.globalStoreSelector/ThemeID.35703000

  So far, I'm not having any problem / forced stop sleep/gel/white screen/fans.

• IMac G5 will not load into recovery mode

  I have a 2005/2006 IMac G5. I started it yesterday, after a few years in the area. He started well, so I ran the updates. After the system shuts down, it has not restarted. When I turn it on it come to la? and file screen. I tried both Internet recovery mode and recovery mode, but it ends finally in the? and file screen, the screens of recovery mode to jump. I have an external hard drive with time machine back ups. When I restart with the hard drive attached and hold down option, a screen with a return of arrows and an arrow appears, but no hard drive does not appear above them. Any help is appreciated

  There is no recovery or recovery Internet in Mac G5. You can install the system is Leopard (10.5) and this can be done from the installation discs. The system initially installed a Tiger (1.04), once again, the only installable from installation discs. Either type of installation disc can be started from to perform an audit on the hard disk in disk utility. You cannot start from the Time Machine disk because it does not contain an operating system.

  Your first step is to boot from the floppy to install for any system you have installed - insert the floppy disk, and then restart holding + command + c. When it is loaded (which will take some time) go to the Utilities menu and choose disk utility: run the ERD. If it is able to correct any errors, you should then try to install from the disc.

• L50D-B satellite will not wake from sleep mode

  My satellite L50D-B - 16 Q won't get out of the way 'sleep'.
  When I turn on the power button so the NUMLOCK and CAPS LOCK light

  Hello

  How about this solution:

  • Disconnect the power adapter
  • Remove the main battery
  • Power button press and hold 30-40 long s
  • Reinsert the battery
  • Plug the power adapter
  • Press the power button

  Note: Repeat this procedure 4 or 5 times in the line and check if you could power the unit after each step

• Question of Smartphones BlackBerry Curve 8520 blackBerry. phone does not go into sleep mode?

  This just started today (I did not update the phone for a few days).  Usually after 30 seconds the phone being left idle, the keyboard and the screen turns off.  But now, if I leave the phone for an hour and she remains always on.  I checked the settings of backlit, and they are always enabled and 30 seconds.

  I have no idea why he started doing this, I hope that it is a "temporary problem" that will repair itself with an update - I can only hope!

  I found a thread where people with the 8300's have had a similar problem.  But it seems not quite to go out with a happy ending.

  Best regards

  Gavin

  Perform a simple reboot of the device: with the phone smart BlackBerry turned on, remove the battery for a minute and then reinsert the battery to restart.

• InDesign will not go into the mode of presentation

  For some time now, whenever I select the mode of presentation, InDesign makes me preview with a black background mode no matter what. He won't go to full screen. It will be on a zoom back is there some kind of fix for this?

  Try to restore your InDesign preferences. Here's how:

  FAQ: How to reset or 'trash' preferences?

• Pc monitor HP Pavilion laptop g7-1390sd will not return after sleep

  The monitor won't after "standby" mode. The only way I can get it back is to turn it off and then back on it has all updates.

  Hello MA750,

  I read your post on how your laptop is not able to boot after sleepmode, and I'd be happy to help you in this case!

  Since the only way to recover your laptop is turning on, then, I would recommend later in this document on a dispute with the sleep and hibernation (Windows 7) Modes. This should help wake up your computer when it went into sleep mode.

  To get help, I'll need to know:

  The version of Windows that you have installed on your computer.
  If your computer has completed all its important updates of Windows.
  If you have updated your drivers from HP the HP SupportWizard.
  If it is a current or recent problem.

  If you have added a new hardware or software on your computer.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning